public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Steve Kerrison <steve@stevekerrison.com>
To: Andreas Oberritter <obi@linuxtv.org>
Cc: linux-media@vger.kernel.org, Antti Palosaari <crope@iki.fi>,
	Mauro Carvalho Chehab <mchehab@redhat.com>
Subject: Re: [git:v4l-dvb/for_v2.6.40] [media] Sony CXD2820R DVB-T/T2/C demodulator driver
Date: Fri, 06 May 2011 11:42:19 +0100	[thread overview]
Message-ID: <1304678539.8670.29.camel@ares> (raw)
In-Reply-To: <4DC3C6FA.8070505@linuxtv.org>

Hi Andreas,

>From cxd2820r_priv.h:

> +/*
> + * FIXME: These are totally wrong and must be added properly to the API.
> + * Only temporary solution in order to get driver compile.
> + */
> +#define SYS_DVBT2             SYS_DAB
> +#define TRANSMISSION_MODE_1K  0
> +#define TRANSMISSION_MODE_16K 0
> +#define TRANSMISSION_MODE_32K 0
> +#define GUARD_INTERVAL_1_128  0
> +#define GUARD_INTERVAL_19_128 0
> +#define GUARD_INTERVAL_19_256 0


I believe Antti didn't want to make frontent.h changes until a consensus
was reached on how to develop the API for T2 support.

Regards,
-- 
Steve Kerrison MEng Hons.
http://www.stevekerrison.com/ 

On Fri, 2011-05-06 at 12:01 +0200, Andreas Oberritter wrote:
> On 05/05/2011 12:53 PM, Mauro Carvalho Chehab wrote:
> > +		switch (priv->delivery_system) {
> > +		case SYS_UNDEFINED:
> > +			if (c->delivery_system == SYS_DVBT) {
> > +				/* SLEEP => DVB-T */
> > +				ret = cxd2820r_set_frontend_t(fe, p);
> > +			} else {
> > +				/* SLEEP => DVB-T2 */
> > +				ret = cxd2820r_set_frontend_t2(fe, p);
> > +			}
> > +			break;
> > +		case SYS_DVBT:
> > +			if (c->delivery_system == SYS_DVBT) {
> > +				/* DVB-T => DVB-T */
> > +				ret = cxd2820r_set_frontend_t(fe, p);
> > +			} else if (c->delivery_system == SYS_DVBT2) {
> > +				/* DVB-T => DVB-T2 */
> > +				ret = cxd2820r_sleep_t(fe);
> > +				ret = cxd2820r_set_frontend_t2(fe, p);
> > +			}
> > +			break;
> > +		case SYS_DVBT2:
> > +			if (c->delivery_system == SYS_DVBT2) {
> 
> Is this driver compilable? I don't see the necessary changes to
> linux/dvb/frontend.h to add SYS_DVBT2 in your tree.
> 
> See below for a patch that I used for testing DVB-T2 internally.
> 
> Regards,
> Andreas
> 
> --
> commit e89f95641f29b7a4457e7a68649f4374933e36a2
> Author: Andreas Oberritter <obi@linuxtv.org>
> Date:   Mon Mar 15 14:43:52 2010 +0100
> 
>     DVB: Add basic API support for DVB-T2 and bump minor version
>     
>     Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
> 
> diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
> index f5016ae..6f06efe 100644
> --- a/drivers/media/dvb/dvb-core/dvb_frontend.c
> +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
> @@ -1141,10 +1141,9 @@ static void dtv_property_adv_params_sync(struct dvb_frontend *fe)
>  		break;
>  	}
>  
> -	if(c->delivery_system == SYS_ISDBT) {
> -		/* Fake out a generic DVB-T request so we pass validation in the ioctl */
> -		p->frequency = c->frequency;
> -		p->inversion = c->inversion;
> +	/* Fake out a generic DVB-T request so we pass validation in the ioctl */
> +	if ((c->delivery_system == SYS_ISDBT) ||
> +	    (c->delivery_system == SYS_DVBT2)) {
>  		p->u.ofdm.constellation = QAM_AUTO;
>  		p->u.ofdm.code_rate_HP = FEC_AUTO;
>  		p->u.ofdm.code_rate_LP = FEC_AUTO;
> diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h
> index 493a2bf..36a3ed6 100644
> --- a/include/linux/dvb/frontend.h
> +++ b/include/linux/dvb/frontend.h
> @@ -175,14 +175,20 @@ typedef enum fe_transmit_mode {
>  	TRANSMISSION_MODE_2K,
>  	TRANSMISSION_MODE_8K,
>  	TRANSMISSION_MODE_AUTO,
> -	TRANSMISSION_MODE_4K
> +	TRANSMISSION_MODE_4K,
> +	TRANSMISSION_MODE_1K,
> +	TRANSMISSION_MODE_16K,
> +	TRANSMISSION_MODE_32K,
>  } fe_transmit_mode_t;
>  
>  typedef enum fe_bandwidth {
>  	BANDWIDTH_8_MHZ,
>  	BANDWIDTH_7_MHZ,
>  	BANDWIDTH_6_MHZ,
> -	BANDWIDTH_AUTO
> +	BANDWIDTH_AUTO,
> +	BANDWIDTH_5_MHZ,
> +	BANDWIDTH_10_MHZ,
> +	BANDWIDTH_1_712_MHZ,
>  } fe_bandwidth_t;
>  
> 
> @@ -191,7 +197,10 @@ typedef enum fe_guard_interval {
>  	GUARD_INTERVAL_1_16,
>  	GUARD_INTERVAL_1_8,
>  	GUARD_INTERVAL_1_4,
> -	GUARD_INTERVAL_AUTO
> +	GUARD_INTERVAL_AUTO,
> +	GUARD_INTERVAL_1_128,
> +	GUARD_INTERVAL_19_128,
> +	GUARD_INTERVAL_19_256,
>  } fe_guard_interval_t;
>  
> 
> @@ -305,7 +314,9 @@ struct dvb_frontend_event {
>  
>  #define DTV_ISDBS_TS_ID		42
>  
> -#define DTV_MAX_COMMAND				DTV_ISDBS_TS_ID
> +#define DTV_DVBT2_PLP_ID	43
> +
> +#define DTV_MAX_COMMAND				DTV_DVBT2_PLP_ID
>  
>  typedef enum fe_pilot {
>  	PILOT_ON,
> @@ -337,6 +348,7 @@ typedef enum fe_delivery_system {
>  	SYS_DMBTH,
>  	SYS_CMMB,
>  	SYS_DAB,
> +	SYS_DVBT2,
>  } fe_delivery_system_t;
>  
>  struct dtv_cmds_h {
> diff --git a/include/linux/dvb/version.h b/include/linux/dvb/version.h
> index 5a7546c..1421cc8 100644
> --- a/include/linux/dvb/version.h
> +++ b/include/linux/dvb/version.h
> @@ -24,6 +24,6 @@
>  #define _DVBVERSION_H_
>  
>  #define DVB_API_VERSION 5
> -#define DVB_API_VERSION_MINOR 2
> +#define DVB_API_VERSION_MINOR 3
>  
>  #endif /*_DVBVERSION_H_*/
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


  reply	other threads:[~2011-05-06 10:48 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <E1QHwSm-0006hA-A9@www.linuxtv.org>
2011-05-06 10:01 ` [git:v4l-dvb/for_v2.6.40] [media] Sony CXD2820R DVB-T/T2/C demodulator driver Andreas Oberritter
2011-05-06 10:42   ` Steve Kerrison [this message]
2011-05-06 12:23     ` Mauro Carvalho Chehab
2011-05-06 12:36       ` Andreas Oberritter
2011-05-06 14:35         ` Antti Palosaari
     [not found] <20110506125542.ADA1D162E7@stevekerrison.com>
2011-05-06 13:46 ` Antti Palosaari
2011-05-06 15:30 ` Mauro Carvalho Chehab
2011-05-06 15:46   ` Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1304678539.8670.29.camel@ares \
    --to=steve@stevekerrison.com \
    --cc=crope@iki.fi \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@redhat.com \
    --cc=obi@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox