From: Steve Kerrison <steve@stevekerrison.com>
To: Antti Palosaari <crope@iki.fi>,
Mauro Carvalho Chehab <mchehab@redhat.com>,
linux-media@vger.kernel.org
Cc: Andreas Oberritter <obi@linuxtv.org>,
Steve Kerrison <steve@stevekerrison.com>
Subject: [PATCH 1/6] DVB: Add basic API support for DVB-T2 and bump minor version
Date: Sun, 8 May 2011 16:51:08 +0100 [thread overview]
Message-ID: <1304869873-9974-2-git-send-email-steve@stevekerrison.com> (raw)
In-Reply-To: <4DC417DA.5030107@redhat.com>
From: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Steve Kerrison <steve@stevekerrison.com>
---
drivers/media/dvb/dvb-core/dvb_frontend.c | 7 +++----
include/linux/dvb/frontend.h | 20 ++++++++++++++++----
include/linux/dvb/version.h | 2 +-
3 files changed, 20 insertions(+), 9 deletions(-)
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 31e2c0d..e30beef 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -1148,10 +1148,9 @@ static void dtv_property_adv_params_sync(struct dvb_frontend *fe)
break;
}
- if(c->delivery_system == SYS_ISDBT) {
- /* Fake out a generic DVB-T request so we pass validation in the ioctl */
- p->frequency = c->frequency;
- p->inversion = c->inversion;
+ /* Fake out a generic DVB-T request so we pass validation in the ioctl */
+ if ((c->delivery_system == SYS_ISDBT) ||
+ (c->delivery_system == SYS_DVBT2)) {
p->u.ofdm.constellation = QAM_AUTO;
p->u.ofdm.code_rate_HP = FEC_AUTO;
p->u.ofdm.code_rate_LP = FEC_AUTO;
diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h
index 493a2bf..36a3ed6 100644
--- a/include/linux/dvb/frontend.h
+++ b/include/linux/dvb/frontend.h
@@ -175,14 +175,20 @@ typedef enum fe_transmit_mode {
TRANSMISSION_MODE_2K,
TRANSMISSION_MODE_8K,
TRANSMISSION_MODE_AUTO,
- TRANSMISSION_MODE_4K
+ TRANSMISSION_MODE_4K,
+ TRANSMISSION_MODE_1K,
+ TRANSMISSION_MODE_16K,
+ TRANSMISSION_MODE_32K,
} fe_transmit_mode_t;
typedef enum fe_bandwidth {
BANDWIDTH_8_MHZ,
BANDWIDTH_7_MHZ,
BANDWIDTH_6_MHZ,
- BANDWIDTH_AUTO
+ BANDWIDTH_AUTO,
+ BANDWIDTH_5_MHZ,
+ BANDWIDTH_10_MHZ,
+ BANDWIDTH_1_712_MHZ,
} fe_bandwidth_t;
@@ -191,7 +197,10 @@ typedef enum fe_guard_interval {
GUARD_INTERVAL_1_16,
GUARD_INTERVAL_1_8,
GUARD_INTERVAL_1_4,
- GUARD_INTERVAL_AUTO
+ GUARD_INTERVAL_AUTO,
+ GUARD_INTERVAL_1_128,
+ GUARD_INTERVAL_19_128,
+ GUARD_INTERVAL_19_256,
} fe_guard_interval_t;
@@ -305,7 +314,9 @@ struct dvb_frontend_event {
#define DTV_ISDBS_TS_ID 42
-#define DTV_MAX_COMMAND DTV_ISDBS_TS_ID
+#define DTV_DVBT2_PLP_ID 43
+
+#define DTV_MAX_COMMAND DTV_DVBT2_PLP_ID
typedef enum fe_pilot {
PILOT_ON,
@@ -337,6 +348,7 @@ typedef enum fe_delivery_system {
SYS_DMBTH,
SYS_CMMB,
SYS_DAB,
+ SYS_DVBT2,
} fe_delivery_system_t;
struct dtv_cmds_h {
diff --git a/include/linux/dvb/version.h b/include/linux/dvb/version.h
index 5a7546c..1421cc8 100644
--- a/include/linux/dvb/version.h
+++ b/include/linux/dvb/version.h
@@ -24,6 +24,6 @@
#define _DVBVERSION_H_
#define DVB_API_VERSION 5
-#define DVB_API_VERSION_MINOR 2
+#define DVB_API_VERSION_MINOR 3
#endif /*_DVBVERSION_H_*/
--
1.7.1
next prev parent reply other threads:[~2011-05-08 15:51 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20110506125542.ADA1D162E7@stevekerrison.com>
2011-05-06 13:46 ` [git:v4l-dvb/for_v2.6.40] [media] Sony CXD2820R DVB-T/T2/C demodulator driver Antti Palosaari
2011-05-06 15:30 ` Mauro Carvalho Chehab
2011-05-06 15:46 ` Mauro Carvalho Chehab
2011-05-08 15:51 ` [PATCH 0/6] DVB-T2 API updates, documentation and accompanying small fixes Steve Kerrison
2011-05-08 16:04 ` Mauro Carvalho Chehab
2011-05-08 19:17 ` [PATCH v2 0/5] " Steve Kerrison
2011-05-08 19:17 ` [PATCH v2 1/5] DVB: Add basic API support for DVB-T2 and bump minor version Steve Kerrison
2011-05-08 22:22 ` Andreas Oberritter
2011-05-08 22:38 ` Andreas Oberritter
2011-05-12 21:11 ` [PATCH v3] " Steve Kerrison
2011-05-08 19:17 ` [PATCH v2 2/5] drxd: Fix warning caused by new entries in an enum Steve Kerrison
2011-05-08 22:10 ` Andreas Oberritter
2011-05-09 9:15 ` Steve Kerrison
2011-05-09 9:25 ` Mauro Carvalho Chehab
2011-05-08 19:17 ` [PATCH v2 3/5] mxl5005: " Steve Kerrison
2011-05-08 22:11 ` Andreas Oberritter
2011-05-08 19:17 ` [PATCH v2 4/5] cxd2820r: Update frontend capabilities to advertise QAM-256 Steve Kerrison
2011-05-09 21:45 ` Antti Palosaari
2011-05-08 19:17 ` [PATCH v2 5/5] Documentation: Update to include DVB-T2 additions Steve Kerrison
2011-05-12 21:18 ` Steve Kerrison
[not found] ` <1304875061.2920.13.camel@ares>
2011-05-08 22:26 ` [PATCH 0/6] DVB-T2 API updates, documentation and accompanying small fixes Andreas Oberritter
2011-05-09 3:10 ` Mauro Carvalho Chehab
2011-05-12 22:06 ` Antti Palosaari
2011-05-08 15:51 ` Steve Kerrison [this message]
2011-05-08 15:51 ` [PATCH 2/6] cxd2820r: Remove temporary T2 API hack Steve Kerrison
2011-05-08 16:06 ` Mauro Carvalho Chehab
2011-05-08 15:51 ` [PATCH 3/6] drxd: Fix warning caused by new entries in an enum Steve Kerrison
2011-05-08 15:51 ` [PATCH 4/6] mxl5005: " Steve Kerrison
2011-05-08 15:51 ` [PATCH 5/6] cxd2820r: Update frontend capabilities to advertise QAM-256 Steve Kerrison
2011-05-08 15:51 ` [PATCH 6/6] Documentation: Update to include DVB-T2 additions Steve Kerrison
2011-05-08 16:20 ` Mauro Carvalho Chehab
2011-05-08 19:13 ` Steve Kerrison
2011-05-08 22:05 ` Andreas Oberritter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1304869873-9974-2-git-send-email-steve@stevekerrison.com \
--to=steve@stevekerrison.com \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
--cc=obi@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox