From: Malcolm Priestley <tvboxspy@gmail.com>
To: 'Linux Media Mailing List' <linux-media@vger.kernel.org>
Subject: [PATCH] STV0288 frontend provide wider carrier search and DVB-S2 drop out. resend
Date: Sun, 10 Jul 2011 23:37:13 +0100 [thread overview]
Message-ID: <1310337433.2472.9.camel@localhost> (raw)
The following patch provides wider carrier search.
As with existing code search starts at MSB aligned. The boundary
is widened to start at -9. In order to save time, if no carrier is
detected at the start it advances to the next alignment until carrier
is found.
The stv0288 will detect a DVB-S2 carrier on all steps , a
time out of 11 steps is introduced to drop out of the loop.
In stv0288_set_symbol carrier and timing loops are restored to
default values (inittab) before setting the symbol rate on each tune. A
slight drift was noticed with full scan in the higher IF frequencies of
each band.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
---
drivers/media/dvb/frontends/stv0288.c | 29 +++++++++++++++++++++--------
1 files changed, 21 insertions(+), 8 deletions(-)
diff --git a/drivers/media/dvb/frontends/stv0288.c b/drivers/media/dvb/frontends/stv0288.c
index 8e0cfad..0aa3962 100644
--- a/drivers/media/dvb/frontends/stv0288.c
+++ b/drivers/media/dvb/frontends/stv0288.c
@@ -127,6 +127,11 @@ static int stv0288_set_symbolrate(struct dvb_frontend *fe, u32 srate)
if ((srate < 1000000) || (srate > 45000000))
return -EINVAL;
+ stv0288_writeregI(state, 0x22, 0);
+ stv0288_writeregI(state, 0x23, 0);
+ stv0288_writeregI(state, 0x2b, 0xff);
+ stv0288_writeregI(state, 0x2c, 0xf7);
+
temp = (unsigned int)srate / 1000;
temp = temp * 32768;
@@ -461,6 +466,7 @@ static int stv0288_set_frontend(struct dvb_frontend *fe,
char tm;
unsigned char tda[3];
+ u8 reg, time_out = 0;
dprintk("%s : FE_SET_FRONTEND\n", __func__);
@@ -488,22 +494,29 @@ static int stv0288_set_frontend(struct dvb_frontend *fe,
/* Carrier lock control register */
stv0288_writeregI(state, 0x15, 0xc5);
- tda[0] = 0x2b; /* CFRM */
tda[2] = 0x0; /* CFRL */
- for (tm = -6; tm < 7;) {
+ for (tm = -9; tm < 7;) {
/* Viterbi status */
- if (stv0288_readreg(state, 0x24) & 0x8)
- break;
-
- tda[2] += 40;
- if (tda[2] < 40)
+ reg = stv0288_readreg(state, 0x24);
+ if (reg & 0x8)
+ break;
+ if (reg & 0x80) {
+ time_out++;
+ if (time_out > 10)
+ break;
+ tda[2] += 40;
+ if (tda[2] < 40)
+ tm++;
+ } else {
tm++;
+ tda[2] = 0;
+ time_out = 0;
+ }
tda[1] = (unsigned char)tm;
stv0288_writeregI(state, 0x2b, tda[1]);
stv0288_writeregI(state, 0x2c, tda[2]);
udelay(30);
}
-
state->tuner_frequency = c->frequency;
state->fec_inner = FEC_AUTO;
state->symbol_rate = c->symbol_rate;
--
1.7.4.1
reply other threads:[~2011-07-10 22:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1310337433.2472.9.camel@localhost \
--to=tvboxspy@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).