[PATCH 2/5] staging: lirc_serial: Free resources on failure paths of lirc_serial_probe()

[Ben Hutchings <ben@decadent.org.uk>]

Failure to allocate the I/O region leaves the IRQ allocated.
A later failure leaves them both allocated.

Reported-by: Torsten Crass <torsten.crass@eBiology.de>
References: http://bugs.debian.org/645811
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/staging/media/lirc/lirc_serial.c |   19 ++++++++++++++++---
 1 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c
index 8637631..d833772 100644
--- a/drivers/staging/media/lirc/lirc_serial.c
+++ b/drivers/staging/media/lirc/lirc_serial.c
@@ -875,11 +875,14 @@ static int __devinit lirc_serial_probe(struct platform_device *dev)
 		       ": or compile the serial port driver as module and\n");
 		printk(KERN_WARNING LIRC_DRIVER_NAME
 		       ": make sure this module is loaded first\n");
-		return -EBUSY;
+		result = -EBUSY;
+		goto exit_free_irq;
 	}
 
-	if (hardware_init_port() < 0)
-		return -EINVAL;
+	if (hardware_init_port() < 0) {
+		result = -EINVAL;
+		goto exit_release_region;
+	}
 
 	/* Initialize pulse/space widths */
 	init_timing_params(duty_cycle, freq);
@@ -911,6 +914,16 @@ static int __devinit lirc_serial_probe(struct platform_device *dev)
 
 	dprintk("Interrupt %d, port %04x obtained\n", irq, io);
 	return 0;
+
+exit_release_region:
+	if (iommap != 0)
+		release_mem_region(iommap, 8 << ioshift);
+	else
+		release_region(io, 8);
+exit_free_irq:
+	free_irq(irq, (void *)&hardware);
+
+	return result;
 }
 
 static int __devexit lirc_serial_remove(struct platform_device *dev)
-- 
1.7.7.2