From: Luis Alves <ljalvs@gmail.com>
To: linux-media@vger.kernel.org
Cc: mchehab@infradead.org, crope@iki.fi, Luis Alves <ljalvs@gmail.com>
Subject: [PATCH 1/2] cx24117[v3]: Add new dvb-frontend driver (cx23885 changes)
Date: Wed, 17 Jul 2013 22:12:30 +0100 [thread overview]
Message-ID: <1374095551-3145-1-git-send-email-ljalvs@gmail.com> (raw)
v3:
Fixed issues reported by checkpatch script (thanks Antti).
Changed/fixed some stuff as sugested by Mauro Chehab.
Splited cx23885 changes to a separated patch.
Signed-off-by: Luis Alves <ljalvs@gmail.com>
---
drivers/media/pci/cx23885/Kconfig | 1 +
drivers/media/pci/cx23885/cx23885-cards.c | 68 +++++++++++++++++++++++++++++
drivers/media/pci/cx23885/cx23885-dvb.c | 31 +++++++++++++
drivers/media/pci/cx23885/cx23885-input.c | 12 +++++
drivers/media/pci/cx23885/cx23885.h | 2 +
5 files changed, 114 insertions(+)
diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig
index b3688aa..91b2ed7 100644
--- a/drivers/media/pci/cx23885/Kconfig
+++ b/drivers/media/pci/cx23885/Kconfig
@@ -23,6 +23,7 @@ config VIDEO_CX23885
select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT
select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_CX24117 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index 7e923f8..d7800ac 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -259,6 +259,16 @@ struct cx23885_board cx23885_boards[] = {
.name = "TurboSight TBS 6920",
.portb = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_TBS_6980] = {
+ .name = "TurboSight TBS 6980",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
+ [CX23885_BOARD_TBS_6981] = {
+ .name = "TurboSight TBS 6981",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
[CX23885_BOARD_TEVII_S470] = {
.name = "TeVii S470",
.portb = CX23885_MPEG_DVB,
@@ -698,6 +708,14 @@ struct cx23885_subid cx23885_subids[] = {
.subdevice = 0x8888,
.card = CX23885_BOARD_TBS_6920,
}, {
+ .subvendor = 0x6980,
+ .subdevice = 0x8888,
+ .card = CX23885_BOARD_TBS_6980,
+ }, {
+ .subvendor = 0x6981,
+ .subdevice = 0x8888,
+ .card = CX23885_BOARD_TBS_6981,
+ }, {
.subvendor = 0xd470,
.subdevice = 0x9022,
.card = CX23885_BOARD_TEVII_S470,
@@ -1022,6 +1040,36 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
dev->name, tv.model);
}
+/* some TBS cards require init */
+static void tbs_card_init(struct cx23885_dev *dev)
+{
+ int i;
+ const u8 buf[] = {
+ 0xe0, 0x06, 0x66, 0x33, 0x65,
+ 0x01, 0x17, 0x06, 0xde};
+
+ switch (dev->board) {
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
+ cx_set(GP0_IO, 0x00070007);
+ msleep(1);
+ cx_clear(GP0_IO, 2);
+ msleep(1);
+ /* send init bitstream */
+ /* the bitstream is sent in a bitbanged spi */
+ /* attached to cx23995 GPIO port */
+ for (i = 0; i < 9 * 8; i++) {
+ cx_clear(GP0_IO, 7);
+ msleep(1);
+ cx_set(GP0_IO,
+ ((buf[i >> 3] >> (7 - (i & 7))) & 1) | 4);
+ msleep(1);
+ }
+ cx_set(GP0_IO, 7);
+ break;
+ }
+}
+
int cx23885_tuner_callback(void *priv, int component, int command, int arg)
{
struct cx23885_tsport *port = priv;
@@ -1224,6 +1272,8 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
cx_set(GP0_IO, 0x00040004);
break;
case CX23885_BOARD_TBS_6920:
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
case CX23885_BOARD_PROF_8000:
cx_write(MC417_CTL, 0x00000036);
cx_write(MC417_OEN, 0x00001000);
@@ -1472,6 +1522,8 @@ int cx23885_ir_init(struct cx23885_dev *dev)
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_MYGICA_X8507:
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
if (!enable_885_ir)
break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
@@ -1515,6 +1567,8 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_MYGICA_X8507:
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
/* sd_ir is a duplicate pointer to the AV Core, just clear it */
dev->sd_ir = NULL;
@@ -1560,6 +1614,8 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_MYGICA_X8507:
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
if (dev->sd_ir)
cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
break;
@@ -1675,6 +1731,16 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
+ ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
+ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ tbs_card_init(dev);
+ break;
case CX23885_BOARD_MYGICA_X8506:
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
ts1->gen_ctrl_val = 0x5; /* Parallel */
@@ -1750,6 +1816,8 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_MYGICA_X8507:
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
case CX23885_BOARD_AVERMEDIA_HC81R:
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", 0x88 >> 1, NULL);
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
index 9c5ed10..bfb7e33 100644
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -51,6 +51,7 @@
#include "stv6110.h"
#include "lnbh24.h"
#include "cx24116.h"
+#include "cx24117.h"
#include "cimax2.h"
#include "lgs8gxx.h"
#include "netup-eeprom.h"
@@ -468,6 +469,10 @@ static struct cx24116_config tbs_cx24116_config = {
.demod_address = 0x55,
};
+static struct cx24117_config tbs_cx24117_config = {
+ .demod_address = 0x55,
+};
+
static struct ds3000_config tevii_ds3000_config = {
.demod_address = 0x68,
};
@@ -1027,6 +1032,32 @@ static int dvb_register(struct cx23885_tsport *port)
fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
break;
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
+ i2c_bus = &dev->i2c_bus[1];
+
+ switch (port->nr) {
+ /* PORT B */
+ case 1:
+ fe0->dvb.frontend = dvb_attach(cx24117_attach,
+ &tbs_cx24117_config,
+ &i2c_bus->i2c_adap, NULL);
+ break;
+ /* PORT C */
+ case 2:
+ /* use fe1 pointer as temporary holder */
+ /* for the first frontend */
+ fe1 = videobuf_dvb_get_frontend(
+ &port->dev->ts1.frontends, 1);
+
+ fe0->dvb.frontend = dvb_attach(cx24117_attach,
+ &tbs_cx24117_config,
+ &i2c_bus->i2c_adap, fe1->dvb.frontend);
+ /* we're done, so clear fe1 pointer */
+ fe1 = NULL;
+ break;
+ }
+ break;
case CX23885_BOARD_TEVII_S470:
i2c_bus = &dev->i2c_bus[1];
diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c
index 7875dfb..8a49e7c 100644
--- a/drivers/media/pci/cx23885/cx23885-input.c
+++ b/drivers/media/pci/cx23885/cx23885-input.c
@@ -90,6 +90,8 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_MYGICA_X8507:
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
/*
* The only boards we handle right now. However other boards
* using the CX2388x integrated IR controller should be similar
@@ -168,6 +170,8 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
break;
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
/*
* The IR controller on this board only returns pulse widths.
* Any other mode setting will fail to set up the device.
@@ -298,6 +302,14 @@ int cx23885_input_init(struct cx23885_dev *dev)
/* A guess at the remote */
rc_map = RC_MAP_TOTAL_MEDIA_IN_HAND_02;
break;
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
+ /* Integrated CX23885 IR controller */
+ driver_type = RC_DRIVER_IR_RAW;
+ allowed_protos = RC_BIT_ALL;
+ /* A guess at the remote */
+ rc_map = RC_MAP_TBS_NEC;
+ break;
default:
return -ENODEV;
}
diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
index 5687d3f..ebcc63e 100644
--- a/drivers/media/pci/cx23885/cx23885.h
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -93,6 +93,8 @@
#define CX23885_BOARD_PROF_8000 37
#define CX23885_BOARD_HAUPPAUGE_HVR4400 38
#define CX23885_BOARD_AVERMEDIA_HC81R 39
+#define CX23885_BOARD_TBS_6981 40
+#define CX23885_BOARD_TBS_6980 41
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
--
1.7.9.5
next reply other threads:[~2013-07-17 21:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-17 21:12 Luis Alves [this message]
2013-07-17 21:12 ` [PATCH 2/2] cx24117[v3]: Add new dvb-frontend driver (tested cards: TBS6980 and TBS6981 Dual tuner DVB-S/S2) Luis Alves
2013-07-22 21:02 ` Antti Palosaari
2013-07-22 20:42 ` [PATCH 1/2] cx24117[v3]: Add new dvb-frontend driver (cx23885 changes) Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374095551-3145-1-git-send-email-ljalvs@gmail.com \
--to=ljalvs@gmail.com \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).