Fwd: Re: Re: Hauppauge 930C

Fwd: Re: Re: Hauppauge 930C

[Thomas Senyk]

It all started at:
http://www.spinics.net/lists/linux-media/msg45882.html

=> info@hauppauge.de  => steven.toth@me.com => linux-media@vger.kernel.org

I think I have to give up and accept "not any time soon" :)

Greets
Thomas


----------  Forwarded Message  ----------

Subject: Re: Re: Hauppauge 930C
Date: Thursday, April 26, 2012, 09:59:57 AM
From: ext Steven Toth <steven.toth@me.com>
To: Thomas Senyk <thomas.senyk@nokia.com>

Hello Thomas,

Thanks for writing!

I'm a little busy with some other projects.

Please direct your questions to the linux-media mailing list, they
most likely can help.

- Steve

On Thu, Apr 26, 2012 at 9:57 AM, Thomas Senyk <thomas.senyk@nokia.com> wrote:
> Hi,
>
> as recommended by G. Mallé, I'm hereby contacting you.
>
> I want to get the newest 930C running on my linux-media-center setup.
> See my initial email.
>
>
> Greets
> Thomas
>
>
> ----------  Forwarded Message  ----------
>
> Subject: Re: Hauppauge 930C
> Date: Thursday, April 26, 2012, 03:08:44 PM
> From: ext info@hauppauge.de <info@hauppauge.de>
> To: Thomas Senyk <thomas.senyk@nokia.com>
>
> Dear Thomas Senyk,
>
> maybe you should contact www.steventoth.net, Steven works for Hauppauge and
> is spezialized in Linux.
>
> mit freundlichem Gruß, met vriendelijke groet, bien cordialement, kind
> regards,
>
> G. Mallé
>
> Senden Sie bitte immer den kompletten Email-Verkehr!
>
> EMail: info@hauppauge.de
> Mitarbeiter Technical Support BeNeLux
> Website: www.hauppauge.tv
> FAQ: www.hauppauge.de/pages/support_faq.html
> www.facebook.com/hauppauge.de
>
> Hauppauge Computer Works GmbH
> Krefelder Straße 669
> D-41066 Mönchengladbach
> Germany
>
> tel:       +49-2161-6948840
> fax:       +49-2161-6948815
>
> Geschäftsführer: Ken Plotkin, Sascha Winkels
> Amtsgericht Mönchengladbach HRB 4179
> ----- Original Message -----
> From: "Thomas Senyk" <thomas.senyk@nokia.com>
> To: <info@hauppauge.de>
> Sent: Thursday, April 26, 2012 1:32 PM
> Subject: Hauppauge 930C
>
>
>> Hallo Hauppauge-Team,
>>
>> I'm currently trying to setup a linux based media-center for work.
>> To show our technology (Qt) on shows on a demo device.
>>
>> I know there is no official linux support.
>> That's not required and I know my way around linux well enough.
>>
>> I need a dual-tunner (dvb-t and -c) and because the (unofficial/community)
>> linux-support of Hauppauge devices is normally very good, the 930C looked
>> like
>> the perfect choose.
>>
>> The 930C should work perfectly ... until a new HW revision.
>> The working product id was 1605, the one I got is b130.
>>
>> It seams there is no kernel support for this device at the moment.
>>
>> Do you have any inside into that? Any comment? ongoing work?
>>
>> I wouldn't mind changing my b130 with a "old" 1605, but I got no idea
>> where.
>>
>>
>> Greets
>> Thomas
>>
>
> -----------------------------------------
-----------------------------------------