From: Roland Scheidegger <rscheidegger_lists@hispeed.ch>
To: linux-media@vger.kernel.org
Cc: Roland Scheidegger <rscheidegger_lists@hispeed.ch>
Subject: [PATCH] [media] az6007: support Technisat Cablestar Combo HDCI (minus remote)
Date: Sat, 2 Nov 2013 20:49:32 +0100 [thread overview]
Message-ID: <1383421772-28243-1-git-send-email-rscheidegger_lists@hispeed.ch> (raw)
This is similar to the Terratec H7. It works with the same az6007 firmware as
the former, however the drx-k firmware of the H7 will NOT work. Hence use
a different firmware name. The firmware does not need to exist as the one in
the eeprom is just fine as long as the h7 one doesn't get loaded, but maybe
some day someone wants to load it (the one from the h5 would work too).
Also since the config entry is now different anyway disable support for rc.
AFAIK the Technisat remote (TS35) is RC5 and the code (which a code comment
claims doesn't work anyway) only would handle NEC hence it's pointless creating
a device and polling it if we already know it can't work.
CI is untested.
Originally based on idea found on
http://www.linuxtv.org/wiki/index.php/TechniSat_CableStar_Combo_HD_CI claiming
only id needs to be added (but failed to mention it only worked because the
driver couldn't find the h7 drx-k firmware...).
Signed-off-by: Roland Scheidegger <rscheidegger_lists@hispeed.ch>
---
drivers/media/dvb-core/dvb-usb-ids.h | 1 +
drivers/media/usb/dvb-usb-v2/az6007.c | 59 +++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
diff --git a/drivers/media/dvb-core/dvb-usb-ids.h b/drivers/media/dvb-core/dvb-usb-ids.h
index 419a2d6..4a53454 100644
--- a/drivers/media/dvb-core/dvb-usb-ids.h
+++ b/drivers/media/dvb-core/dvb-usb-ids.h
@@ -365,6 +365,7 @@
#define USB_PID_TERRATEC_DVBS2CI_V2 0x10ac
#define USB_PID_TECHNISAT_USB2_HDCI_V1 0x0001
#define USB_PID_TECHNISAT_USB2_HDCI_V2 0x0002
+#define USB_PID_TECHNISAT_USB2_CABLESTAR_HDCI 0x0003
#define USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2 0x0004
#define USB_PID_TECHNISAT_USB2_DVB_S2 0x0500
#define USB_PID_CPYTO_REDI_PC50A 0xa803
diff --git a/drivers/media/usb/dvb-usb-v2/az6007.c b/drivers/media/usb/dvb-usb-v2/az6007.c
index 44c64ef3..c1051c3 100644
--- a/drivers/media/usb/dvb-usb-v2/az6007.c
+++ b/drivers/media/usb/dvb-usb-v2/az6007.c
@@ -68,6 +68,19 @@ static struct drxk_config terratec_h7_drxk = {
.microcode_name = "dvb-usb-terratec-h7-drxk.fw",
};
+static struct drxk_config cablestar_hdci_drxk = {
+ .adr = 0x29,
+ .parallel_ts = true,
+ .dynamic_clk = true,
+ .single_master = true,
+ .enable_merr_cfg = true,
+ .no_i2c_bridge = false,
+ .chunk_size = 64,
+ .mpeg_out_clk_strength = 0x02,
+ .qam_demod_parameter_count = 2,
+ .microcode_name = "dvb-usb-technisat-cablestar-hdci-drxk.fw",
+};
+
static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
{
struct az6007_device_state *st = fe_to_priv(fe);
@@ -630,6 +643,27 @@ static int az6007_frontend_attach(struct dvb_usb_adapter *adap)
return 0;
}
+static int az6007_cablestar_hdci_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct az6007_device_state *st = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+
+ pr_debug("attaching demod drxk\n");
+
+ adap->fe[0] = dvb_attach(drxk_attach, &cablestar_hdci_drxk,
+ &d->i2c_adap);
+ if (!adap->fe[0])
+ return -EINVAL;
+
+ adap->fe[0]->sec_priv = adap;
+ st->gate_ctrl = adap->fe[0]->ops.i2c_gate_ctrl;
+ adap->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl;
+
+ az6007_ci_init(adap);
+
+ return 0;
+}
+
static int az6007_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dvb_usb_device *d = adap_to_d(adap);
@@ -868,6 +902,29 @@ static struct dvb_usb_device_properties az6007_props = {
}
};
+static struct dvb_usb_device_properties az6007_cablestar_hdci_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .firmware = AZ6007_FIRMWARE,
+
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct az6007_device_state),
+ .i2c_algo = &az6007_i2c_algo,
+ .tuner_attach = az6007_tuner_attach,
+ .frontend_attach = az6007_cablestar_hdci_frontend_attach,
+ .streaming_ctrl = az6007_streaming_ctrl,
+/* ditch get_rc_config as it can't work (TS35 remote, I believe it's rc5) */
+ .get_rc_config = NULL,
+ .read_mac_address = az6007_read_mac_addr,
+ .download_firmware = az6007_download_firmware,
+ .identify_state = az6007_identify_state,
+ .power_ctrl = az6007_power_ctrl,
+ .num_adapters = 1,
+ .adapter = {
+ { .stream = DVB_USB_STREAM_BULK(0x02, 10, 4096), }
+ }
+};
+
static struct usb_device_id az6007_usb_table[] = {
{DVB_USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_6007,
&az6007_props, "Azurewave 6007", RC_MAP_EMPTY)},
@@ -875,6 +932,8 @@ static struct usb_device_id az6007_usb_table[] = {
&az6007_props, "Terratec H7", RC_MAP_NEC_TERRATEC_CINERGY_XS)},
{DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7_2,
&az6007_props, "Terratec H7", RC_MAP_NEC_TERRATEC_CINERGY_XS)},
+ {DVB_USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_CABLESTAR_HDCI,
+ &az6007_cablestar_hdci_props, "Technisat CableStar Combo HD CI", RC_MAP_EMPTY)},
{0},
};
--
1.8.1.4
next reply other threads:[~2013-11-02 19:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-02 19:49 Roland Scheidegger [this message]
2013-11-05 6:14 ` [PATCH] [media] az6007: support Technisat Cablestar Combo HDCI (minus remote) Janusz S. Bien
2013-11-05 12:05 ` Janusz S. Bien
2013-11-27 23:08 ` Roland Scheidegger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383421772-28243-1-git-send-email-rscheidegger_lists@hispeed.ch \
--to=rscheidegger_lists@hispeed.ch \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).