[PATCH] em28xx: fix I2S audio sample rate definitions and info output

["Frank Schäfer" <fschaefer.oss@googlemail.com>]

The audio configuration in chip config register 0x00 and eeprom are always
consistent. But currently the audio configuration #defines for the chip config
register say 0x20 means 3 sample rates and 0x30 5 sample rates, while the eeprom
info output says 0x20 means 1 sample rate and 0x30 3 sample rates.

I've checked the datasheet excerpts I have and it seems that the meaning of
these bits is different for em2820/40 (1 and 3 sample rates) and em2860+
(3 and 5 smaple rates).
I have also checked my Hauppauge WinTV USB 2 (em2840) and the chip/eeprom
audio config 0x20 matches the sample rates reproted by the USB device
descriptor (32k only).

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
---
 drivers/media/usb/em28xx/em28xx-core.c |   24 +++++++++++++-----------
 drivers/media/usb/em28xx/em28xx-i2c.c  |   10 ++++++++--
 drivers/media/usb/em28xx/em28xx-reg.h  |   10 ++++++----
 drivers/media/usb/em28xx/em28xx.h      |    3 +--
 4 Dateien geändert, 28 Zeilen hinzugefügt(+), 19 Zeilen entfernt(-)

diff --git a/drivers/media/usb/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c
index f6076a5..192b657 100644
--- a/drivers/media/usb/em28xx/em28xx-core.c
+++ b/drivers/media/usb/em28xx/em28xx-core.c
@@ -525,17 +525,19 @@ int em28xx_audio_setup(struct em28xx *dev)
 		dev->has_alsa_audio = false;
 		dev->audio_mode.has_audio = false;
 		return 0;
-	} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
-		   EM28XX_CHIPCFG_I2S_3_SAMPRATES) {
-		em28xx_info("I2S Audio (3 sample rates)\n");
-		dev->audio_mode.i2s_3rates = 1;
-	} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
-		   EM28XX_CHIPCFG_I2S_5_SAMPRATES) {
-		em28xx_info("I2S Audio (5 sample rates)\n");
-		dev->audio_mode.i2s_5rates = 1;
-	}
-
-	if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) != EM28XX_CHIPCFG_AC97) {
+	} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) != EM28XX_CHIPCFG_AC97) {
+		if (dev->chip_id < CHIP_ID_EM2860 &&
+	            (cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
+		    EM2820_CHIPCFG_I2S_1_SAMPRATE)
+			dev->audio_mode.i2s_samplerates = 1;
+		else if (dev->chip_id >= CHIP_ID_EM2860 &&
+			 (cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
+			 EM2860_CHIPCFG_I2S_5_SAMPRATES)
+			dev->audio_mode.i2s_samplerates = 5;
+		else
+			dev->audio_mode.i2s_samplerates = 3;
+		em28xx_info("I2S Audio (%d sample rate(s))\n",
+					       dev->audio_mode.i2s_samplerates);
 		/* Skip the code that does AC97 vendor detection */
 		dev->audio_mode.ac97 = EM28XX_NO_AC97;
 		goto init_audio;
diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c
index c4ff973..f2d5f8a 100644
--- a/drivers/media/usb/em28xx/em28xx-i2c.c
+++ b/drivers/media/usb/em28xx/em28xx-i2c.c
@@ -736,10 +736,16 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
 		em28xx_info("\tAC97 audio (5 sample rates)\n");
 		break;
 	case 2:
-		em28xx_info("\tI2S audio, sample rate=32k\n");
+		if (dev->chip_id < CHIP_ID_EM2860)
+			em28xx_info("\tI2S audio, sample rate=32k\n");
+		else
+			em28xx_info("\tI2S audio, 3 sample rates\n");
 		break;
 	case 3:
-		em28xx_info("\tI2S audio, 3 sample rates\n");
+		if (dev->chip_id < CHIP_ID_EM2860)
+			em28xx_info("\tI2S audio, 3 sample rates\n");
+		else
+			em28xx_info("\tI2S audio, 5 sample rates\n");
 		break;
 	}
 
diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h
index b769ceb..311fb34 100644
--- a/drivers/media/usb/em28xx/em28xx-reg.h
+++ b/drivers/media/usb/em28xx/em28xx-reg.h
@@ -25,10 +25,12 @@
 #define EM28XX_R00_CHIPCFG	0x00
 
 /* em28xx Chip Configuration 0x00 */
-#define EM28XX_CHIPCFG_VENDOR_AUDIO		0x80
-#define EM28XX_CHIPCFG_I2S_VOLUME_CAPABLE	0x40
-#define EM28XX_CHIPCFG_I2S_5_SAMPRATES		0x30
-#define EM28XX_CHIPCFG_I2S_3_SAMPRATES		0x20
+#define EM2860_CHIPCFG_VENDOR_AUDIO		0x80
+#define EM2860_CHIPCFG_I2S_VOLUME_CAPABLE	0x40
+#define EM2820_CHIPCFG_I2S_3_SAMPRATES		0x30
+#define EM2860_CHIPCFG_I2S_5_SAMPRATES		0x30
+#define EM2820_CHIPCFG_I2S_1_SAMPRATE		0x20
+#define EM2860_CHIPCFG_I2S_3_SAMPRATES		0x20
 #define EM28XX_CHIPCFG_AC97			0x10
 #define EM28XX_CHIPCFG_AUDIOMASK		0x30
 
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index 191ef35..4d8c7d2 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -292,8 +292,7 @@ struct em28xx_audio_mode {
 
 	unsigned int has_audio:1;
 
-	unsigned int i2s_3rates:1;
-	unsigned int i2s_5rates:1;
+	u8 i2s_samplerates;
 };
 
 /* em28xx has two audio inputs: tuner and line in.
-- 
1.7.10.4