From: "Frank Schäfer" <fschaefer.oss@googlemail.com>
To: m.chehab@samsung.com
Cc: linux-media@vger.kernel.org,
"Frank Schäfer" <fschaefer.oss@googlemail.com>
Subject: [PATCH 17/19] em28xx: remove field tda9887_conf from struct em28xx
Date: Mon, 24 Mar 2014 20:33:23 +0100 [thread overview]
Message-ID: <1395689605-2705-18-git-send-email-fschaefer.oss@googlemail.com> (raw)
In-Reply-To: <1395689605-2705-1-git-send-email-fschaefer.oss@googlemail.com>
The tda9887 configuration is already stored in the board data, and it is used
only one time by the v4l2 sub-module at tuner setup.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
---
drivers/media/usb/em28xx/em28xx-cards.c | 3 ---
drivers/media/usb/em28xx/em28xx-video.c | 6 +++---
drivers/media/usb/em28xx/em28xx.h | 1 -
3 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 64ea25a..b81946f 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -2719,9 +2719,6 @@ static void em28xx_card_setup(struct em28xx *dev)
if (em28xx_boards[dev->model].tuner_addr)
dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
- if (em28xx_boards[dev->model].tda9887_conf)
- dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
-
/* request some modules */
switch (dev->model) {
case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c
index 35bf2b9..8c0082c 100644
--- a/drivers/media/usb/em28xx/em28xx-video.c
+++ b/drivers/media/usb/em28xx/em28xx-video.c
@@ -2254,11 +2254,11 @@ static void em28xx_tuner_setup(struct em28xx *dev)
0, tuner, s_type_addr, &tun_setup);
}
- if (dev->tda9887_conf) {
+ if (dev->board.tda9887_conf) {
struct v4l2_priv_tun_config tda9887_cfg;
tda9887_cfg.tuner = TUNER_TDA9887;
- tda9887_cfg.priv = &dev->tda9887_conf;
+ tda9887_cfg.priv = &dev->board.tda9887_conf;
v4l2_device_call_all(v4l2_dev,
0, tuner, s_config, &tda9887_cfg);
@@ -2364,7 +2364,7 @@ static int em28xx_v4l2_init(struct em28xx *dev)
/* Initialize tuner and camera */
if (dev->board.tuner_type != TUNER_ABSENT) {
- int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
+ int has_demod = (dev->board.tda9887_conf & TDA9887_PRESENT);
if (dev->board.radio.type)
v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index 8a0ed93..917cb25 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -633,7 +633,6 @@ struct em28xx {
int tuner_type; /* type of the tuner */
int tuner_addr; /* tuner address */
- int tda9887_conf;
/* i2c i/o */
struct i2c_adapter i2c_adap[NUM_I2C_BUSES];
--
1.8.4.5
next prev parent reply other threads:[~2014-03-24 19:33 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-24 19:33 [PATCH 00/19] em28xx: clean up the main device struct and move sub-module specific data to its own data structs Frank Schäfer
2014-03-24 19:33 ` [PATCH 01/19] em28xx: move sub-module data structs to a common place in the main struct Frank Schäfer
2014-03-24 19:33 ` [PATCH 02/19] em28xx-video: simplify usage of the pointer to struct v4l2_ctrl_handler in em28xx_v4l2_init() Frank Schäfer
2014-03-24 19:33 ` [PATCH 03/19] em28xx: start moving em28xx-v4l specific data to its own struct Frank Schäfer
2014-05-09 9:17 ` Hans Verkuil
2014-05-11 20:46 ` Frank Schäfer
2014-05-12 8:20 ` Hans Verkuil
2014-03-24 19:33 ` [PATCH 04/19] em28xx: move struct v4l2_ctrl_handler ctrl_handler from struct em28xx to struct v4l2 Frank Schäfer
2014-03-24 19:33 ` [PATCH 05/19] em28xx: move struct v4l2_clk *clk " Frank Schäfer
2014-03-24 19:33 ` [PATCH 06/19] em28xx: move video_device structs " Frank Schäfer
2014-05-09 9:19 ` Hans Verkuil
2014-05-11 20:50 ` Frank Schäfer
2014-05-12 8:09 ` Hans Verkuil
2014-03-24 19:33 ` [PATCH 07/19] em28xx: move videobuf2 related data " Frank Schäfer
2014-03-24 19:33 ` [PATCH 08/19] em28xx: move v4l2 frame resolutions and scale " Frank Schäfer
2014-03-24 19:33 ` [PATCH 09/19] em28xx: move vinmode and vinctrl " Frank Schäfer
2014-03-24 19:33 ` [PATCH 10/19] em28xx: move TV norm " Frank Schäfer
2014-03-24 19:33 ` [PATCH 11/19] em28xx: move struct em28xx_fmt *format " Frank Schäfer
2014-03-24 19:33 ` [PATCH 12/19] em28xx: move progressive/interlaced fields " Frank Schäfer
2014-03-24 19:33 ` [PATCH 13/19] em28xx: move sensor parameter " Frank Schäfer
2014-03-24 19:33 ` [PATCH 14/19] em28xx: move capture state tracking " Frank Schäfer
2014-03-24 19:33 ` [PATCH 15/19] em28xx: move v4l2 user counting " Frank Schäfer
2014-03-24 19:33 ` [PATCH 16/19] em28xx: move tuner frequency field " Frank Schäfer
2014-03-24 19:33 ` Frank Schäfer [this message]
2014-03-24 19:33 ` [PATCH 18/19] em28xx: remove field tuner_addr from struct em28xx Frank Schäfer
2014-03-24 19:33 ` [PATCH 19/19] em28xx: move fields wq_trigger and streaming_started from struct em28xx to struct em28xx_audio Frank Schäfer
2014-05-09 9:04 ` [PATCH 00/19] em28xx: clean up the main device struct and move sub-module specific data to its own data structs Hans Verkuil
2014-05-11 21:01 ` Frank Schäfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395689605-2705-18-git-send-email-fschaefer.oss@googlemail.com \
--to=fschaefer.oss@googlemail.com \
--cc=linux-media@vger.kernel.org \
--cc=m.chehab@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox