From: "Frank Schäfer" <fschaefer.oss@googlemail.com>
To: m.chehab@samsung.com
Cc: linux-media@vger.kernel.org,
"Frank Schäfer" <fschaefer.oss@googlemail.com>
Subject: [PATCH 19/19] em28xx: move fields wq_trigger and streaming_started from struct em28xx to struct em28xx_audio
Date: Mon, 24 Mar 2014 20:33:25 +0100 [thread overview]
Message-ID: <1395689605-2705-20-git-send-email-fschaefer.oss@googlemail.com> (raw)
In-Reply-To: <1395689605-2705-1-git-send-email-fschaefer.oss@googlemail.com>
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
---
drivers/media/usb/em28xx/em28xx-audio.c | 39 ++++++++++++++++++---------------
drivers/media/usb/em28xx/em28xx.h | 8 +++----
2 files changed, 25 insertions(+), 22 deletions(-)
diff --git a/drivers/media/usb/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c
index c1937ea..e5ed5b9 100644
--- a/drivers/media/usb/em28xx/em28xx-audio.c
+++ b/drivers/media/usb/em28xx/em28xx-audio.c
@@ -92,7 +92,7 @@ static void em28xx_audio_isocirq(struct urb *urb)
if (dev->disconnected) {
dprintk("device disconnected while streaming. URB status=%d.\n", urb->status);
- atomic_set(&dev->stream_started, 0);
+ atomic_set(&dev->adev.stream_started, 0);
return;
}
@@ -109,7 +109,7 @@ static void em28xx_audio_isocirq(struct urb *urb)
break;
}
- if (atomic_read(&dev->stream_started) == 0)
+ if (atomic_read(&dev->adev.stream_started) == 0)
return;
if (dev->adev.capture_pcm_substream) {
@@ -185,7 +185,7 @@ static int em28xx_init_audio_isoc(struct em28xx *dev)
em28xx_errdev("submit of audio urb failed (error=%i)\n",
errCode);
em28xx_deinit_isoc_audio(dev);
- atomic_set(&dev->stream_started, 0);
+ atomic_set(&dev->adev.stream_started, 0);
return errCode;
}
@@ -332,9 +332,9 @@ static int snd_em28xx_pcm_close(struct snd_pcm_substream *substream)
dev->mute = 1;
mutex_lock(&dev->lock);
dev->adev.users--;
- if (atomic_read(&dev->stream_started) > 0) {
- atomic_set(&dev->stream_started, 0);
- schedule_work(&dev->wq_trigger);
+ if (atomic_read(&dev->adev.stream_started) > 0) {
+ atomic_set(&dev->adev.stream_started, 0);
+ schedule_work(&dev->adev.wq_trigger);
}
em28xx_audio_analog_set(dev);
@@ -381,12 +381,13 @@ static int snd_em28xx_hw_capture_params(struct snd_pcm_substream *substream,
static int snd_em28xx_hw_capture_free(struct snd_pcm_substream *substream)
{
struct em28xx *dev = snd_pcm_substream_chip(substream);
+ struct em28xx_audio *adev = &dev->adev;
dprintk("Stop capture, if needed\n");
- if (atomic_read(&dev->stream_started) > 0) {
- atomic_set(&dev->stream_started, 0);
- schedule_work(&dev->wq_trigger);
+ if (atomic_read(&adev->stream_started) > 0) {
+ atomic_set(&adev->stream_started, 0);
+ schedule_work(&adev->wq_trigger);
}
return 0;
@@ -407,9 +408,11 @@ static int snd_em28xx_prepare(struct snd_pcm_substream *substream)
static void audio_trigger(struct work_struct *work)
{
- struct em28xx *dev = container_of(work, struct em28xx, wq_trigger);
+ struct em28xx_audio *adev =
+ container_of(work, struct em28xx_audio, wq_trigger);
+ struct em28xx *dev = container_of(adev, struct em28xx, adev);
- if (atomic_read(&dev->stream_started)) {
+ if (atomic_read(&adev->stream_started)) {
dprintk("starting capture");
em28xx_init_audio_isoc(dev);
} else {
@@ -431,17 +434,17 @@ static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream,
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: /* fall through */
case SNDRV_PCM_TRIGGER_RESUME: /* fall through */
case SNDRV_PCM_TRIGGER_START:
- atomic_set(&dev->stream_started, 1);
+ atomic_set(&dev->adev.stream_started, 1);
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH: /* fall through */
case SNDRV_PCM_TRIGGER_SUSPEND: /* fall through */
case SNDRV_PCM_TRIGGER_STOP:
- atomic_set(&dev->stream_started, 0);
+ atomic_set(&dev->adev.stream_started, 0);
break;
default:
retval = -EINVAL;
}
- schedule_work(&dev->wq_trigger);
+ schedule_work(&dev->adev.wq_trigger);
return retval;
}
@@ -929,7 +932,7 @@ static int em28xx_audio_init(struct em28xx *dev)
strcpy(card->shortname, "Em28xx Audio");
strcpy(card->longname, "Empia Em28xx Audio");
- INIT_WORK(&dev->wq_trigger, audio_trigger);
+ INIT_WORK(&adev->wq_trigger, audio_trigger);
if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
em28xx_cvol_new(card, dev, "Video", AC97_VIDEO);
@@ -984,7 +987,7 @@ static int em28xx_audio_fini(struct em28xx *dev)
if (dev->adev.sndcard) {
snd_card_disconnect(dev->adev.sndcard);
- flush_work(&dev->wq_trigger);
+ flush_work(&dev->adev.wq_trigger);
em28xx_audio_free_urb(dev);
@@ -1006,7 +1009,7 @@ static int em28xx_audio_suspend(struct em28xx *dev)
em28xx_info("Suspending audio extension");
em28xx_deinit_isoc_audio(dev);
- atomic_set(&dev->stream_started, 0);
+ atomic_set(&dev->adev.stream_started, 0);
return 0;
}
@@ -1020,7 +1023,7 @@ static int em28xx_audio_resume(struct em28xx *dev)
em28xx_info("Resuming audio extension");
/* Nothing to do other than schedule_work() ?? */
- schedule_work(&dev->wq_trigger);
+ schedule_work(&dev->adev.wq_trigger);
return 0;
}
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index 3a3fe16..c1102ba 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -567,6 +567,10 @@ struct em28xx_audio {
int users;
spinlock_t slock;
+
+ /* Controls streaming */
+ struct work_struct wq_trigger; /* trigger to start/stop audio */
+ atomic_t stream_started; /* stream should be running if true */
};
struct em28xx;
@@ -618,10 +622,6 @@ struct em28xx {
enum em28xx_sensor em28xx_sensor; /* camera specific */
- /* Controls audio streaming */
- struct work_struct wq_trigger; /* Trigger to start/stop audio for alsa module */
- atomic_t stream_started; /* stream should be running if true */
-
/* Some older em28xx chips needs a waiting time after writing */
unsigned int wait_after_write;
--
1.8.4.5
next prev parent reply other threads:[~2014-03-24 19:33 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-24 19:33 [PATCH 00/19] em28xx: clean up the main device struct and move sub-module specific data to its own data structs Frank Schäfer
2014-03-24 19:33 ` [PATCH 01/19] em28xx: move sub-module data structs to a common place in the main struct Frank Schäfer
2014-03-24 19:33 ` [PATCH 02/19] em28xx-video: simplify usage of the pointer to struct v4l2_ctrl_handler in em28xx_v4l2_init() Frank Schäfer
2014-03-24 19:33 ` [PATCH 03/19] em28xx: start moving em28xx-v4l specific data to its own struct Frank Schäfer
2014-05-09 9:17 ` Hans Verkuil
2014-05-11 20:46 ` Frank Schäfer
2014-05-12 8:20 ` Hans Verkuil
2014-03-24 19:33 ` [PATCH 04/19] em28xx: move struct v4l2_ctrl_handler ctrl_handler from struct em28xx to struct v4l2 Frank Schäfer
2014-03-24 19:33 ` [PATCH 05/19] em28xx: move struct v4l2_clk *clk " Frank Schäfer
2014-03-24 19:33 ` [PATCH 06/19] em28xx: move video_device structs " Frank Schäfer
2014-05-09 9:19 ` Hans Verkuil
2014-05-11 20:50 ` Frank Schäfer
2014-05-12 8:09 ` Hans Verkuil
2014-03-24 19:33 ` [PATCH 07/19] em28xx: move videobuf2 related data " Frank Schäfer
2014-03-24 19:33 ` [PATCH 08/19] em28xx: move v4l2 frame resolutions and scale " Frank Schäfer
2014-03-24 19:33 ` [PATCH 09/19] em28xx: move vinmode and vinctrl " Frank Schäfer
2014-03-24 19:33 ` [PATCH 10/19] em28xx: move TV norm " Frank Schäfer
2014-03-24 19:33 ` [PATCH 11/19] em28xx: move struct em28xx_fmt *format " Frank Schäfer
2014-03-24 19:33 ` [PATCH 12/19] em28xx: move progressive/interlaced fields " Frank Schäfer
2014-03-24 19:33 ` [PATCH 13/19] em28xx: move sensor parameter " Frank Schäfer
2014-03-24 19:33 ` [PATCH 14/19] em28xx: move capture state tracking " Frank Schäfer
2014-03-24 19:33 ` [PATCH 15/19] em28xx: move v4l2 user counting " Frank Schäfer
2014-03-24 19:33 ` [PATCH 16/19] em28xx: move tuner frequency field " Frank Schäfer
2014-03-24 19:33 ` [PATCH 17/19] em28xx: remove field tda9887_conf from struct em28xx Frank Schäfer
2014-03-24 19:33 ` [PATCH 18/19] em28xx: remove field tuner_addr " Frank Schäfer
2014-03-24 19:33 ` Frank Schäfer [this message]
2014-05-09 9:04 ` [PATCH 00/19] em28xx: clean up the main device struct and move sub-module specific data to its own data structs Hans Verkuil
2014-05-11 21:01 ` Frank Schäfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395689605-2705-20-git-send-email-fschaefer.oss@googlemail.com \
--to=fschaefer.oss@googlemail.com \
--cc=linux-media@vger.kernel.org \
--cc=m.chehab@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox