public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Cc: linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH 2/4] rcar-vin: cache the CSI-2 channel selection value
Date: Fri, 14 Dec 2018 10:23:25 +0200	[thread overview]
Message-ID: <14327612.kiatMVmQX0@avalon> (raw)
In-Reply-To: <20181214061824.10296-3-niklas.soderlund+renesas@ragnatech.se>

Hi Niklas,

Thank you for the patch.

On Friday, 14 December 2018 08:18:22 EET Niklas Söderlund wrote:
> In preparation of suspend/resume support cache the chsel value when we
> write it to the register so it can be restored on resume if needed.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
>  drivers/media/platform/rcar-vin/rcar-dma.c | 2 ++
>  drivers/media/platform/rcar-vin/rcar-vin.h | 2 ++
>  2 files changed, 4 insertions(+)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c
> b/drivers/media/platform/rcar-vin/rcar-dma.c index
> beb9248992a48a74..64f7636f94d6a0a3 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -1336,6 +1336,8 @@ int rvin_set_channel_routing(struct rvin_dev *vin, u8
> chsel)
> 
>  	vin_dbg(vin, "Set IFMD 0x%x\n", ifmd);
> 
> +	vin->chsel = chsel;
> +

Would it be useful to add a

	if (vin->chsel == chsel)
		return 0;

at the beginning of the function, or is that impossible ?

>  	/* Restore VNMC. */
>  	rvin_write(vin, vnmc, VNMC_REG);
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h
> b/drivers/media/platform/rcar-vin/rcar-vin.h index
> 0b13b34d03e3dce4..d21fc991b7a9da36 100644
> --- a/drivers/media/platform/rcar-vin/rcar-vin.h
> +++ b/drivers/media/platform/rcar-vin/rcar-vin.h
> @@ -170,6 +170,7 @@ struct rvin_info {
>   * @state:		keeps track of operation state
>   *
>   * @is_csi:		flag to mark the VIN as using a CSI-2 subdevice
> + * @chsel		Cached value of the current CSI-2 channel selection

Nitpicking, the documentation for other fields don't start with a capital 
letter.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

>   *
>   * @mbus_code:		media bus format code
>   * @format:		active V4L2 pixel format
> @@ -207,6 +208,7 @@ struct rvin_dev {
>  	enum rvin_dma_state state;
> 
>  	bool is_csi;
> +	unsigned int chsel;
> 
>  	u32 mbus_code;
>  	struct v4l2_pix_format format;

-- 
Regards,

Laurent Pinchart




  reply	other threads:[~2018-12-14  8:22 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-14  6:18 [PATCH 0/4] rcar-vin: add support for suspend and resume Niklas Söderlund
2018-12-14  6:18 ` [PATCH 1/4] rcar-vin: fix wrong return value in rvin_set_channel_routing() Niklas Söderlund
2018-12-14  8:19   ` Laurent Pinchart
2018-12-14  6:18 ` [PATCH 2/4] rcar-vin: cache the CSI-2 channel selection value Niklas Söderlund
2018-12-14  8:23   ` Laurent Pinchart [this message]
2018-12-14  6:18 ` [PATCH 3/4] rcar-vin: make rvin_{start,stop}_streaming() available for internal use Niklas Söderlund
2018-12-14  8:27   ` Laurent Pinchart
2018-12-14  6:18 ` [PATCH 4/4] rcar-vin: add support for suspend and resume Niklas Söderlund
2018-12-14  8:37   ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=14327612.kiatMVmQX0@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox