[PATCH 1/2] v4l-utils: fixed dvbv5 vdr format

[Markus Heiser <markus.heiser@darmarit.de>]

From: Markus Heiser <markus.heiser@darmarIT.de>

From: Heiser, Markus <markus.heiser@darmarIT.de>

The vdr format was broken, I got '(null)' entries

HD:11494:S1HC23I0M5N1O35:S:(null):22000:5101:5102,5103,5106,5108:0:0:10301:0:0:0:
0-:1----:2--------------:3:4-----:

refering to the VDR Wikis ...

* LinuxTV: http://www.linuxtv.org/vdrwiki/index.php/Syntax_of_channels.conf
* german comunity Wiki: http://www.vdr-wiki.de/wiki/index.php/Channels.conf#Parameter_ab_VDR-1.7.4

There is no field at position 4 / in between "Source" and "SRate" which
might have a value. I suppose the '(null):' is the result of pointing
to *nothing*.

An other mistake is the ending colon (":") at the line. It is not
explicit specified but adding an collon to the end of an channel entry
will prevent players (like mpv or mplayer) from parsing the line (they
will ignore these lines).

At least: generating a channel list with

  dvbv5-scan --output-format=vdr ...

will result in the same defective channel entry, containing "(null):"
and the leading collon ":".

Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
---
 lib/libdvbv5/dvb-vdr-format.c | 45 +++++++++++++++++++++++++++++--------------
 1 file changed, 31 insertions(+), 14 deletions(-)

diff --git a/lib/libdvbv5/dvb-vdr-format.c b/lib/libdvbv5/dvb-vdr-format.c
index a4bd26b..ab0e5cf 100644
--- a/lib/libdvbv5/dvb-vdr-format.c
+++ b/lib/libdvbv5/dvb-vdr-format.c
@@ -309,13 +309,14 @@ int dvb_write_format_vdr(const char *fname,
 		fprintf(fp, "%s", entry->channel);
 		if (entry->vchannel)
 			fprintf(fp, ",%s", entry->vchannel);
+		fprintf(fp, ":");
 
 		/*
 		 * Output frequency:
 		 *	in kHz for terrestrial/cable
 		 *	in MHz for satellite
 		 */
-		fprintf(fp, ":%i:", freq / 1000);
+		fprintf(fp, "%i:", freq / 1000);
 
 		/* Output modulation parameters */
 		fmt = &formats[i];
@@ -349,20 +350,30 @@ int dvb_write_format_vdr(const char *fname,
 
 			fprintf(fp, "%s", table->table[data]);
 		}
-
-		/* Output format type */
-		fprintf(fp, ":%s:", id);
+		fprintf(fp, ":");
 
 		/*
-		 * Output satellite location
-		 * FIXME: probably require some adjustments to match the
-		 *	  format expected by VDR.
+		 * Output sources configuration for VDR
+		 *
+		 *   S (satellite) xy.z (orbital position in degrees) E or W (east or west)
+		 *
+		 *   FIXME: in case of ATSC we use "A", this is what w_scan does
 		 */
-		switch(delsys) {
-		case SYS_DVBS:
-		case SYS_DVBS2:
-			fprintf(fp, "%s:", entry->location);
+
+		if (entry->location) {
+			switch(delsys) {
+			case SYS_DVBS:
+			case SYS_DVBS2:
+				fprintf(fp, "%s", entry->location);
+				break;
+			default:
+				fprintf(fp, "%s", id);
+				break;
+			}
+		} else {
+			fprintf(fp, "%s", id);
 		}
+		fprintf(fp, ":");
 
 		/* Output symbol rate */
 		srate = 27500000;
@@ -407,10 +418,16 @@ int dvb_write_format_vdr(const char *fname,
 		/* Output Service ID */
 		fprintf(fp, "%d:", entry->service_id);
 
-		/* Output SID, NID, TID and RID */
-		fprintf(fp, "0:0:0:");
+		/* Output Network ID */
+		fprintf(fp, "0:");
 
-		fprintf(fp, "\n");
+		/* Output Transport Stream ID */
+		fprintf(fp, "0:");
+
+		/* Output Radio ID
+		 * this is the last entry, tagged bei a new line (not a colon!)
+		 */
+		fprintf(fp, "0\n");
 		line++;
 	};
 	fclose (fp);
-- 
2.7.4