From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ns.mm-sol.com ([37.157.136.199]:57215 "EHLO extserv.mm-sol.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753242AbcKNKZI (ORCPT ); Mon, 14 Nov 2016 05:25:08 -0500 From: Todor Tomov To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, mchehab@osg.samsung.com, hverkuil@xs4all.nl, geert@linux-m68k.org, matrandg@cisco.com, sakari.ailus@iki.fi, linux-media@vger.kernel.org, laurent.pinchart@ideasonboard.com Cc: Todor Tomov Subject: [PATCH v7 0/2] OV5645 camera sensor driver Date: Mon, 14 Nov 2016 12:24:34 +0200 Message-Id: <1479119076-26363-1-git-send-email-todor.tomov@linaro.org> Sender: linux-media-owner@vger.kernel.org List-ID: This is the seventh version of the OV5645 camera sensor driver patchset. Changes since version 6 include: - keep a pointer to the current sensor mode and remove enum ov5645_mode; - do not keep v4l2 control values and xclk frequency in the main data struct; - add caching variables in then main data struct for some of the register values to avoid i2c read commands; - use reference counting for power state; - enable xclk only after regulators are enabled; - add check for xclk rate that it is supported; - register v4l2 subdev only at the end of probe when the rest is succeeded; - add hardware pin names in gpio descriptions in the dt binding document; - other minor changes: uppercase to lowercase, add const modifier, remove unnecessary local variables, fix return values. Changes since version 5 include: - external clock frequency set in DT; - added v4l2_subdev_pad_ops.init_cfg function to initialize formats; - current sensor mode not updated if set_fmt is TRY (not ACTIVE); - other small changes - debug messages removed, register addresses defines renamed, redundant safety checks removed, unnecessary labels removed, mutex_destroy added. Two one-line changes since version 4: - return current format on set_format; - return all frame sizes when enumerating them. Only one change since version 3: - build failure on kernel v4.7-rc1 fixed: s/media_entity_init/media_entity_pads_init/ Changes from version 2 include: - external camera clock configuration is moved from DT to driver; - pwdn-gpios renamed to enable-gpios; - switched polarity of reset-gpios to the more intuitive active low; - added Kconfig dependency to OF; - return values checks; - regulators and gpios are now required (not optional); - regulators names renamed; - power counter variable changed to a bool power state; - ov5645_registered() is removed and sensor id reading moved to probe(). Changes from version 1 include: - patch split to dt binding doc patch and driver patch; - changes in power on/off logic - s_power is now not called on open/close; - using assigned-clock-rates in dt for setting camera external clock rate; - correct api for gpio handling; - return values checks; - style fixes. Todor Tomov (2): media: i2c/ov5645: add the device tree binding document media: Add a driver for the ov5645 camera sensor. .../devicetree/bindings/media/i2c/ov5645.txt | 54 + drivers/media/i2c/Kconfig | 12 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/ov5645.c | 1354 ++++++++++++++++++++ 4 files changed, 1421 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5645.txt create mode 100644 drivers/media/i2c/ov5645.c -- 1.9.1