From: Andreas Kemnade <andreas@kemnade.info>
To: linux-media@vger.kernel.org, mchehab@kernel.org
Cc: Andreas Kemnade <andreas@kemnade.info>
Subject: [PATCH RFC] dvb: af9035.c: Logilink vg0022a to device id table
Date: Thu, 9 Mar 2017 17:51:14 +0100 [thread overview]
Message-ID: <1489078274-24227-1-git-send-email-andreas@kemnade.info> (raw)
Ths adds the logilink VG00022a dvb-t dongle to the device table.
The dongle contains (checked by removing the case)
IT9303
SI2168
214730
The result is in cold state:
usb 1-6: new high-speed USB device number 15 using xhci_hcd
usb 1-6: New USB device found, idVendor=1d19, idProduct=0100
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: TS Aggregator
usb 1-6: Manufacturer: ITE Tech., Inc.
usb 1-6: SerialNumber: XXXXXXXXXXXX
dvb_usb_af9035 1-6:1.0: prechip_version=83 chip_version=01 chip_type=9306
dvb_usb_af9035 1-6:1.0: ts mode=5 not supported, defaulting to single tuner mode!
usb 1-6: dvb_usb_v2: found a 'Logilink VG0022A' in cold state
usb 1-6: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9303-01.fw'
dvb_usb_af9035 1-6:1.0: firmware version=1.4.0.0
usb 1-6: dvb_usb_v2: found a 'Logilink VG0022A' in warm state
usb 1-6: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
dvbdev: DVB: registering new adapter (Logilink VG0022A)
si2168: probe of 6-0067 failed with error -5
when warmed up by connecing it via a powered usb hub to win7 and
then attaching the same usb hub to a linux machine:
usb 1-6.2: New USB device found, idVendor=1d19, idProduct=0100
usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6.2: Product: TS Aggregator
usb 1-6.2: Manufacturer: ITE Tech., Inc.
usb 1-6.2: SerialNumber: XXXXXXXXXXXX
dvb_usb_af9035 1-6.2:1.0: prechip_version=83 chip_version=01 chip_type=9306
dvb_usb_af9035 1-6.2:1.0: ts mode=5 not supported, defaulting to single tuner mode!
usb 1-6.2: dvb_usb_v2: found a 'Logilink VG0022A' in warm state
usb 1-6.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
dvbdev: DVB: registering new adapter (Logilink VG0022A)
i2c i2c-6: Added multiplexed i2c bus 7
si2168 6-0067: Silicon Labs Si2168-B40 successfully identified
si2168 6-0067: firmware version: B 4.0.2
usb 1-6.2: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
si2157 7-0063: Silicon Labs Si2147/2148/2157/2158 successfully attached
usb 1-6.2: dvb_usb_v2: 'Logilink VG0022A' successfully initialized and connected
si2168 6-0067: Direct firmware load for dvb-demod-si2168-b40-01.fw failed with error -2
si2168 6-0067: Direct firmware load for dvb-demod-si2168-02.fw failed with error -2
si2168 6-0067: firmware file 'dvb-demod-si2168-02.fw' not found
si2157 7-0063: found a 'Silicon Labs Si2147-A30'
si2157 7-0063: firmware version: 3.0.5
same with the firmware for the si2168 available:
usb 1-6.2: new high-speed USB device number 12 using xhci_hcd
usb 1-6.2: New USB device found, idVendor=1d19, idProduct=0100
usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6.2: Product: TS Aggregator
usb 1-6.2: Manufacturer: ITE Tech., Inc.
usb 1-6.2: SerialNumber: XXXXXXXXXXXX
dvb_usb_af9035 1-6.2:1.0: prechip_version=83 chip_version=01 chip_type=9306
dvb_usb_af9035 1-6.2:1.0: ts mode=5 not supported, defaulting to single tuner mode!
usb 1-6.2: dvb_usb_v2: found a 'Logilink VG0022A' in warm state
usb 1-6.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
dvbdev: DVB: registering new adapter (Logilink VG0022A)
i2c i2c-6: Added multiplexed i2c bus 7
si2168 6-0067: Silicon Labs Si2168-B40 successfully identified
si2168 6-0067: firmware version: B 4.0.2
usb 1-6.2: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
si2157 7-0063: Silicon Labs Si2147/2148/2157/2158 successfully attached
usb 1-6.2: dvb_usb_v2: 'Logilink VG0022A' successfully initialized and connected
si2168 6-0067: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
si2168 6-0067: firmware version: B 4.0.11
si2157 7-0063: unknown chip version Si21255-\xffffffff\xffffffff\xffffffff
si2157 7-0063: unknown chip version Si21255-\xffffffff\xffffffff\xffffffff
so firmware uploading to the si2168 somehow messes things up
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
drivers/media/usb/dvb-usb-v2/af9035.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
index c673726..ed674b8 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.c
+++ b/drivers/media/usb/dvb-usb-v2/af9035.c
@@ -2141,6 +2141,8 @@ static const struct usb_device_id af9035_id_table[] = {
/* IT930x devices */
{ DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9303,
&it930x_props, "ITE 9303 Generic", NULL) },
+ { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x0100,
+ &it930x_props, "Logilink VG0022A", NULL) },
{ }
};
MODULE_DEVICE_TABLE(usb, af9035_id_table);
--
2.1.4
next reply other threads:[~2017-03-09 17:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-09 16:51 Andreas Kemnade [this message]
2017-03-14 6:26 ` [PATCH RFC] dvb: af9035.c: Logilink vg0022a to device id table Andreas Kemnade
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1489078274-24227-1-git-send-email-andreas@kemnade.info \
--to=andreas@kemnade.info \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).