From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: jean-philippe francois <jp.francois@cynove.com>
Cc: linux-media@vger.kernel.org, Sakari Ailus <sakari.ailus@iki.fi>
Subject: Re: [PATCH] omap3isp: preview: Add support for non-GRBG Bayer patterns
Date: Fri, 22 Jun 2012 01:29:05 +0200 [thread overview]
Message-ID: <1495058.aP2aaavdWk@avalon> (raw)
In-Reply-To: <CAGGh5h2NoojuguvRfQRsYx2xX1eRzXWw-sJYdnDgquWqoGbD-w@mail.gmail.com>
Hi Jean-Philippe,
On Thursday 21 June 2012 15:35:52 jean-philippe francois wrote:
> 2012/6/18 Laurent Pinchart <laurent.pinchart@ideasonboard.com>:
> > Rearrange the CFA interpolation coefficients table based on the Bayer
> > pattern. Modifying the table during streaming isn't supported anymore,
> > but didn't make sense in the first place anyway.
> >
> > Support for non-Bayer CFA patterns is dropped as they were not correctly
> > supported, and have never been tested.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> > drivers/media/video/omap3isp/isppreview.c | 118 ++++++++++++++----------
> > 1 files changed, 67 insertions(+), 51 deletions(-)
> >
> > Jean-Philippe,
> >
> > Could you please test this patch on your hardware ?
>
> Hi,
>
> I have applied it on top of your omap3isp-next branch, but my board is
> oopsing right after the boot. I will try to get rid of this oops, but if you
> eventually now another tree that includes the changes necessary for this
> patch to apply, it could perhaps save me some time.
The patch should apply on top of the omap3isp-omap3isp-next branch that I've
just pushed to my linuxtv tree.
> Here is a oops, in case somebody can point me to a patch, but the oops
> is not very specific :
>
> <6>Total of 96 interrupts on 1 active controller
> <4>omap_hwmod: arm_fck: missing clockdomain for arm_fck.
> <4>omap_hwmod: gpt1_fck: missing clockdomain for gpt1_fck.
> <6>OMAP clockevent source: GPTIMER1 at 32768 Hz
> <6>sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every
> 131071999ms <1>Unable to handle kernel NULL pointer dereference at virtual
> address 00000000 <1>pgd = c0004000
> <1>[00000000] *pgd=00000000
> <0>Internal error: Oops: 80000005 [#1] PREEMPT ARM
> <d>Modules linked in:
> CPU: 0 Not tainted (3.4.0-rc3 #2)
> PC is at 0x0
> LR is at __irq_svc+0x40/0x70
> pc : [<00000000>] lr : [<c000e280>] psr: 000001d3
> sp : c0461f88 ip : 0000000f fp : 00000000
> r10: 00000000 r9 : 413fc082 r8 : 80004059
> r7 : c0461fbc r6 : ffffffff r5 : 00000153 r4 : c04367e0
> r3 : c0010108 r2 : c0461fd0 r1 : c046b00c r0 : c0461f88
> Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel
> Control: 10c5387d Table: 80004019 DAC: 00000015
> <0>Process swapper (pid: 0, stack limit = 0xc04602e8)
> <0>Stack: (0xc0461f88 to 0xc0462000)
> <0>1f80: 00007735 000001d3 01ffffff c0468118 00000000
> c046808c <0>1fa0: c0456ec0 c046b004 80004059 413fc082 00000000 00000000
> 0000000f c0461fd0 <0>1fc0: c0010108 c04367e0 00000153 ffffffff 00000000
> 00000000 c04364fc 00000000 <0>1fe0: 00000000 c0456ec4 00000000 10c53c7d
> c046808c 8000803c 00000000 00000000 [<c000e280>] (__irq_svc+0x40/0x70) from
> [<c04367e0>] (start_kernel+0x138/0x254) [<c04367e0>]
> (start_kernel+0x138/0x254) from [<8000803c>] (0x8000803c) <0>Code: bad PC
> value
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2012-06-21 23:28 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-18 14:30 [PATCH] omap3isp: preview: Add support for non-GRBG Bayer patterns Laurent Pinchart
2012-06-21 13:35 ` jean-philippe francois
2012-06-21 23:29 ` Laurent Pinchart [this message]
2012-06-22 14:19 ` jean-philippe francois
2012-06-23 8:22 ` Sakari Ailus
2012-06-26 1:30 ` Laurent Pinchart
2012-06-26 19:01 ` Sakari Ailus
2012-06-27 14:07 ` Laurent Pinchart
2012-06-27 13:42 ` Ivan T. Ivanov
2012-06-27 13:54 ` Laurent Pinchart
2012-06-27 14:30 ` Ivan T. Ivanov
2012-06-27 14:42 ` Laurent Pinchart
2012-06-27 14:43 ` Ivan T. Ivanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495058.aP2aaavdWk@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=jp.francois@cynove.com \
--cc=linux-media@vger.kernel.org \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox