linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yong Zhi <yong.zhi@intel.com>
To: linux-media@vger.kernel.org, sakari.ailus@linux.intel.com
Cc: jian.xu.zheng@intel.com, tfiga@chromium.org,
	rajmohan.mani@intel.com, tuukka.toivonen@intel.com,
	hverkuil@xs4all.nl, hyungwoo.yang@intel.com,
	Yong Zhi <yong.zhi@intel.com>
Subject: [PATCH v2 0/3]  [media] add IPU3 CIO2 CSI2 driver
Date: Tue,  6 Jun 2017 20:34:36 -0500	[thread overview]
Message-ID: <1496799279-8774-1-git-send-email-yong.zhi@intel.com> (raw)

This patch adds the driver for the CIO2 device found in some the Skylake
and Kaby Kake SoCs. The CIO2 consists of four D-PHY receivers.

The CIO2 driver exposes V4L2, V4L2 sub-device and Media controller
interfaces to the user space.

===========
= history =
===========
version 2:
- remove all explicit DMA flush operations
- change dma_free_noncoherent() to dma_free_coherent()
- remove cio2_hw_mipi_lanes()
- replace v4l2_g_ext_ctrls() with v4l2_ctrl_g_ctrl()
  in cio2_csi2_calc_timing().
- use ffs() to iterate the port_status in cio2_irq()
- add static inline file_to_cio2_queue() function
- comment dma_wmb(), cio2_rx_timing() and few other places
- use ktime_get_ns() for vb2_buf.timestamp in cio2_buffer_done()
- use of SET_RUNTIME_PM_OPS() macro for cio2_pm_ops
- use BIT() macro for bit difinitions
- remove un-used macros such as CIO2_QUEUE_WIDTH() in ipu3-cio2.h
- move the MODULE_AUTHOR() to the end of the file
- change file path to drivers/media/pci/intel/ipu3

version 1:
- Initial submission
Yong Zhi (3):
  [media] videodev2.h, v4l2-ioctl: add IPU3 raw10 color format
  [media] doc-rst: add IPU3 raw10 bayer pixel format definitions
  [media] intel-ipu3: cio2: Add new MIPI-CSI2 driver

 Documentation/media/uapi/v4l/pixfmt-rgb.rst        |    1 +
 .../media/uapi/v4l/pixfmt-srggb10-ipu3.rst         |   62 +
 drivers/media/pci/Kconfig                          |    2 +
 drivers/media/pci/Makefile                         |    3 +-
 drivers/media/pci/intel/Makefile                   |    5 +
 drivers/media/pci/intel/ipu3/Kconfig               |   17 +
 drivers/media/pci/intel/ipu3/Makefile              |    1 +
 drivers/media/pci/intel/ipu3/ipu3-cio2.c           | 1788 ++++++++++++++++++++
 drivers/media/pci/intel/ipu3/ipu3-cio2.h           |  424 +++++
 drivers/media/v4l2-core/v4l2-ioctl.c               |    4 +
 include/uapi/linux/videodev2.h                     |    5 +
 11 files changed, 2311 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/media/uapi/v4l/pixfmt-srggb10-ipu3.rst
 create mode 100644 drivers/media/pci/intel/Makefile
 create mode 100644 drivers/media/pci/intel/ipu3/Kconfig
 create mode 100644 drivers/media/pci/intel/ipu3/Makefile
 create mode 100644 drivers/media/pci/intel/ipu3/ipu3-cio2.c
 create mode 100644 drivers/media/pci/intel/ipu3/ipu3-cio2.h

-- 
2.7.4

             reply	other threads:[~2017-06-07  1:34 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-07  1:34 Yong Zhi [this message]
2017-06-07  1:34 ` [PATCH v2 1/3] [media] videodev2.h, v4l2-ioctl: add IPU3 raw10 color format Yong Zhi
2017-06-07  1:34 ` [PATCH v2 2/3] [media] doc-rst: add IPU3 raw10 bayer pixel format definitions Yong Zhi
2017-06-07 17:55   ` Alan Cox
2017-06-07  1:34 ` [PATCH v2 3/3] [media] intel-ipu3: cio2: Add new MIPI-CSI2 driver Yong Zhi
2017-06-12  9:59   ` Tomasz Figa
2017-06-13  8:58     ` Tuukka Toivonen
2017-06-13  9:18       ` Tomasz Figa
2017-06-16 11:48     ` Sakari Ailus
2017-06-26 14:51     ` Sakari Ailus
2017-06-27  9:33       ` Tomasz Figa
2017-06-28 13:31         ` Sakari Ailus
2017-06-28 13:36           ` Tomasz Figa
2017-06-28 14:55             ` Sakari Ailus
     [not found]           ` <CGME20170628154447epcas5p28ba0ff617f6e640185fada0e955e24b0@epcas5p2.samsung.com>
2017-06-28 15:44             ` Sylwester Nawrocki
2017-06-28 15:56               ` Sakari Ailus
2017-10-06 19:19     ` Zhi, Yong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1496799279-8774-1-git-send-email-yong.zhi@intel.com \
    --to=yong.zhi@intel.com \
    --cc=hverkuil@xs4all.nl \
    --cc=hyungwoo.yang@intel.com \
    --cc=jian.xu.zheng@intel.com \
    --cc=linux-media@vger.kernel.org \
    --cc=rajmohan.mani@intel.com \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tfiga@chromium.org \
    --cc=tuukka.toivonen@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).