Linux Media Controller development
 help / color / mirror / Atom feed
From: Todor Tomov <todor.tomov@linaro.org>
To: mchehab@kernel.org, hans.verkuil@cisco.com,
	javier@osg.samsung.com, s.nawrocki@samsung.com,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org
Cc: Todor Tomov <todor.tomov@linaro.org>
Subject: [PATCH v2 13/19] camss: vfe: Support for frame padding
Date: Mon, 19 Jun 2017 17:48:33 +0300	[thread overview]
Message-ID: <1497883719-12410-14-git-send-email-todor.tomov@linaro.org> (raw)
In-Reply-To: <1497883719-12410-1-git-send-email-todor.tomov@linaro.org>

Add support for horizontal and vertical frame padding.

Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
---
 drivers/media/platform/qcom/camss-8x16/vfe.c   | 86 ++++++++++++++++++++------
 drivers/media/platform/qcom/camss-8x16/video.c | 66 +++++++++++++++-----
 drivers/media/platform/qcom/camss-8x16/video.h |  2 +
 3 files changed, 118 insertions(+), 36 deletions(-)

diff --git a/drivers/media/platform/qcom/camss-8x16/vfe.c b/drivers/media/platform/qcom/camss-8x16/vfe.c
index 0964e23..433a54e 100644
--- a/drivers/media/platform/qcom/camss-8x16/vfe.c
+++ b/drivers/media/platform/qcom/camss-8x16/vfe.c
@@ -279,21 +279,75 @@ static void vfe_wm_frame_based(struct vfe_device *vfe, u8 wm, u8 enable)
 			1 << VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_FRM_BASED_SHIFT);
 }
 
+#define CALC_WORD(width, M, N) (((width) * (M) + (N) - 1) / (N))
+
+static int vfe_word_per_line(uint32_t format, uint32_t pixel_per_line)
+{
+	int val = 0;
+
+	switch (format) {
+	case V4L2_PIX_FMT_NV12:
+	case V4L2_PIX_FMT_NV21:
+	case V4L2_PIX_FMT_NV16:
+	case V4L2_PIX_FMT_NV61:
+		val = CALC_WORD(pixel_per_line, 1, 8);
+		break;
+	case V4L2_PIX_FMT_YUYV:
+	case V4L2_PIX_FMT_YVYU:
+	case V4L2_PIX_FMT_UYVY:
+	case V4L2_PIX_FMT_VYUY:
+		val = CALC_WORD(pixel_per_line, 2, 8);
+		break;
+	}
+
+	return val;
+}
+
+static void vfe_get_wm_sizes(struct v4l2_pix_format_mplane *pix, u8 plane,
+			     u16 *width, u16 *height, u16 *bytesperline)
+{
+	switch (pix->pixelformat) {
+	case V4L2_PIX_FMT_NV12:
+	case V4L2_PIX_FMT_NV21:
+		*width = pix->width;
+		*height = pix->height;
+		*bytesperline = pix->plane_fmt[0].bytesperline;
+		if (plane == 1)
+			*height /= 2;
+		break;
+	case V4L2_PIX_FMT_NV16:
+	case V4L2_PIX_FMT_NV61:
+		*width = pix->width;
+		*height = pix->height;
+		*bytesperline = pix->plane_fmt[0].bytesperline;
+		break;
+	}
+}
+
 static void vfe_wm_line_based(struct vfe_device *vfe, u32 wm,
-			      u16 width, u16 height, u32 enable)
+			      struct v4l2_pix_format_mplane *pix,
+			      u8 plane, u32 enable)
 {
 	u32 reg;
 
 	if (enable) {
+		u16 width = 0, height = 0, bytesperline = 0, wpl;
+
+		vfe_get_wm_sizes(pix, plane, &width, &height, &bytesperline);
+
+		wpl = vfe_word_per_line(pix->pixelformat, width);
+
 		reg = height - 1;
-		reg |= (width / 16 - 1) << 16;
+		reg |= ((wpl + 1) / 2 - 1) << 16;
 
 		writel_relaxed(reg, vfe->base +
 			       VFE_0_BUS_IMAGE_MASTER_n_WR_IMAGE_SIZE(wm));
 
+		wpl = vfe_word_per_line(pix->pixelformat, bytesperline);
+
 		reg = 0x3;
 		reg |= (height - 1) << 4;
-		reg |= (width / 8) << 16;
+		reg |= wpl << 16;
 
 		writel_relaxed(reg, vfe->base +
 			       VFE_0_BUS_IMAGE_MASTER_n_WR_BUFFER_CFG(wm));
@@ -1197,25 +1251,14 @@ static int vfe_enable_output(struct vfe_line *line)
 	} else {
 		ub_size /= output->wm_num;
 		for (i = 0; i < output->wm_num; i++) {
-			u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
-
 			vfe_set_cgc_override(vfe, output->wm_idx[i], 1);
 			vfe_wm_set_subsample(vfe, output->wm_idx[i]);
 			vfe_wm_set_ub_cfg(vfe, output->wm_idx[i],
 					  (ub_size + 1) * output->wm_idx[i],
 					  ub_size);
-			if ((i == 1) &&	(p == V4L2_PIX_FMT_NV12 ||
-						p == V4L2_PIX_FMT_NV21))
-				vfe_wm_line_based(vfe, output->wm_idx[i],
-						  line->fmt[MSM_VFE_PAD_SRC].width,
-						  line->fmt[MSM_VFE_PAD_SRC].height / 2,
-						  1);
-			else
-				vfe_wm_line_based(vfe, output->wm_idx[i],
-						  line->fmt[MSM_VFE_PAD_SRC].width,
-						  line->fmt[MSM_VFE_PAD_SRC].height,
-						  1);
-
+			vfe_wm_line_based(vfe, output->wm_idx[i],
+					&line->video_out.active_fmt.fmt.pix_mp,
+					i, 1);
 			vfe_wm_enable(vfe, output->wm_idx[i], 1);
 			vfe_bus_reload_wm(vfe, output->wm_idx[i]);
 		}
@@ -1277,7 +1320,7 @@ static int vfe_disable_output(struct vfe_line *line)
 		spin_unlock_irqrestore(&vfe->output_lock, flags);
 	} else {
 		for (i = 0; i < output->wm_num; i++) {
-			vfe_wm_line_based(vfe, output->wm_idx[i], 0, 0, 0);
+			vfe_wm_line_based(vfe, output->wm_idx[i], NULL, i, 0);
 			vfe_set_cgc_override(vfe, output->wm_idx[i], 0);
 		}
 
@@ -2356,9 +2399,14 @@ int msm_vfe_register_entities(struct vfe_device *vfe,
 		}
 
 		video_out->ops = &camss_vfe_video_ops;
+		video_out->bpl_alignment = 8;
+		video_out->line_based = 0;
 		video_out->fmt_tag = CAMSS_FMT_TAG_RDI;
-		if (i == VFE_LINE_PIX)
+		if (i == VFE_LINE_PIX) {
+			video_out->bpl_alignment = 16;
+			video_out->line_based = 1;
 			video_out->fmt_tag = CAMSS_FMT_TAG_PIX;
+		}
 		snprintf(name, ARRAY_SIZE(name), "%s%d_%s%d",
 			 MSM_VFE_NAME, vfe->id, "video", i);
 		ret = msm_video_register(video_out, v4l2_dev, name);
diff --git a/drivers/media/platform/qcom/camss-8x16/video.c b/drivers/media/platform/qcom/camss-8x16/video.c
index 36c949d..1104544 100644
--- a/drivers/media/platform/qcom/camss-8x16/video.c
+++ b/drivers/media/platform/qcom/camss-8x16/video.c
@@ -194,13 +194,15 @@ static int video_find_format_n(u32 code, u32 index, enum camss_fmt_tag tag)
  * @mbus: v4l2_mbus_framefmt format
  * @pix: v4l2_pix_format_mplane format (output)
  * @index: index of an entry in formats array to be used for the conversion
+ * @alignment: bytesperline alignment value
  *
  * Fill the output pix structure with information from the input mbus format.
  *
  * Return 0 on success or a negative error code otherwise
  */
 static int video_mbus_to_pix_mp(const struct v4l2_mbus_framefmt *mbus,
-				struct v4l2_pix_format_mplane *pix, int index)
+				struct v4l2_pix_format_mplane *pix, int index,
+				unsigned int alignment)
 {
 	const struct format_info *f;
 	unsigned int i;
@@ -215,7 +217,7 @@ static int video_mbus_to_pix_mp(const struct v4l2_mbus_framefmt *mbus,
 	for (i = 0; i < pix->num_planes; i++) {
 		bytesperline = pix->width / f->hsub[i].numerator *
 			f->hsub[i].denominator * f->bpp[i] / 8;
-		bytesperline = ALIGN(bytesperline, 8);
+		bytesperline = ALIGN(bytesperline, alignment);
 		pix->plane_fmt[i].bytesperline = bytesperline;
 		pix->plane_fmt[i].sizeimage = pix->height /
 				f->vsub[i].numerator * f->vsub[i].denominator *
@@ -270,7 +272,8 @@ static int video_get_subdev_format(struct camss_video *video,
 	if (ret < 0)
 		return ret;
 
-	return video_mbus_to_pix_mp(&fmt.format, &format->fmt.pix_mp, ret);
+	return video_mbus_to_pix_mp(&fmt.format, &format->fmt.pix_mp, ret,
+				    video->bpl_alignment);
 }
 
 static int video_get_pixelformat(struct camss_video *video, u32 *pixelformat,
@@ -398,7 +401,6 @@ static int video_check_format(struct camss_video *video)
 	struct v4l2_pix_format_mplane *pix = &video->active_fmt.fmt.pix_mp;
 	struct v4l2_pix_format_mplane *sd_pix;
 	struct v4l2_format format;
-	unsigned int i;
 	int ret;
 
 	sd_pix = &format.fmt.pix_mp;
@@ -414,13 +416,6 @@ static int video_check_format(struct camss_video *video)
 	    pix->field != format.fmt.pix_mp.field)
 		return -EINVAL;
 
-	for (i = 0; i < pix->num_planes; i++)
-		if (pix->plane_fmt[i].bytesperline !=
-				sd_pix->plane_fmt[i].bytesperline ||
-		    pix->plane_fmt[i].sizeimage !=
-				sd_pix->plane_fmt[i].sizeimage)
-			return -EINVAL;
-
 	return 0;
 }
 
@@ -548,31 +543,68 @@ static int video_g_fmt(struct file *file, void *fh, struct v4l2_format *f)
 	return 0;
 }
 
-static int video_s_fmt(struct file *file, void *fh, struct v4l2_format *f)
+static int video_try_fmt(struct file *file, void *fh, struct v4l2_format *f)
 {
 	struct camss_video *video = video_drvdata(file);
+	struct v4l2_plane_pix_format *p;
+	u32 bytesperline[3] = { 0 };
+	u32 sizeimage[3] = { 0 };
+	u32 lines;
 	int ret;
+	int i;
 
 	if (f->type != video->type)
 		return -EINVAL;
 
+	if (video->line_based)
+		for (i = 0; i < f->fmt.pix_mp.num_planes && i < 3; i++) {
+			p = &f->fmt.pix_mp.plane_fmt[i];
+			bytesperline[i] = clamp_t(u32, p->bytesperline,
+						  1, 65528);
+			sizeimage[i] = clamp_t(u32, p->sizeimage,
+					       bytesperline[i],
+					       bytesperline[i] * 4096);
+		}
+
 	ret = video_get_subdev_format(video, f);
 	if (ret < 0)
 		return ret;
 
-	video->active_fmt = *f;
+	if (video->line_based)
+		for (i = 0; i < f->fmt.pix_mp.num_planes; i++) {
+			p = &f->fmt.pix_mp.plane_fmt[i];
+			p->bytesperline = clamp_t(u32, p->bytesperline,
+						  1, 65528);
+			p->sizeimage = clamp_t(u32, p->sizeimage,
+					       p->bytesperline,
+					       p->bytesperline * 4096);
+			lines = p->sizeimage / p->bytesperline;
+
+			if (p->bytesperline < bytesperline[i])
+				p->bytesperline = ALIGN(bytesperline[i], 8);
+
+			if (p->sizeimage < p->bytesperline * lines)
+				p->sizeimage = p->bytesperline * lines;
+
+			if (p->sizeimage < sizeimage[i])
+				p->sizeimage = sizeimage[i];
+		}
 
 	return 0;
 }
 
-static int video_try_fmt(struct file *file, void *fh, struct v4l2_format *f)
+static int video_s_fmt(struct file *file, void *fh, struct v4l2_format *f)
 {
 	struct camss_video *video = video_drvdata(file);
+	int ret;
 
-	if (f->type != video->type)
-		return -EINVAL;
+	ret = video_try_fmt(file, fh, f);
+	if (ret < 0)
+		return ret;
 
-	return video_get_subdev_format(video, f);
+	video->active_fmt = *f;
+
+	return 0;
 }
 
 static int video_enum_input(struct file *file, void *fh,
diff --git a/drivers/media/platform/qcom/camss-8x16/video.h b/drivers/media/platform/qcom/camss-8x16/video.h
index 8f06c92..5130964 100644
--- a/drivers/media/platform/qcom/camss-8x16/video.h
+++ b/drivers/media/platform/qcom/camss-8x16/video.h
@@ -57,6 +57,8 @@ struct camss_video {
 	const struct camss_video_ops *ops;
 	struct mutex lock;
 	struct mutex q_lock;
+	unsigned int bpl_alignment;
+	unsigned int line_based;
 	enum camss_fmt_tag fmt_tag;
 };
 
-- 
1.9.1

  parent reply	other threads:[~2017-06-19 14:56 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-19 14:48 [PATCH v2 00/19] Qualcomm 8x16 Camera Subsystem driver Todor Tomov
2017-06-19 14:48 ` [PATCH v2 01/19] doc: DT: camss: Binding document for Qualcomm Camera subsystem driver Todor Tomov
2017-06-23 20:41   ` Rob Herring
2017-06-29 12:11     ` Todor Tomov
2017-06-19 14:48 ` [PATCH v2 02/19] MAINTAINERS: Add " Todor Tomov
2017-06-19 14:48 ` [PATCH v2 03/19] doc: media/v4l-drivers: Add Qualcomm Camera Subsystem driver document Todor Tomov
2017-06-19 14:48 ` [PATCH v2 04/19] media: camss: Add CSIPHY files Todor Tomov
2017-06-28 21:34   ` Sakari Ailus
2017-06-29 16:36     ` Todor Tomov
2017-06-29 23:53       ` Sakari Ailus
2017-06-30  7:00         ` Todor Tomov
2017-06-30  8:05           ` Sakari Ailus
2017-06-19 14:48 ` [PATCH v2 05/19] media: camss: Add CSID files Todor Tomov
2017-07-03 10:49   ` Hans Verkuil
2017-07-03 14:10     ` Todor Tomov
2017-06-19 14:48 ` [PATCH v2 06/19] media: camss: Add ISPIF files Todor Tomov
2017-06-19 14:48 ` [PATCH v2 07/19] media: camss: Add VFE files Todor Tomov
2017-06-19 14:48 ` [PATCH v2 08/19] media: camss: Add files which handle the video device nodes Todor Tomov
2017-07-03 11:32   ` Hans Verkuil
2017-07-06 13:44     ` Todor Tomov
2017-07-06 14:43       ` Hans Verkuil
2017-06-19 14:48 ` [PATCH v2 09/19] media: camms: Add core files Todor Tomov
2017-06-29  6:33   ` Sakari Ailus
2017-07-03 14:03     ` Todor Tomov
2017-07-04  5:43       ` Sakari Ailus
2017-07-03 11:24   ` Hans Verkuil
2017-07-03 14:12     ` Todor Tomov
2017-06-19 14:48 ` [PATCH v2 10/19] media: camss: Enable building Todor Tomov
2017-06-20 10:30   ` kbuild test robot
2017-06-20 11:20     ` Todor Tomov
2017-06-19 14:48 ` [PATCH v2 11/19] camss: vfe: Format conversion support using PIX interface Todor Tomov
2017-06-19 14:48 ` [PATCH v2 12/19] doc: media/v4l-drivers: Qualcomm Camera Subsystem - PIX Interface Todor Tomov
2017-06-19 14:48 ` Todor Tomov [this message]
2017-06-19 14:48 ` [PATCH v2 14/19] camss: vfe: Add interface for scaling Todor Tomov
2017-06-19 14:48 ` [PATCH v2 15/19] camss: vfe: Configure scaler module in VFE Todor Tomov
2017-06-19 14:48 ` [PATCH v2 16/19] camss: vfe: Add interface for cropping Todor Tomov
2017-06-19 14:48 ` [PATCH v2 17/19] camss: vfe: Configure crop module in VFE Todor Tomov
2017-06-19 14:48 ` [PATCH v2 18/19] doc: media/v4l-drivers: Qualcomm Camera Subsystem - Scale and crop Todor Tomov
2017-06-19 14:48 ` [PATCH v2 19/19] camss: Use optimal clock frequency rates Todor Tomov
2017-07-03 11:36 ` [PATCH v2 00/19] Qualcomm 8x16 Camera Subsystem driver Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1497883719-12410-14-git-send-email-todor.tomov@linaro.org \
    --to=todor.tomov@linaro.org \
    --cc=hans.verkuil@cisco.com \
    --cc=javier@osg.samsung.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=s.nawrocki@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox