From: Hugues Fruchet <hugues.fruchet@st.com>
To: Steve Longerbeam <slongerbeam@gmail.com>,
Sakari Ailus <sakari.ailus@iki.fi>,
Hans Verkuil <hverkuil@xs4all.nl>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>
Cc: <linux-media@vger.kernel.org>,
Hugues Fruchet <hugues.fruchet@st.com>,
Benjamin Gaignard <benjamin.gaignard@linaro.org>
Subject: [PATCH v2 4/4] media: ov5640: add support of RGB565 and YUYV formats
Date: Wed, 29 Nov 2017 18:11:12 +0100 [thread overview]
Message-ID: <1511975472-26659-5-git-send-email-hugues.fruchet@st.com> (raw)
In-Reply-To: <1511975472-26659-1-git-send-email-hugues.fruchet@st.com>
Add RGB565 (LE & BE) and YUV422 YUYV format in addition
to existing YUV422 UYVY format.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
drivers/media/i2c/ov5640.c | 74 +++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 67 insertions(+), 7 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 826b102..70239bb 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -77,8 +77,10 @@
#define OV5640_REG_HZ5060_CTRL01 0x3c01
#define OV5640_REG_SIGMADELTA_CTRL0C 0x3c0c
#define OV5640_REG_FRAME_CTRL01 0x4202
+#define OV5640_REG_FORMAT_CONTROL00 0x4300
#define OV5640_REG_MIPI_CTRL00 0x4800
#define OV5640_REG_DEBUG_MODE 0x4814
+#define OV5640_REG_ISP_FORMAT_MUX_CTRL 0x501f
#define OV5640_REG_PRE_ISP_TEST_SET1 0x503d
#define OV5640_REG_SDE_CTRL0 0x5580
#define OV5640_REG_SDE_CTRL1 0x5581
@@ -106,6 +108,18 @@ enum ov5640_frame_rate {
OV5640_NUM_FRAMERATES,
};
+struct ov5640_pixfmt {
+ u32 code;
+ u32 colorspace;
+};
+
+static const struct ov5640_pixfmt ov5640_formats[] = {
+ { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_SRGB, },
+ { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_SRGB, },
+ { MEDIA_BUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB, },
+ { MEDIA_BUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB, },
+};
+
/*
* FIXME: remove this when a subdev API becomes available
* to set the MIPI CSI-2 virtual channel.
@@ -1787,17 +1801,23 @@ static int ov5640_try_fmt_internal(struct v4l2_subdev *sd,
{
struct ov5640_dev *sensor = to_ov5640_dev(sd);
const struct ov5640_mode_info *mode;
+ int i;
mode = ov5640_find_mode(sensor, fr, fmt->width, fmt->height, true);
if (!mode)
return -EINVAL;
-
fmt->width = mode->width;
fmt->height = mode->height;
- fmt->code = sensor->fmt.code;
if (new_mode)
*new_mode = mode;
+
+ for (i = 0; i < ARRAY_SIZE(ov5640_formats); i++)
+ if (ov5640_formats[i].code == fmt->code)
+ break;
+ if (i >= ARRAY_SIZE(ov5640_formats))
+ fmt->code = ov5640_formats[0].code;
+
return 0;
}
@@ -1840,6 +1860,45 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
return ret;
}
+static int ov5640_set_framefmt(struct ov5640_dev *sensor,
+ struct v4l2_mbus_framefmt *format)
+{
+ int ret = 0;
+ bool is_rgb = false;
+ u8 val;
+
+ switch (format->code) {
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ /* YUV422, UYVY */
+ val = 0x3f;
+ break;
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ /* YUV422, YUYV */
+ val = 0x30;
+ break;
+ case MEDIA_BUS_FMT_RGB565_2X8_LE:
+ /* RGB565 {g[2:0],b[4:0]},{r[4:0],g[5:3]} */
+ val = 0x6F;
+ is_rgb = true;
+ break;
+ case MEDIA_BUS_FMT_RGB565_2X8_BE:
+ /* RGB565 {r[4:0],g[5:3]},{g[2:0],b[4:0]} */
+ val = 0x61;
+ is_rgb = true;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* FORMAT CONTROL00: YUV and RGB formatting */
+ ret = ov5640_write_reg(sensor, OV5640_REG_FORMAT_CONTROL00, val);
+ if (ret)
+ return ret;
+
+ /* FORMAT MUX CONTROL: ISP YUV or RGB */
+ return ov5640_write_reg(sensor, OV5640_REG_ISP_FORMAT_MUX_CTRL,
+ is_rgb ? 0x01 : 0x00);
+}
/*
* Sensor Controls.
@@ -2225,15 +2284,12 @@ static int ov5640_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_mbus_code_enum *code)
{
- struct ov5640_dev *sensor = to_ov5640_dev(sd);
-
if (code->pad != 0)
return -EINVAL;
- if (code->index != 0)
+ if (code->index >= ARRAY_SIZE(ov5640_formats))
return -EINVAL;
- code->code = sensor->fmt.code;
-
+ code->code = ov5640_formats[code->index].code;
return 0;
}
@@ -2249,6 +2305,10 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
ret = ov5640_set_mode(sensor, sensor->current_mode);
if (ret)
goto out;
+
+ ret = ov5640_set_framefmt(sensor, &sensor->fmt);
+ if (ret)
+ goto out;
}
if (sensor->ep.bus_type == V4L2_MBUS_CSI2)
--
1.9.1
prev parent reply other threads:[~2017-11-29 17:11 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-29 17:11 [PATCH v2 0/4] Add OV5640 parallel interface and RGB565/YUYV support Hugues Fruchet
2017-11-29 17:11 ` [PATCH v2 1/4] media: ov5640: switch to gpiod_set_value_cansleep() Hugues Fruchet
2017-11-29 17:11 ` [PATCH v2 2/4] media: ov5640: check chip id Hugues Fruchet
2017-11-30 19:07 ` Fabio Estevam
2017-12-06 10:02 ` Hugues FRUCHET
2017-12-03 21:34 ` Steve Longerbeam
2017-12-06 9:47 ` Hugues FRUCHET
2017-11-29 17:11 ` [PATCH v2 3/4] media: ov5640: add support of DVP parallel interface Hugues Fruchet
2017-11-30 19:09 ` Fabio Estevam
2017-12-06 10:04 ` Hugues FRUCHET
2017-12-03 21:58 ` Steve Longerbeam
2017-12-06 10:01 ` Hugues FRUCHET
2017-11-29 17:11 ` Hugues Fruchet [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511975472-26659-5-git-send-email-hugues.fruchet@st.com \
--to=hugues.fruchet@st.com \
--cc=benjamin.gaignard@linaro.org \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@iki.fi \
--cc=slongerbeam@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox