From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-pl0-f68.google.com ([209.85.160.68]:35053 "EHLO mail-pl0-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754144AbeAGQyt (ORCPT ); Sun, 7 Jan 2018 11:54:49 -0500 From: Akinobu Mita To: linux-media@vger.kernel.org, devicetree@vger.kernel.org Cc: Akinobu Mita , Jacopo Mondi , "H . Nikolaus Schaller" , Hugues Fruchet , Sakari Ailus , Mauro Carvalho Chehab , Rob Herring Subject: [PATCH v2 2/2] media: ov9650: add device tree binding Date: Mon, 8 Jan 2018 01:54:24 +0900 Message-Id: <1515344064-23156-3-git-send-email-akinobu.mita@gmail.com> In-Reply-To: <1515344064-23156-1-git-send-email-akinobu.mita@gmail.com> References: <1515344064-23156-1-git-send-email-akinobu.mita@gmail.com> Sender: linux-media-owner@vger.kernel.org List-ID: Now the ov9650 driver supports device tree probing. So this adds a device tree binding documentation. Cc: Jacopo Mondi Cc: H. Nikolaus Schaller Cc: Hugues Fruchet Cc: Sakari Ailus Cc: Mauro Carvalho Chehab Cc: Rob Herring Signed-off-by: Akinobu Mita --- * Changelog v2 - Split binding documentation, suggested by Rob Herring and Jacopo Mondi - Improve the wording for compatible property in the binding documentation, suggested by Jacopo Mondi - Improve the description for the device node in the binding documentation, suggested by Sakari Ailus .../devicetree/bindings/media/i2c/ov9650.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ov9650.txt diff --git a/Documentation/devicetree/bindings/media/i2c/ov9650.txt b/Documentation/devicetree/bindings/media/i2c/ov9650.txt new file mode 100644 index 0000000..506dfc5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov9650.txt @@ -0,0 +1,36 @@ +* Omnivision OV9650/OV9652 CMOS sensor + +Required Properties: +- compatible: shall be one of + "ovti,ov9650" + "ovti,ov9652" +- clocks: reference to the xvclk input clock. + +Optional Properties: +- reset-gpios: reference to the GPIO connected to the resetb pin, if any. + Active is high. +- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any. + Active is high. + +The device node shall contain one 'port' child node with one child 'endpoint' +subnode for its digital output video port, in accordance with the video +interface bindings defined in Documentation/devicetree/bindings/media/ +video-interfaces.txt. + +Example: + +&i2c0 { + ov9650: camera@30 { + compatible = "ovti,ov9650"; + reg = <0x30>; + reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_HIGH>; + clocks = <&xclk>; + + port { + ov9650_0: endpoint { + remote-endpoint = <&vcap1_in0>; + }; + }; + }; +}; -- 2.7.4