Linux Media Controller development
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: airlied@linux.ie, hans.verkuil@cisco.com, lee.jones@linaro.org,
	olof@lixom.net, seanpaul@google.com
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	sadolfsson@google.com, felixe@google.com, bleung@google.com,
	darekm@google.com, marcheu@chromium.org, fparent@baylibre.com,
	dri-devel@lists.freedesktop.org, linux-media@vger.kernel.org,
	intel-gfx@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	eballetbo@gmail.com
Subject: [PATCH v2 0/5] Add ChromeOS EC CEC Support
Date: Fri, 18 May 2018 15:04:59 +0200	[thread overview]
Message-ID: <1526648704-16873-1-git-send-email-narmstrong@baylibre.com> (raw)

Hi All,

The new Google "Fizz" Intel-based ChromeOS device is gaining CEC support
through it's Embedded Controller, to enable the Linux CEC Core to communicate
with it and get the CEC Physical Address from the correct HDMI Connector, the
following must be added/changed:
- Add the CEC sub-device registration in the ChromeOS EC MFD Driver
- Add the CEC related commands and events definitions into the EC MFD driver
- Add a way to get a CEC notifier with it's (optional) connector name
- Add the CEC notifier to the i915 HDMI driver
- Add the proper ChromeOS EC CEC Driver

The CEC notifier with the connector name is the tricky point, since even on
Device-Tree platforms, there is no way to distinguish between multiple HDMI
connectors from the same DRM driver. The solution I implemented is pretty
simple and only adds an optional connector name to eventually distinguish
an HDMI connector notifier from another if they share the same device.

Feel free to comment this patchset !

Changes since v2:
 - Add i915 port_identifier() and use this stable name as cec_notifier conn name
 - Fixed and cleaned up the CEC commands and events handling
 - Rebased the CEC sub-device registration on top of Enric's serie
 - Fixed comments typo on cec driver
 - Protected the DMI match only with PCI and DMI Kconfigs

Changes since v1:
 - Added cec_notifier_put to intel_hdmi
 - Fixed all small reported issues on the EC CEC driver
 - Moved the cec_notifier_get out of the #if .. #else .. #endif

Changes since RFC:
 - Moved CEC sub-device registration after CEC commands and events definitions patch
 - Removed get_notifier_get_byname
 - Added CEC_CORE select into i915 Kconfig
 - Removed CEC driver fallback if notifier is not configured on HW, added explicit warn
 - Fixed CEC core return type on error
 - Moved to cros-ec-cec media platform directory
 - Use bus_find_device() to find the pci i915 device instead of get_notifier_get_byname()
 - Fix Logical Address setup
 - Added comment about HW support
 - Removed memset of msg structures

Neil Armstrong (5):
  media: cec-notifier: Get notifier by device and connector name
  drm/i915: hdmi: add CEC notifier to intel_hdmi
  mfd: cros-ec: Introduce CEC commands and events definitions.
  mfd: cros_ec_dev: Add CEC sub-device registration
  media: platform: Add Chrome OS EC CEC driver

 drivers/gpu/drm/i915/Kconfig                     |   1 +
 drivers/gpu/drm/i915/intel_display.h             |  20 ++
 drivers/gpu/drm/i915/intel_drv.h                 |   2 +
 drivers/gpu/drm/i915/intel_hdmi.c                |  13 +
 drivers/media/cec/cec-notifier.c                 |  11 +-
 drivers/media/platform/Kconfig                   |  11 +
 drivers/media/platform/Makefile                  |   2 +
 drivers/media/platform/cros-ec-cec/Makefile      |   1 +
 drivers/media/platform/cros-ec-cec/cros-ec-cec.c | 347 +++++++++++++++++++++++
 drivers/mfd/cros_ec_dev.c                        |  16 ++
 drivers/platform/chrome/cros_ec_proto.c          |  40 ++-
 include/linux/mfd/cros_ec.h                      |   2 +-
 include/linux/mfd/cros_ec_commands.h             |  80 ++++++
 include/media/cec-notifier.h                     |  27 +-
 14 files changed, 557 insertions(+), 16 deletions(-)
 create mode 100644 drivers/media/platform/cros-ec-cec/Makefile
 create mode 100644 drivers/media/platform/cros-ec-cec/cros-ec-cec.c

-- 
2.7.4

             reply	other threads:[~2018-05-18 13:05 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-18 13:04 Neil Armstrong [this message]
2018-05-18 13:05 ` [PATCH v2 1/5] media: cec-notifier: Get notifier by device and connector name Neil Armstrong
2018-05-18 15:48   ` Sean Paul
2018-05-21  8:53     ` Neil Armstrong
2018-05-18 13:05 ` [PATCH v2 2/5] drm/i915: hdmi: add CEC notifier to intel_hdmi Neil Armstrong
2018-05-18 13:24   ` Ville Syrjälä
2018-05-21  8:54     ` Neil Armstrong
2018-05-18 13:05 ` [PATCH v2 3/5] mfd: cros-ec: Introduce CEC commands and events definitions Neil Armstrong
2018-05-18 16:19   ` Enric Balletbo Serra
2018-05-21  9:00     ` Neil Armstrong
2018-05-24  5:47   ` Benson Leung
2018-05-24  8:36     ` Neil Armstrong
2018-05-18 13:05 ` [PATCH v2 4/5] mfd: cros_ec_dev: Add CEC sub-device registration Neil Armstrong
2018-05-18 13:41   ` Enric Balletbo Serra
2018-05-18 13:05 ` [PATCH v2 5/5] media: platform: Add Chrome OS EC CEC driver Neil Armstrong
2018-05-18 15:02   ` Enric Balletbo Serra
2018-05-21  9:01     ` Neil Armstrong
2018-05-18 14:04 ` [PATCH v2 0/5] Add ChromeOS EC CEC Support Enric Balletbo Serra
2018-05-21  9:02   ` Neil Armstrong
  -- strict thread matches above, loose matches on Subject: below --
2018-05-15 14:42 Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1526648704-16873-1-git-send-email-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=airlied@linux.ie \
    --cc=bleung@google.com \
    --cc=darekm@google.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=eballetbo@gmail.com \
    --cc=felixe@google.com \
    --cc=fparent@baylibre.com \
    --cc=hans.verkuil@cisco.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=marcheu@chromium.org \
    --cc=olof@lixom.net \
    --cc=sadolfsson@google.com \
    --cc=seanpaul@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox