[PATCH v4 23/34] media: camss: ispif: Add support for 8x96

[Todor Tomov <todor.tomov@linaro.org>]

ISPIF hardware modules on 8x16 and 8x96 are similar. However on
8x96 the ISPIF routes data to two VFE hardware modules. Add
separate interrupt handler for 8x96 to handle the additional
interrupts.

Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
---
 drivers/media/platform/qcom/camss/camss-ispif.c | 76 ++++++++++++++++++++++++-
 1 file changed, 73 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c
index 2c6c0d2..ae80732 100644
--- a/drivers/media/platform/qcom/camss/camss-ispif.c
+++ b/drivers/media/platform/qcom/camss/camss-ispif.c
@@ -116,13 +116,77 @@ static const u32 ispif_formats[] = {
 };
 
 /*
- * ispif_isr - ISPIF module interrupt handler
+ * ispif_isr_8x96 - ISPIF module interrupt handler for 8x96
  * @irq: Interrupt line
  * @dev: ISPIF device
  *
  * Return IRQ_HANDLED on success
  */
-static irqreturn_t ispif_isr(int irq, void *dev)
+static irqreturn_t ispif_isr_8x96(int irq, void *dev)
+{
+	struct ispif_device *ispif = dev;
+	u32 value0, value1, value2, value3, value4, value5;
+
+	value0 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_0(0));
+	value1 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_1(0));
+	value2 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_2(0));
+	value3 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_0(1));
+	value4 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_1(1));
+	value5 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_2(1));
+
+	writel_relaxed(value0, ispif->base + ISPIF_VFE_m_IRQ_CLEAR_0(0));
+	writel_relaxed(value1, ispif->base + ISPIF_VFE_m_IRQ_CLEAR_1(0));
+	writel_relaxed(value2, ispif->base + ISPIF_VFE_m_IRQ_CLEAR_2(0));
+	writel_relaxed(value3, ispif->base + ISPIF_VFE_m_IRQ_CLEAR_0(1));
+	writel_relaxed(value4, ispif->base + ISPIF_VFE_m_IRQ_CLEAR_1(1));
+	writel_relaxed(value5, ispif->base + ISPIF_VFE_m_IRQ_CLEAR_2(1));
+
+	writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
+
+	if ((value0 >> 27) & 0x1)
+		complete(&ispif->reset_complete);
+
+	if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
+		dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
+
+	if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_RDI0_OVERFLOW))
+		dev_err_ratelimited(to_device(ispif), "VFE0 rdi0 overflow\n");
+
+	if (unlikely(value1 & ISPIF_VFE_m_IRQ_STATUS_1_PIX1_OVERFLOW))
+		dev_err_ratelimited(to_device(ispif), "VFE0 pix1 overflow\n");
+
+	if (unlikely(value1 & ISPIF_VFE_m_IRQ_STATUS_1_RDI1_OVERFLOW))
+		dev_err_ratelimited(to_device(ispif), "VFE0 rdi1 overflow\n");
+
+	if (unlikely(value2 & ISPIF_VFE_m_IRQ_STATUS_2_RDI2_OVERFLOW))
+		dev_err_ratelimited(to_device(ispif), "VFE0 rdi2 overflow\n");
+
+	if (unlikely(value3 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
+		dev_err_ratelimited(to_device(ispif), "VFE1 pix0 overflow\n");
+
+	if (unlikely(value3 & ISPIF_VFE_m_IRQ_STATUS_0_RDI0_OVERFLOW))
+		dev_err_ratelimited(to_device(ispif), "VFE1 rdi0 overflow\n");
+
+	if (unlikely(value4 & ISPIF_VFE_m_IRQ_STATUS_1_PIX1_OVERFLOW))
+		dev_err_ratelimited(to_device(ispif), "VFE1 pix1 overflow\n");
+
+	if (unlikely(value4 & ISPIF_VFE_m_IRQ_STATUS_1_RDI1_OVERFLOW))
+		dev_err_ratelimited(to_device(ispif), "VFE1 rdi1 overflow\n");
+
+	if (unlikely(value5 & ISPIF_VFE_m_IRQ_STATUS_2_RDI2_OVERFLOW))
+		dev_err_ratelimited(to_device(ispif), "VFE1 rdi2 overflow\n");
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * ispif_isr_8x16 - ISPIF module interrupt handler for 8x16
+ * @irq: Interrupt line
+ * @dev: ISPIF device
+ *
+ * Return IRQ_HANDLED on success
+ */
+static irqreturn_t ispif_isr_8x16(int irq, void *dev)
 {
 	struct ispif_device *ispif = dev;
 	u32 value0, value1, value2;
@@ -959,8 +1023,14 @@ int msm_ispif_subdev_init(struct ispif_device *ispif,
 	ispif->irq = r->start;
 	snprintf(ispif->irq_name, sizeof(ispif->irq_name), "%s_%s",
 		 dev_name(dev), MSM_ISPIF_NAME);
-	ret = devm_request_irq(dev, ispif->irq, ispif_isr,
+	if (to_camss(ispif)->version == CAMSS_8x16)
+		ret = devm_request_irq(dev, ispif->irq, ispif_isr_8x16,
 			       IRQF_TRIGGER_RISING, ispif->irq_name, ispif);
+	else if (to_camss(ispif)->version == CAMSS_8x96)
+		ret = devm_request_irq(dev, ispif->irq, ispif_isr_8x96,
+			       IRQF_TRIGGER_RISING, ispif->irq_name, ispif);
+	else
+		ret = -EINVAL;
 	if (ret < 0) {
 		dev_err(dev, "request_irq failed: %d\n", ret);
 		return ret;
-- 
2.7.4