From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: linux-media@vger.kernel.org
Subject: Re: [PATCH 2/2] Print parser position on error
Date: Wed, 19 Jun 2013 02:39:48 +0200 [thread overview]
Message-ID: <15767957.U4axePOriY@avalon> (raw)
In-Reply-To: <2088324.Z7uO2ssh1O@avalon>
Hi Sascha,
On Monday 10 June 2013 15:56:01 Laurent Pinchart wrote:
> Hi Sascha,
>
> I'm sorry for the late reply.
>
> Great patch set, thank you. It's very helpful.
Should I got ahead and apply the patch with the proposed modifications below ?
> On Wednesday 08 May 2013 15:27:54 Sascha Hauer wrote:
> > Most parser functions take a **endp argument to indicate the caller
> > where parsing has stopped. This is currently only used after parsing
> > something successfully. This patch sets **endp to the erroneous
> > position in the error case and prints its position after an error
> > has occured.
> >
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >
> > src/mediactl.c | 48 +++++++++++++++++++++++++++++++++++++++++++++---
> > 1 file changed, 45 insertions(+), 3 deletions(-)
> >
> > diff --git a/src/mediactl.c b/src/mediactl.c
> > index c65de50..04ade15 100644
> > --- a/src/mediactl.c
> > +++ b/src/mediactl.c
> > @@ -40,6 +40,22 @@
> >
> > #include "mediactl.h"
> > #include "tools.h"
> >
> > +void media_print_streampos(struct media_device *media, const char *p,
> > const char *end)
>
> The function can be static.
>
> > +{
> > + int pos;
> > +
> > + pos = end - p + 1;
> > +
> > + if (pos < 0)
> > + pos = 0;
> > + if (pos > strlen(p))
> > + pos = strlen(p);
> > +
> > + media_dbg(media, "\n");
> > + media_dbg(media, " %s\n", p);
> > + media_dbg(media, " %*s\n", pos, "^");
> > +}
> > +
> >
> > struct media_pad *media_entity_remote_source(struct media_pad *pad)
> > {
> >
> > unsigned int i;
> >
> > @@ -538,12 +554,16 @@ struct media_pad *media_parse_pad(struct
> > media_device
> > *media, if (*p == '"') {
> >
> > for (end = (char *)p + 1; *end && *end != '"'; ++end);
> > if (*end != '"') {
> >
> > + if (endp)
> > + *endp = (char *)end;
>
> No need to cast to a char * here, end is already a char *.
>
> What would you think about adding
>
> + /* endp can be NULL. To avoid spreading NULL checks across the
> + * function, set endp to &end in that case.
> + */
> + if (endp == NULL)
> + endp = &end;
>
> at the beginning of the function and removing the endp NULL checks that are
> spread across the code below ?
>
> > media_dbg(media, "missing matching '\"'\n");
> > return NULL;
> >
> > }
> >
> > entity = media_get_entity_by_name(media, p + 1, end - p - 1);
> > if (entity == NULL) {
> >
> > + if (endp)
> > + *endp = (char *)p + 1;
> >
> > media_dbg(media, "no such entity \"%.*s\"\n", end - p - 1, p
+
>
> 1);
>
> > return NULL;
> >
> > }
> >
> > @@ -553,6 +573,8 @@ struct media_pad *media_parse_pad(struct media_device
> > *media, entity_id = strtoul(p, &end, 10);
> >
> > entity = media_get_entity_by_id(media, entity_id);
> > if (entity == NULL) {
> >
> > + if (endp)
> > + *endp = (char *)p;
> >
> > media_dbg(media, "no such entity %d\n", entity_id);
> > return NULL;
> >
> > }
> >
> > @@ -560,6 +582,8 @@ struct media_pad *media_parse_pad(struct media_device
> > *media, for (; isspace(*end); ++end);
> >
> > if (*end != ':') {
> >
> > + if (endp)
> > + *endp = end;
> >
> > media_dbg(media, "Expected ':'\n", *end);
> > return NULL;
> >
> > }
> >
> > @@ -569,6 +593,8 @@ struct media_pad *media_parse_pad(struct media_device
> > *media, pad = strtoul(p, &end, 10);
> >
> > if (pad >= entity->info.pads) {
> >
> > + if (endp)
> > + *endp = (char *)p;
> >
> > media_dbg(media, "No pad '%d' on entity \"%s\". Maximum pad
number is
> >
> > %d\n", pad, entity->info.name, entity->info.pads - 1);
> >
> > return NULL;
> >
> > @@ -591,10 +617,15 @@ struct media_link *media_parse_link(struct
> > media_device *media, char *end;
> >
> > source = media_parse_pad(media, p, &end);
> >
> > - if (source == NULL)
> > + if (source == NULL) {
> > + if (endp)
> > + *endp = end;
>
> The endp argument to media_parse_link() and media_parse_setup_link() is
> mandatory, there's no need to test it.
>
> If you're fine with those modifications there's no need to resubmit the
> code, I'll fix it while applying.
>
> > return NULL;
> >
> > + }
> >
> > if (end[0] != '-' || end[1] != '>') {
> >
> > + if (endp)
> > + *endp = end;
> >
> > media_dbg(media, "Expected '->'\n");
> > return NULL;
> >
> > }
> >
> > @@ -602,8 +633,11 @@ struct media_link *media_parse_link(struct
> > media_device *media, p = end + 2;
> >
> > sink = media_parse_pad(media, p, &end);
> >
> > - if (sink == NULL)
> > + if (sink == NULL) {
> > + if (endp)
> > + *endp = end;
> >
> > return NULL;
> >
> > + }
> >
> > *endp = end;
> >
> > @@ -629,6 +663,8 @@ int media_parse_setup_link(struct media_device *media,
> >
> > link = media_parse_link(media, p, &end);
> > if (link == NULL) {
> >
> > + if (endp)
> > + *endp = end;
> >
> > media_dbg(media,
> >
> > "%s: Unable to parse link\n", __func__);
> >
> > return -EINVAL;
> >
> > @@ -636,6 +672,8 @@ int media_parse_setup_link(struct media_device *media,
> >
> > p = end;
> > if (*p++ != '[') {
> >
> > + if (endp)
> > + *endp = (char *)p - 1;
> >
> > media_dbg(media, "Unable to parse link flags: expected '['.\n");
> > return -EINVAL;
> >
> > }
> >
> > @@ -643,6 +681,8 @@ int media_parse_setup_link(struct media_device *media,
> >
> > flags = strtoul(p, &end, 10);
> > for (p = end; isspace(*p); p++);
> > if (*p++ != ']') {
> >
> > + if (endp)
> > + *endp = (char *)p - 1;
> >
> > media_dbg(media, "Unable to parse link flags: expected ']'.\n");
> > return -EINVAL;
> >
> > }
> >
> > @@ -666,8 +706,10 @@ int media_parse_setup_links(struct media_device
> > *media, const char *p)
> >
> > do {
> >
> > ret = media_parse_setup_link(media, p, &end);
> >
> > - if (ret < 0)
> > + if (ret < 0) {
> > + media_print_streampos(media, p, end);
> >
> > return ret;
> >
> > + }
> >
> > p = end + 1;
> >
> > } while (*end == ',');
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2013-06-19 0:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-08 13:27 [PATCH] media-ctl error messages Sascha Hauer
2013-05-08 13:27 ` [PATCH 1/2] Print more detailed parse " Sascha Hauer
2013-05-08 13:32 ` Sascha Hauer
2013-05-08 13:27 ` [PATCH 2/2] Print parser position on error Sascha Hauer
2013-06-10 13:56 ` Laurent Pinchart
2013-06-19 0:39 ` Laurent Pinchart [this message]
2013-06-19 5:30 ` Sascha Hauer
2013-06-19 10:40 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15767957.U4axePOriY@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox