Re: [linux-dvb] no lock on 3/4 with cx24116

[Darron Broad <darron@kewl.org>]

In message <BLU126-W53DD1C6541585D37293AC1AF1F0@phx.gbl>, Steve Thro wrote:

lo

>> Ok. I just tested here:
>>=20
>>> szap-s2 -x -c ./channels.conf "BSkyB Discovery HD"
>> reading channels from file './channels.conf'
>> zapping to 975 'BSkyB Discovery HD':
>> delivery DVB-S2=2C modulation QPSK
>> sat 1=2C frequency 12324 MHz V=2C symbolrate 29500000=2C coderate 3/4=2C =
>rolloff 0.35
>> vpid 0x0202=2C apid 0x1fff=2C sid 0x0edb
>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>> status 1f | signal d200 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS=
>_LOCK
>>=20
>> it seems to work.
>
>There are some difference between your output and mine:
>yours:
>rolloff 0.35
>sid 0x0edb
>
>mine=3B
>rolloff auto
>sid 0x0000
>
>
>Could you post your channels.conf?

you can roll your own if you have a universal LNB ?

hg clone http://hg.kewl.org/xmldvb/

refer to the README file for setup and use. this util is only 3
days old so is mostly untested.

BTW, If you don't have universal LNB then please forward a patch :-)
I can e-mail my conf seperately in any case but it's not VDR ? is
that ok ?

cya

--

 // /
{:)==={ Darron Broad <darron@kewl.org>
 \\ \ 


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb