From: "Igor M. Liplianin" <liplianin@me.by>
To: Malcolm Priestley <tvboxspy@gmail.com>
Cc: linux-media@vger.kernel.org
Subject: [PATCH] [TEST] Regarding m88rc2000 i2c gate operation, SNR, BER and others
Date: Wed, 09 May 2012 04:54:49 -0700 (PDT) [thread overview]
Message-ID: <1682436.JdK20qceHM@useri> (raw)
[-- Attachment #1: Type: text/plain, Size: 400 bytes --]
Malcolm,
I made SNR, BER, UCB and signal level code for m88rc2000, but my cards show
them correctly only if I made changes in m88rs2000_tuner_read function.
Analyzing USB logs I found that register 0x81 never set to 0x85 value.
It is always set to 0x84 regardless of read or write operation to tuner.
I was wondering is this my hardware specific? Can you test you cards with
attached patch?
Igor
[-- Attachment #2: snrber.patch --]
[-- Type: text/x-patch, Size: 3012 bytes --]
diff --git a/drivers/media/dvb/frontends/m88rs2000.c b/drivers/media/dvb/frontends/m88rs2000.c
index f6d6e39..f5ece59 100644
--- a/drivers/media/dvb/frontends/m88rs2000.c
+++ b/drivers/media/dvb/frontends/m88rs2000.c
@@ -143,7 +143,7 @@ static u8 m88rs2000_demod_read(struct m88rs2000_state *state, u8 reg)
static u8 m88rs2000_tuner_read(struct m88rs2000_state *state, u8 reg)
{
- m88rs2000_demod_write(state, 0x81, 0x85);
+ m88rs2000_demod_write(state, 0x81, 0x84);
udelay(10);
return m88rs2000_readreg(state, 0, reg);
}
@@ -492,33 +492,81 @@ static int m88rs2000_read_status(struct dvb_frontend *fe, fe_status_t *status)
return 0;
}
-/* Extact code for these unknown but lmedm04 driver uses interupt callbacks */
-
static int m88rs2000_read_ber(struct dvb_frontend *fe, u32 *ber)
{
- deb_info("m88rs2000_read_ber %d\n", *ber);
- *ber = 0;
+ struct m88rs2000_state *state = fe->demodulator_priv;
+ u8 tmp0, tmp1;
+
+ m88rs2000_demod_write(state, 0x9a, 0x30);
+ tmp0 = m88rs2000_demod_read(state, 0xd8);
+ if ((tmp0 & 0x10) != 0) {
+ m88rs2000_demod_write(state, 0x9a, 0xb0);
+ *ber = 0xffffffff;
+ return 0;
+ }
+
+ *ber = (m88rs2000_demod_read(state, 0xd7) << 8) |
+ m88rs2000_demod_read(state, 0xd6);
+
+ tmp1 = m88rs2000_demod_read(state, 0xd9);
+ m88rs2000_demod_write(state, 0xd9, (tmp1 & ~7) | 4);
+ /* needs twice */
+ m88rs2000_demod_write(state, 0xd8, (tmp0 & ~8) | 0x30);
+ m88rs2000_demod_write(state, 0xd8, (tmp0 & ~8) | 0x30);
+ m88rs2000_demod_write(state, 0x9a, 0xb0);
+
return 0;
}
static int m88rs2000_read_signal_strength(struct dvb_frontend *fe,
- u16 *strength)
+ u16 *signal_strength)
{
- *strength = 0;
+ struct m88rs2000_state *state = fe->demodulator_priv;
+ u8 rfg, bbg, gain, strength;
+
+ rfg = m88rs2000_tuner_read(state, 0x3d) & 0x1f;
+ bbg = m88rs2000_tuner_read(state, 0x21) & 0x1f;
+ gain = rfg * 2 + bbg * 3;
+
+ if (gain > 80)
+ strength = 0;
+ else if (gain > 65)
+ strength = 4 * (80 - gain);
+ else if (gain > 50)
+ strength = 65 + 4 * (65 - gain) / 3;
+ else
+ strength = 85 + 2 * (50 - gain) / 3;
+
+ *signal_strength = strength * 655;
+
+ deb_info("%s: rfg, bbg / gain = %d, %d, %d\n",
+ __func__, rfg, bbg, gain);
+
return 0;
}
static int m88rs2000_read_snr(struct dvb_frontend *fe, u16 *snr)
{
- deb_info("m88rs2000_read_snr %d\n", *snr);
- *snr = 0;
+ struct m88rs2000_state *state = fe->demodulator_priv;
+
+ *snr = 512 * m88rs2000_demod_read(state, 0x65);
+
return 0;
}
static int m88rs2000_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
{
- deb_info("m88rs2000_read_ber %d\n", *ucblocks);
- *ucblocks = 0;
+ struct m88rs2000_state *state = fe->demodulator_priv;
+ u8 tmp;
+
+ *ucblocks = (m88rs2000_demod_read(state, 0xd5) << 8) |
+ m88rs2000_demod_read(state, 0xd4);
+ tmp = m88rs2000_demod_read(state, 0xd8);
+ m88rs2000_demod_write(state, 0xd8, tmp & ~0x20);
+ /* needs two times */
+ m88rs2000_demod_write(state, 0xd8, tmp | 0x20);
+ m88rs2000_demod_write(state, 0xd8, tmp | 0x20);
+
return 0;
}
next reply other threads:[~2012-05-09 11:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-09 11:54 Igor M. Liplianin [this message]
2012-05-09 21:02 ` [PATCH] [TEST] Regarding m88rc2000 i2c gate operation, SNR, BER and others Malcolm Priestley
2012-05-14 20:24 ` [PATCH] lmedm04 ver 2.00 - changes for " Malcolm Priestley
2012-07-01 10:16 ` [PATCH] [TEST] Regarding m88rs2000 " Malcolm Priestley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1682436.JdK20qceHM@useri \
--to=liplianin@me.by \
--cc=linux-media@vger.kernel.org \
--cc=tvboxspy@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).