From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Sakari Ailus <sakari.ailus@iki.fi>
Cc: linux-media@vger.kernel.org, hverkuil@xs4all.nl,
teturtia@gmail.com, dacohen@gmail.com, snjw23@gmail.com,
andriy.shevchenko@linux.intel.com, t.stanislaws@samsung.com,
tuukkat76@gmail.com, k.debski@gmail.com, riverful@gmail.com
Subject: Re: [PATCH v3 30/33] omap3isp: Add resizer data rate configuration to resizer_set_stream
Date: Wed, 22 Feb 2012 12:24:48 +0100 [thread overview]
Message-ID: <1709623.OrBLBvPVIp@avalon> (raw)
In-Reply-To: <1329703032-31314-30-git-send-email-sakari.ailus@iki.fi>
Hi Sakari,
Thanks for the patch.
On Monday 20 February 2012 03:57:09 Sakari Ailus wrote:
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> ---
> drivers/media/video/omap3isp/ispresizer.c | 4 ++++
> 1 files changed, 4 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/media/video/omap3isp/ispresizer.c
> b/drivers/media/video/omap3isp/ispresizer.c index 6ce2349..81e1bc4 100644
> --- a/drivers/media/video/omap3isp/ispresizer.c
> +++ b/drivers/media/video/omap3isp/ispresizer.c
> @@ -1147,9 +1147,13 @@ static int resizer_set_stream(struct v4l2_subdev *sd,
> int enable) struct device *dev = to_device(res);
>
> if (res->state == ISP_PIPELINE_STREAM_STOPPED) {
> + struct isp_pipeline *pipe = to_isp_pipeline(&sd->entity);
> +
> if (enable == ISP_PIPELINE_STREAM_STOPPED)
> return 0;
>
> + omap3isp_resizer_max_rate(res, &pipe->max_rate);
> +
> omap3isp_subclk_enable(isp, OMAP3_ISP_SUBCLK_RESIZER);
> resizer_configure(res);
> resizer_print_status(res);
What about moving this to link validation ?
Could you please also remove it from isp_video_validate_pipeline() in this
patch ? It would make review easier.
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2012-02-22 11:24 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-20 1:56 [PATCH v3 0/33] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 01/33] v4l: Introduce integer menu controls Sakari Ailus
2012-02-20 17:36 ` Sylwester Nawrocki
2012-02-20 1:56 ` [PATCH v3 02/33] v4l: Document " Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 03/33] vivi: Add an integer menu test control Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 04/33] v4l: VIDIOC_SUBDEV_S_SELECTION and VIDIOC_SUBDEV_G_SELECTION IOCTLs Sakari Ailus
2012-02-21 14:34 ` Laurent Pinchart
2012-02-23 5:49 ` Sakari Ailus
2012-02-21 16:15 ` Laurent Pinchart
2012-02-23 6:01 ` Sakari Ailus
2012-02-27 0:22 ` Laurent Pinchart
2012-02-27 0:57 ` Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 05/33] v4l: vdev_to_v4l2_subdev() should have return type "struct v4l2_subdev *" Sakari Ailus
2012-02-21 14:37 ` Laurent Pinchart
2012-02-20 1:56 ` [PATCH v3 06/33] v4l: Check pad number in get try pointer functions Sakari Ailus
2012-02-21 14:42 ` Laurent Pinchart
2012-02-23 5:57 ` Sakari Ailus
2012-02-27 0:33 ` Laurent Pinchart
2012-02-27 12:27 ` Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 07/33] v4l: Support s_crop and g_crop through s/g_selection Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 08/33] v4l: Add subdev selections documentation: svg and dia files Sakari Ailus
2012-02-21 15:00 ` Laurent Pinchart
2012-02-26 18:56 ` Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 09/33] v4l: Add subdev selections documentation Sakari Ailus
2012-02-21 16:41 ` Laurent Pinchart
2012-02-26 21:42 ` Sakari Ailus
2012-02-28 11:42 ` Laurent Pinchart
2012-03-02 12:24 ` Sakari Ailus
2012-03-02 17:54 ` Laurent Pinchart
2012-03-02 18:01 ` Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 10/33] v4l: Mark VIDIOC_SUBDEV_G_CROP and VIDIOC_SUBDEV_S_CROP obsolete Sakari Ailus
2012-02-21 16:42 ` Laurent Pinchart
2012-02-20 1:56 ` [PATCH v3 11/33] v4l: Image source control class Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 12/33] v4l: Image processing " Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 13/33] v4l: Document raw bayer 4CC codes Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 14/33] v4l: Add DPCM compressed formats Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 15/33] media: Add link_validate() op to check links to the sink pad Sakari Ailus
2012-02-22 10:05 ` Laurent Pinchart
2012-02-23 15:04 ` Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 16/33] v4l: Improve sub-device documentation for pad ops Sakari Ailus
2012-02-22 10:06 ` Laurent Pinchart
2012-02-20 1:56 ` [PATCH v3 17/33] v4l: Implement v4l2_subdev_link_validate() Sakari Ailus
2012-02-22 10:14 ` Laurent Pinchart
2012-02-23 16:07 ` Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 18/33] v4l: Allow changing control handler lock Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 19/33] omap3isp: Support additional in-memory compressed bayer formats Sakari Ailus
2012-02-20 1:56 ` [PATCH v3 20/33] omap3isp: Move definitions required by board code under include/media Sakari Ailus
2012-02-20 1:57 ` [PATCH v3 21/33] omap3: add definition for CONTROL_CAMERA_PHY_CTRL Sakari Ailus
2012-02-20 1:57 ` [PATCH v3 22/33] omap3isp: Assume media_entity_pipeline_start may fail Sakari Ailus
2012-02-22 10:48 ` Laurent Pinchart
2012-02-26 1:08 ` Sakari Ailus
2012-02-20 1:57 ` [PATCH v3 23/33] omap3isp: Add lane configuration to platform data Sakari Ailus
2012-02-20 1:57 ` [PATCH v3 24/33] omap3isp: Add information on external subdev to struct isp_pipeline Sakari Ailus
2012-02-20 1:57 ` [PATCH v3 25/33] omap3isp: Introduce omap3isp_get_external_info() Sakari Ailus
2012-02-22 10:55 ` Laurent Pinchart
2012-02-26 1:09 ` Sakari Ailus
2012-02-20 1:57 ` [PATCH v3 26/33] omap3isp: Default link validation for ccp2, csi2, preview and resizer Sakari Ailus
2012-02-22 11:01 ` Laurent Pinchart
2012-02-25 1:34 ` Sakari Ailus
2012-02-26 23:14 ` Laurent Pinchart
2012-02-26 23:40 ` Sakari Ailus
2012-02-20 1:57 ` [PATCH v3 27/33] omap3isp: Implement proper CCDC link validation, check pixel rate Sakari Ailus
2012-02-22 11:11 ` Laurent Pinchart
2012-02-25 1:42 ` Sakari Ailus
2012-02-20 1:57 ` [PATCH v3 28/33] omap3isp: Move setting constaints above media_entity_pipeline_start Sakari Ailus
2012-02-22 11:12 ` Laurent Pinchart
2012-02-25 1:46 ` Sakari Ailus
2012-02-20 1:57 ` [PATCH v3 29/33] omap3isp: Configure CSI-2 phy based on platform data Sakari Ailus
2012-02-22 11:21 ` Laurent Pinchart
2012-02-25 1:49 ` Sakari Ailus
2012-02-20 1:57 ` [PATCH v3 30/33] omap3isp: Add resizer data rate configuration to resizer_set_stream Sakari Ailus
2012-02-22 11:24 ` Laurent Pinchart [this message]
2012-02-26 1:10 ` Sakari Ailus
2012-02-20 1:57 ` [PATCH v3 31/33] omap3isp: Remove isp_validate_pipeline and other old stuff Sakari Ailus
2012-02-22 11:26 ` Laurent Pinchart
2012-02-25 1:52 ` Sakari Ailus
2012-02-20 1:57 ` [PATCH v3 32/33] smiapp: Add driver Sakari Ailus
2012-02-27 15:38 ` Laurent Pinchart
2012-02-29 5:41 ` Sakari Ailus
2012-02-29 9:35 ` Laurent Pinchart
2012-02-29 10:00 ` Sylwester Nawrocki
2012-03-01 14:01 ` Sakari Ailus
2012-03-01 14:56 ` Laurent Pinchart
2012-02-20 1:57 ` [PATCH v3 33/33] rm680: Add camera init Sakari Ailus
2012-02-27 1:06 ` Laurent Pinchart
2012-02-28 19:05 ` Sakari Ailus
2012-02-20 2:03 ` [PATCH v3 0/33] V4L2 subdev and sensor control changes, SMIA++ driver and N9 camera board code Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1709623.OrBLBvPVIp@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=dacohen@gmail.com \
--cc=hverkuil@xs4all.nl \
--cc=k.debski@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=riverful@gmail.com \
--cc=sakari.ailus@iki.fi \
--cc=snjw23@gmail.com \
--cc=t.stanislaws@samsung.com \
--cc=teturtia@gmail.com \
--cc=tuukkat76@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).