Re: [PATCH v2] adv7343: use devm_kzalloc() instead of kzalloc()

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Prabhakar,

Thank you for the patches.

For the whole set,

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

On Friday 04 January 2013 10:41:15 Lad, Prabhakar wrote:
> I2C drivers can use devm_kzalloc() too in their .probe() methods. Doing so
> simplifies their clean up paths.
> 
> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
> ---
>  Changes for v2:
>  1: Fixed comments pointed out by Laurent.
> 
>  drivers/media/i2c/adv7343.c |    9 +++------
>  1 files changed, 3 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv7343.c b/drivers/media/i2c/adv7343.c
> index 2b5aa67..432eb5f 100644
> --- a/drivers/media/i2c/adv7343.c
> +++ b/drivers/media/i2c/adv7343.c
> @@ -397,7 +397,8 @@ static int adv7343_probe(struct i2c_client *client,
>  	v4l_info(client, "chip found @ 0x%x (%s)\n",
>  			client->addr << 1, client->adapter->name);
> 
> -	state = kzalloc(sizeof(struct adv7343_state), GFP_KERNEL);
> +	state = devm_kzalloc(&client->dev, sizeof(struct adv7343_state),
> +			     GFP_KERNEL);
>  	if (state == NULL)
>  		return -ENOMEM;
> 
> @@ -431,16 +432,13 @@ static int adv7343_probe(struct i2c_client *client,
>  		int err = state->hdl.error;
> 
>  		v4l2_ctrl_handler_free(&state->hdl);
> -		kfree(state);
>  		return err;
>  	}
>  	v4l2_ctrl_handler_setup(&state->hdl);
> 
>  	err = adv7343_initialize(&state->sd);
> -	if (err) {
> +	if (err)
>  		v4l2_ctrl_handler_free(&state->hdl);
> -		kfree(state);
> -	}
>  	return err;
>  }
> 
> @@ -451,7 +449,6 @@ static int adv7343_remove(struct i2c_client *client)
> 
>  	v4l2_device_unregister_subdev(sd);
>  	v4l2_ctrl_handler_free(&state->hdl);
> -	kfree(state);
> 
>  	return 0;
>  }
-- 
Regards,

Laurent Pinchart