Re: [PATCH V2 3/4] dt-bindings: media: ti: vpe: Add bindings for Video Input Port

["Rob Herring (Arm)" <robh@kernel.org>]

On Wed, 16 Jul 2025 16:49:11 +0530, Yemike Abhilash Chandra wrote:
> From: Dale Farnsworth <dale@farnsworth.org>
> 
> Add device tree bindings for the Video Input Port. Video Input Port (VIP)
> can be found on devices such as DRA7xx and provides a parallel interface
> to a video source such as a sensor or TV decoder.
> 
> Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
> Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
> ---
> Changelog:
> Changes in v2:
> - Remove array and just use hsync: true in bindings
> - Remove array and use enum for bus width in bindings
> - Use pattern properties since properties across ports are same
> - Update copyright year
> 
>  .../devicetree/bindings/media/ti,vip.yaml     | 211 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 212 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/ti,vip.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/ti,vip.example.dtb: /example-0/vip@48970000: failed to match any schema with compatible: ['ti,dra7-vip1']
Documentation/devicetree/bindings/media/ti,vip.example.dtb: /example-0/i2c/camera@37: failed to match any schema with compatible: ['ovti,ov10633']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250716111912.235157-4-y-abhilashchandra@ti.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.