From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Igor Kugasyan <kugasyan@hotmail.com>
Cc: "todd.fischer@ridgerun.com" <todd.fischer@ridgerun.com>,
"clark.becker@ridgerun.com" <clark.becker@ridgerun.com>,
"linux-media@vger.kernel.org" <linux-media@vger.kernel.org>,
"g.liakhovetski@gmx.de" <g.liakhovetski@gmx.de>
Subject: Re: mt9v034 driver
Date: Sun, 28 Apr 2013 23:08:38 +0200 [thread overview]
Message-ID: <1762550.7mDg3VrWU9@avalon> (raw)
In-Reply-To: <DUB112-W1120C7E0BD196DF8764BA21D2B70@phx.gbl>
Hi Igor,
On Friday 26 April 2013 16:30:49 Igor Kugasyan wrote:
> Dear Sirs,
>
> I wrote a driver for the mt9v034 as Todd recommended (on basis of working
> mt9p031 and mt9v022), built kernel with this driver,
Note that a driver for the same sensor has already been posted, see
https://patchwork.linuxtv.org/patch/14907/.
> but faced with the
> problem:
> /dev # cat video0
> cat: can't open 'video0': No such device
>
> ----------------------------------------------------------------------------
> NAND
> Starting NAND Copy...
> Valid magicnum, 0xA1ACED66, found in block 0x00000019.
>
>
> U-Boot 2010.12-rc2 (Feb 07 2013 - 18:15:34)
>
> Cores: ARM 297 MHz
> DDR: 243 MHz
> I2C: ready
> DRAM: 128 MiB
> NAND: 256 MiB
> MMC: davinci: 0, davinci: 1
> Net: Ethernet PHY: GENERIC @ 0x00
> DaVinci-EMAC
> Hit any key to stop autoboot: 0
>
> Loading from nand0, offset 0x400000
> Image Name: "RR Linux Kernel"
> Created: 2013-04-26 11:03:27 UTC
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 4247104 Bytes = 4.1 MiB
> Load Address: 80008000
> Entry Point: 80008000
> Automatic boot of image at addr 0x82000000 ...
> ## Booting kernel from Legacy Image at 82000000 ...
> Image Name: "RR Linux Kernel"
> Created: 2013-04-26 11:03:27 UTC
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 4247104 Bytes = 4.1 MiB
> Load Address: 80008000
> Entry Point: 80008000
> Verifying Checksum ... OK
> Loading Kernel Image ... OK
> OK
>
> Starting kernel ...
>
> Linux version 2.6.32.17-davinci1 (root@ubuntu) (gcc version 4.3.3 (Sourcery
> G++ Lite 2009q1-203) ) #129 PREEMPT Fri Apr 26 14:02:08 EEST 2013
Not only is 2.6.32 from ancient times, I suppose it's the kernel provided with
the TI BSP. I don't think you will get any support for that here, you should
contact your TI support channel. We can only provide support for the mainline
kernel.
--
Regards,
Laurent Pinchart
next parent reply other threads:[~2013-04-28 21:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <DUB112-W1120C7E0BD196DF8764BA21D2B70@phx.gbl>
2013-04-28 21:08 ` Laurent Pinchart [this message]
[not found] <DUB112-W5AD3C17EE426206DFAEF9D2CE0@phx.gbl>
2013-04-17 14:15 ` mt9v034 driver Guennadi Liakhovetski
2013-04-18 14:05 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1762550.7mDg3VrWU9@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=clark.becker@ridgerun.com \
--cc=g.liakhovetski@gmx.de \
--cc=kugasyan@hotmail.com \
--cc=linux-media@vger.kernel.org \
--cc=todd.fischer@ridgerun.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).