Re: [PATCH] v4l: change path of video drivers

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Prabhakar,

Thanks for the patch.

On Friday 14 September 2012 14:47:52 Prabhakar Lad wrote:
> From: Lad, Prabhakar <prabhakar.lad@ti.com>
> 
> due to structure change for video drivers, change the
> description with correct path.
> 
> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
> Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
> Cc: Hans Verkuil <hans.verkuil@cisco.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Sakari Ailus <sakari.ailus@iki.fi>
> Cc: Rob Landley <rob@landley.net>

For the omap3isp part and the V4L2 core,

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  Documentation/video4linux/CQcam.txt           |    2 +-
>  Documentation/video4linux/README.davinci-vpbe |   20 ++++++++++----------
>  Documentation/video4linux/fimc.txt            |   16 ++++++++--------
>  Documentation/video4linux/omap3isp.txt        |    2 +-
>  Documentation/video4linux/v4l2-framework.txt  |    2 +-
>  Documentation/video4linux/videobuf            |    2 +-
>  6 files changed, 22 insertions(+), 22 deletions(-)
> 
> diff --git a/Documentation/video4linux/CQcam.txt
> b/Documentation/video4linux/CQcam.txt index 6e680fe..0b69e4e 100644
> --- a/Documentation/video4linux/CQcam.txt
> +++ b/Documentation/video4linux/CQcam.txt
> @@ -18,7 +18,7 @@ Table of Contents
> 
>  1.0 Introduction
> 
> -  The file ../../drivers/media/video/c-qcam.c is a device driver for
> +  The file ../../drivers/media/parport/c-qcam.c is a device driver for
>  the Logitech (nee Connectix) parallel port interface color CCD camera.
>  This is a fairly inexpensive device for capturing images.  Logitech
>  does not currently provide information for developers, but many people
> diff --git a/Documentation/video4linux/README.davinci-vpbe
> b/Documentation/video4linux/README.davinci-vpbe index 7a460b0..dc9a297
> 100644
> --- a/Documentation/video4linux/README.davinci-vpbe
> +++ b/Documentation/video4linux/README.davinci-vpbe
> @@ -5,22 +5,22 @@
>   File partitioning
>   -----------------
>   V4L2 display device driver
> -         drivers/media/video/davinci/vpbe_display.c
> -         drivers/media/video/davinci/vpbe_display.h
> +         drivers/media/platform/davinci/vpbe_display.c
> +         drivers/media/platform/davinci/vpbe_display.h
> 
>   VPBE display controller
> -         drivers/media/video/davinci/vpbe.c
> -         drivers/media/video/davinci/vpbe.h
> +         drivers/media/platform/davinci/vpbe.c
> +         drivers/media/platform/davinci/vpbe.h
> 
>   VPBE venc sub device driver
> -         drivers/media/video/davinci/vpbe_venc.c
> -         drivers/media/video/davinci/vpbe_venc.h
> -         drivers/media/video/davinci/vpbe_venc_regs.h
> +         drivers/media/platform/davinci/vpbe_venc.c
> +         drivers/media/platform/davinci/vpbe_venc.h
> +         drivers/media/platform/davinci/vpbe_venc_regs.h
> 
>   VPBE osd driver
> -         drivers/media/video/davinci/vpbe_osd.c
> -         drivers/media/video/davinci/vpbe_osd.h
> -         drivers/media/video/davinci/vpbe_osd_regs.h
> +         drivers/media/platform/davinci/vpbe_osd.c
> +         drivers/media/platform/davinci/vpbe_osd.h
> +         drivers/media/platform/davinci/vpbe_osd_regs.h
> 
>   Functional partitioning
>   -----------------------
> diff --git a/Documentation/video4linux/fimc.txt
> b/Documentation/video4linux/fimc.txt index eb04970..fd02d9a 100644
> --- a/Documentation/video4linux/fimc.txt
> +++ b/Documentation/video4linux/fimc.txt
> @@ -10,7 +10,7 @@ data from LCD controller (FIMD) through the SoC internal
> writeback data path.  There are multiple FIMC instances in the SoCs (up to
> 4), having slightly different capabilities, like pixel alignment
> constraints, rotator availability, LCD writeback support, etc. The driver
> is located at -drivers/media/video/s5p-fimc directory.
> +drivers/media/platform/s5p-fimc directory.
> 
>  1. Supported SoCs
>  =================
> @@ -36,21 +36,21 @@ Not currently supported:
>  =====================
> 
>  - media device driver
> -  drivers/media/video/s5p-fimc/fimc-mdevice.[ch]
> +  drivers/media/platform/s5p-fimc/fimc-mdevice.[ch]
> 
>   - camera capture video device driver
> -  drivers/media/video/s5p-fimc/fimc-capture.c
> +  drivers/media/platform/s5p-fimc/fimc-capture.c
> 
>   - MIPI-CSI2 receiver subdev
> -  drivers/media/video/s5p-fimc/mipi-csis.[ch]
> +  drivers/media/platform/s5p-fimc/mipi-csis.[ch]
> 
>   - video post-processor (mem-to-mem)
> -  drivers/media/video/s5p-fimc/fimc-core.c
> +  drivers/media/platform/s5p-fimc/fimc-core.c
> 
>   - common files
> -  drivers/media/video/s5p-fimc/fimc-core.h
> -  drivers/media/video/s5p-fimc/fimc-reg.h
> -  drivers/media/video/s5p-fimc/regs-fimc.h
> +  drivers/media/platform/s5p-fimc/fimc-core.h
> +  drivers/media/platform/s5p-fimc/fimc-reg.h
> +  drivers/media/platform/s5p-fimc/regs-fimc.h
> 
>  4. User space interfaces
>  ========================
> diff --git a/Documentation/video4linux/omap3isp.txt
> b/Documentation/video4linux/omap3isp.txt index 5dd1439..b9a9f83 100644
> --- a/Documentation/video4linux/omap3isp.txt
> +++ b/Documentation/video4linux/omap3isp.txt
> @@ -12,7 +12,7 @@ Introduction
>  ============
> 
>  This file documents the Texas Instruments OMAP 3 Image Signal Processor
> (ISP) -driver located under drivers/media/video/omap3isp. The original
> driver was +driver located under drivers/media/platform/omap3isp. The
> original driver was written by Texas Instruments but since that it has been
> rewritten (twice) at Nokia.
> 
> diff --git a/Documentation/video4linux/v4l2-framework.txt
> b/Documentation/video4linux/v4l2-framework.txt index 89318be..e7006ca
> 100644
> --- a/Documentation/video4linux/v4l2-framework.txt
> +++ b/Documentation/video4linux/v4l2-framework.txt
> @@ -1054,4 +1054,4 @@ The first event type in the class is reserved for
> future use, so the first available event type is 'class base + 1'.
> 
>  An example on how the V4L2 events may be used can be found in the OMAP
> -3 ISP driver (drivers/media/video/omap3isp).
> +3 ISP driver (drivers/media/platform/omap3isp).
> diff --git a/Documentation/video4linux/videobuf
> b/Documentation/video4linux/videobuf index 1d00d7f..3ffe9e9 100644
> --- a/Documentation/video4linux/videobuf
> +++ b/Documentation/video4linux/videobuf
> @@ -349,7 +349,7 @@ again.
>  Developers who are interested in more information can go into the relevant
>  header files; there are a few low-level functions declared there which have
> not been talked about here.  Also worthwhile is the vivi driver
> -(drivers/media/video/vivi.c), which is maintained as an example of how V4L2
> +(drivers/media/platform/vivi.c), which is maintained as an example of how
> V4L2 drivers should be written.  Vivi only uses the vmalloc() API, but it's
> good enough to get started with.  Note also that all of these calls are
> exported GPL-only, so they will not be available to non-GPL kernel modules.
-- 
Regards,

Laurent Pinchart