[linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700]

[linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700]

[Peter Meszmer]

Hello,

I'm watching this list for quite a while now, looking forward to see my 
Avermedia AVerTV DVB-S Hybrid+FM supported. 
This card looks very similar to the Avermedia AVerTV DVB-S Pro [A700], so I 
tried the two existing patches. Finally, Matthias Schwarzott's (zzam) 
patch "a700_full_20080204" did it. 

DVB-S is working very well using Kaffeine 0.8.5, input via S-Video or 
Composite worked, since I bought the card, and is still working.

Is it possible, to add the cards ID (1461:a7a2) to the list?

Thanks for all the work you did! Ich ziehe meinen Hut!

Best regards,
Peter Meszmer

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700]

[Eduard Huguet]

[-- Attachment #1.1: Type: text/plain, Size: 1467 bytes --]

>
> umpte:
> [linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700]
> De:
> Peter Meszmer <hubblest@web.de>
> Data:
> Thu, 7 Feb 2008 10:23:27 +0100
> Per a:
> linux-dvb@linuxtv.org
>
> Per a:
> linux-dvb@linuxtv.org
>
>
> Hello,
>
> I'm watching this list for quite a while now, looking forward to see my 
> Avermedia AVerTV DVB-S Hybrid+FM supported. 
> This card looks very similar to the Avermedia AVerTV DVB-S Pro [A700], so I 
> tried the two existing patches. Finally, Matthias Schwarzott's (zzam) 
> patch "a700_full_20080204" did it. 
>
> DVB-S is working very well using Kaffeine 0.8.5, input via S-Video or 
> Composite worked, since I bought the card, and is still working.
>
> Is it possible, to add the cards ID (1461:a7a2) to the list?
>
> Thanks for all the work you did! Ich ziehe meinen Hut!
>
> Best regards,
> Peter Meszmer
>   

Hi,
    ¿Have you been able to make the DVB-S part work, so? I've been 
trying these days using ZZam's patch only (Tino's one also mentioned in 
the wiki doesn't apply for now), and I was completely unable to get a 
lock on any frequency.

I thought it was because the driver was incomplete (without Tino's 
patch...), but if it works for you then I'll probably need to check my 
antenna, satellite, etc...

My card is the DVB-S Pro simple (not hybrid), but I don't think this 
makes any difference.

Best regards,
  Eduard Huguet


(PS: sorry for double posting. I forgot to change the subject  title 
before.)


[-- Attachment #1.2: Type: text/html, Size: 2954 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700]

[Peter Meszmer]

Am Donnerstag, 7. Februar 2008 schrieb Eduard Huguet:
> Hi,
>     ¿Have you been able to make the DVB-S part work, so? I've been
> trying these days using ZZam's patch only (Tino's one also mentioned in
> the wiki doesn't apply for now), and I was completely unable to get a
> lock on any frequency.
>
> I thought it was because the driver was incomplete (without Tino's
> patch...), but if it works for you then I'll probably need to check my
> antenna, satellite, etc...
>
> My card is the DVB-S Pro simple (not hybrid), but I don't think this
> makes any difference.
>
> Best regards,
>   Eduard Huguet
>
>
> (PS: sorry for double posting. I forgot to change the subject  title
> before.)

Hello,

yes, DVB-S is working. I'm sitting here in Germany, using Astra 19.2E and 
Hotbird 13.0E. Scanning is possible with Kaffeine and scan (dvbscan on my 
Gentoo-box from media-tv/linuxtv-dvb-apps). So you should check your 
equipment. :)

Als far as I know, you can either use Tino's or ZZam's patch.

Best regards,
Peter Meszmer

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700]

[Matthias Schwarzott]

On Donnerstag, 7. Februar 2008, Eduard Huguet wrote:
> Hi,
>     ¿Have you been able to make the DVB-S part work, so? I've been
> trying these days using ZZam's patch only (Tino's one also mentioned in
> the wiki doesn't apply for now), and I was completely unable to get a
> lock on any frequency.
>
> I thought it was because the driver was incomplete (without Tino's
> patch...), but if it works for you then I'll probably need to check my
> antenna, satellite, etc...
>
> My card is the DVB-S Pro simple (not hybrid), but I don't think this
> makes any difference.
>
> Best regards,
>   Eduard Huguet
>
>
> (PS: sorry for double posting. I forgot to change the subject  title
> before.)

Hi Eduard, Peter!

@Eduard:
Can you please compare the dmesg output (especially the eeprom dump) of your 
card to the one listed on the wiki-page.

http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_DVB-S_Pro_(A700)

@Peter:
1. Maybe you want to start a page in the wiki dedicated to your card.
Or should we check for similarity and merge both of these cards into one page?

At least I am interested in the eeprom content of your card.

I should request some schematics from Avermedia to maybe get gpio controlling 
correct. (Like resetting chips, ir ...)

Regards
Matthias

-- 
Matthias Schwarzott (zzam)

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700]

[Eduard Huguet]

[-- Attachment #1.1: Type: text/plain, Size: 2841 bytes --]

Hi, Matthias
   Both lspci and dmesg EEPROM dump are exactly the same as the wiki.

Anyway, let's go with some feedback:

    I've been trying the card with your patch. Apparently the adaptor 
nodes are created (I solved yet the ordering issue), but I've been 
unable to find any channel by using neither dvbscan nor Kaffeine. In 
dvbscan I get these errors:

    eduard@mediacenter ~ $ dvbscan -a 2 /usr/share/dvb/dvb-s/Astra-19.2E

    scanning /usr/share/dvb/dvb-s/Astra-19.2E
    using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0'
    initial transponder 12551500 V 22000000 5
     >>> tune to: 12551:v:0:22000
    DVB-S IF freq is 1951500
    WARNING: >>> tuning failed!!!
     >>> tune to: 12551:v:0:22000 (tuning failed)
    DVB-S IF freq is 1951500
    WARNING: >>> tuning failed!!!
    ERROR: initial tuning failed
    dumping lists (0 services)
    Done.


In Kaffeine I can also see (during scan) that the signal level is 
aproximately at 14% and SNR at 51-52%, but it doesn't find any channel. 
Theoretically I'm getting the DVB-S signal through my main house 
antennae cable (I double checked this with the installer), as the dishes 
are on the top of the building and pointed to Astra 19.2, but I don't 
know if maybe it's giving me a signal too slow for the card. ¿Do you 
know if there is any amplifier in the card that needs activation (Nova-T 
500 does)?

Best regards, and thank you again for your hard work.
  Eduard







En/na Matthias Schwarzott ha escrit:
> On Donnerstag, 7. Februar 2008, Eduard Huguet wrote:
>   
>> Hi,
>>     ¿Have you been able to make the DVB-S part work, so? I've been
>> trying these days using ZZam's patch only (Tino's one also mentioned in
>> the wiki doesn't apply for now), and I was completely unable to get a
>> lock on any frequency.
>>
>> I thought it was because the driver was incomplete (without Tino's
>> patch...), but if it works for you then I'll probably need to check my
>> antenna, satellite, etc...
>>
>> My card is the DVB-S Pro simple (not hybrid), but I don't think this
>> makes any difference.
>>
>> Best regards,
>>   Eduard Huguet
>>
>>
>> (PS: sorry for double posting. I forgot to change the subject  title
>> before.)
>>     
>
> Hi Eduard, Peter!
>
> @Eduard:
> Can you please compare the dmesg output (especially the eeprom dump) of your 
> card to the one listed on the wiki-page.
>
> http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_DVB-S_Pro_(A700)
>
> @Peter:
> 1. Maybe you want to start a page in the wiki dedicated to your card.
> Or should we check for similarity and merge both of these cards into one page?
>
> At least I am interested in the eeprom content of your card.
>
> I should request some schematics from Avermedia to maybe get gpio controlling 
> correct. (Like resetting chips, ir ...)
>
> Regards
> Matthias
>
>   

[-- Attachment #1.2: Type: text/html, Size: 3570 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700]

[Peter Meszmer]

Am Donnerstag, 7. Februar 2008 schrieben Sie:
> @Peter:
> 1. Maybe you want to start a page in the wiki dedicated to your card.
> Or should we check for similarity and merge both of these cards into one
> page?
>
> At least I am interested in the eeprom content of your card.
>
> I should request some schematics from Avermedia to maybe get gpio
> controlling correct. (Like resetting chips, ir ...)
>
> Regards
> Matthias

Hello Matthias,

the eeprom content is slightly different form the one shown on the wiki:

saa7133[0]: found at 0000:02:07.0, rev: 209, irq: 18, latency: 64, mmio: 
0xd3024000
saa7133[0]: subsystem: 1461:a7a2, board: Avermedia A700 
[card=132,autodetected]
saa7133[0]: board init: gpio is 48a00
saa7133[0]: i2c eeprom 00: 61 14 a2 a7 ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: 00 01 81 af d7 09 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
DVB: registering new adapter (saa7133[0])

Writing a page in the wiki sounds interesting, but I think, I shouldn't start 
this project. So I would prefer to merge the information of both cards.

Best regards
Peter Meszmer

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700]

[Matthias Schwarzott]

On Thursday 07 February 2008, you wrote:
> Am Donnerstag, 7. Februar 2008 schrieben Sie:
> > @Peter:
> > 1. Maybe you want to start a page in the wiki dedicated to your card.
> > Or should we check for similarity and merge both of these cards into one
> > page?
> >
> > At least I am interested in the eeprom content of your card.
> >
> > I should request some schematics from Avermedia to maybe get gpio
> > controlling correct. (Like resetting chips, ir ...)
> >
> > Regards
> > Matthias
>
> Hello Matthias,
>
> the eeprom content is slightly different form the one shown on the wiki:
>
> saa7133[0]: found at 0000:02:07.0, rev: 209, irq: 18, latency: 64, mmio:
> 0xd3024000
> saa7133[0]: subsystem: 1461:a7a2, board: Avermedia A700
> [card=132,autodetected]
> saa7133[0]: board init: gpio is 48a00
> saa7133[0]: i2c eeprom 00: 61 14 a2 a7 ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom e0: 00 01 81 af d7 09 ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: registered device video0 [v4l2]
> saa7133[0]: registered device vbi0
> DVB: registering new adapter (saa7133[0])
>
I added this to the wiki-page about A700:
http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_DVB-S_Pro_(A700)

Maybe we should rename the page to AverMedia_AverTV_DVB-S_A700 or anything 
similar.

* Could you load saa7134 module of unpatched driver, but with parameter 
i2c_scan=1.
* lspci -vvnn also should be interesting
* If you have a camera, could you do a picture, so we can get info about the 
used analog tuner. I guess it is some XC30??. But to get it running you 
should contact video4linux mailinglist.


Regards
Matthias

-- 
Matthias Schwarzott (zzam)

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700]

[Peter Meszmer]

Am Dienstag, 12. Februar 2008 schrieben Sie:
> I added this to the wiki-page about A700:
> http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_DVB-S_Pro_(A700)
>
> Maybe we should rename the page to AverMedia_AverTV_DVB-S_A700 or anything
> similar.
>
> * Could you load saa7134 module of unpatched driver, but with parameter
> i2c_scan=1.
> * lspci -vvnn also should be interesting
> * If you have a camera, could you do a picture, so we can get info about
> the used analog tuner. I guess it is some XC30??. But to get it running you
> should contact video4linux mailinglist.
>
>
> Regards
> Matthias


Hello Matthias,

if I load the saa7134 module of unpatched driver, but with parameter 
i2c_scan=1, dmesg shows (Kernel 2.6.24-gentoo-r2)

saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:02:07.0, rev: 209, irq: 18, latency: 64, mmio: 
0xd3024000
saa7133[0]: subsystem: 1461:a7a2, board: UNKNOWN/GENERIC [card=0,autodetected]
saa7133[0]: board init: gpio is 6da00
saa7133[0]: i2c eeprom 00: 61 14 a2 a7 ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c scan: found device @ 0x1c  [???]
saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0

and lspci -vvnn returns

02:07.0 Multimedia controller [0480]: Philips Semiconductors SAA7133/SAA7135 
Video Broadcast Decoder [1131:7133] (rev d1)
        Subsystem: Avermedia Technologies Inc Unknown device [1461:a7a2]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (63750ns min, 63750ns max)
        Interrupt: pin A Route to IRQ 18
        Region 0: Memory at d3024000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=3 PME-
        Kernel driver in use: saa7134
        Kernel modules: saa7134

I did some pictures too... the link to them is in a PM for you. The analog 
tuner seems to be a XC2028, but I don't see any possibilities to test the 
tuner.

Regards
Peter

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700]

[Matthias Schwarzott]

On Mittwoch, 13. Februar 2008, Peter Meszmer wrote:
> Am Dienstag, 12. Februar 2008 schrieben Sie:
> > I added this to the wiki-page about A700:
> > http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_DVB-S_Pro_(A700)
> >
> > Maybe we should rename the page to AverMedia_AverTV_DVB-S_A700 or
> > anything similar.
> >
> > * Could you load saa7134 module of unpatched driver, but with parameter
> > i2c_scan=1.
> > * lspci -vvnn also should be interesting
> > * If you have a camera, could you do a picture, so we can get info about
> > the used analog tuner. I guess it is some XC30??. But to get it running
> > you should contact video4linux mailinglist.
> >
> >
> > Regards
> > Matthias
>
> Hello Matthias,
>
> if I load the saa7134 module of unpatched driver, but with parameter
> i2c_scan=1, dmesg shows (Kernel 2.6.24-gentoo-r2)
>
> saa7130/34: v4l2 driver version 0.2.14 loaded
> saa7133[0]: found at 0000:02:07.0, rev: 209, irq: 18, latency: 64, mmio:
> 0xd3024000
> saa7133[0]: subsystem: 1461:a7a2, board: UNKNOWN/GENERIC
> [card=0,autodetected] saa7133[0]: board init: gpio is 6da00
> saa7133[0]: i2c eeprom 00: 61 14 a2 a7 ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c scan: found device @ 0x1c  [???]
> saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
> saa7133[0]: registered device video0 [v4l2]
> saa7133[0]: registered device vbi0
>
> and lspci -vvnn returns
>
> 02:07.0 Multimedia controller [0480]: Philips Semiconductors
> SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
>         Subsystem: Avermedia Technologies Inc Unknown device [1461:a7a2]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 64 (63750ns min, 63750ns max)
>         Interrupt: pin A Route to IRQ 18
>         Region 0: Memory at d3024000 (32-bit, non-prefetchable) [size=2K]
>         Capabilities: [40] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=3 PME-
>         Kernel driver in use: saa7134
>         Kernel modules: saa7134
>
> I did some pictures too... the link to them is in a PM for you. The analog
> tuner seems to be a XC2028, but I don't see any possibilities to test the
> tuner.
>
added these texts to wiki.

Regards
Matthias

-- 
Matthias Schwarzott (zzam)

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700]

[Matthias Schwarzott]

On Donnerstag, 7. Februar 2008, Peter Meszmer wrote:
> Hello,
>
> I'm watching this list for quite a while now, looking forward to see my
> Avermedia AVerTV DVB-S Hybrid+FM supported.
> This card looks very similar to the Avermedia AVerTV DVB-S Pro [A700], so I
> tried the two existing patches. Finally, Matthias Schwarzott's (zzam)
> patch "a700_full_20080204" did it.
>
> DVB-S is working very well using Kaffeine 0.8.5, input via S-Video or
> Composite worked, since I bought the card, and is still working.
>
> Is it possible, to add the cards ID (1461:a7a2) to the list?
>
I uploaded a new patch that has this pci id added to the list.

Regards
Matthias

-- 
Matthias Schwarzott (zzam)

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb