From: Matthias Schwarzott <zzam@gentoo.org>
To: Peter Meszmer <hubblest@web.de>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700]
Date: Tue, 12 Feb 2008 22:06:29 +0100 [thread overview]
Message-ID: <200802122206.30369.zzam@gentoo.org> (raw)
In-Reply-To: <200802072219.40759.hubblest@web.de>
On Thursday 07 February 2008, you wrote:
> Am Donnerstag, 7. Februar 2008 schrieben Sie:
> > @Peter:
> > 1. Maybe you want to start a page in the wiki dedicated to your card.
> > Or should we check for similarity and merge both of these cards into one
> > page?
> >
> > At least I am interested in the eeprom content of your card.
> >
> > I should request some schematics from Avermedia to maybe get gpio
> > controlling correct. (Like resetting chips, ir ...)
> >
> > Regards
> > Matthias
>
> Hello Matthias,
>
> the eeprom content is slightly different form the one shown on the wiki:
>
> saa7133[0]: found at 0000:02:07.0, rev: 209, irq: 18, latency: 64, mmio:
> 0xd3024000
> saa7133[0]: subsystem: 1461:a7a2, board: Avermedia A700
> [card=132,autodetected]
> saa7133[0]: board init: gpio is 48a00
> saa7133[0]: i2c eeprom 00: 61 14 a2 a7 ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom e0: 00 01 81 af d7 09 ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: registered device video0 [v4l2]
> saa7133[0]: registered device vbi0
> DVB: registering new adapter (saa7133[0])
>
I added this to the wiki-page about A700:
http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_DVB-S_Pro_(A700)
Maybe we should rename the page to AverMedia_AverTV_DVB-S_A700 or anything
similar.
* Could you load saa7134 module of unpatched driver, but with parameter
i2c_scan=1.
* lspci -vvnn also should be interesting
* If you have a camera, could you do a picture, so we can get info about the
used analog tuner. I guess it is some XC30??. But to get it running you
should contact video4linux mailinglist.
Regards
Matthias
--
Matthias Schwarzott (zzam)
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-02-12 21:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-07 15:23 [linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700] Eduard Huguet
2008-02-07 16:47 ` Peter Meszmer
2008-02-07 19:13 ` Matthias Schwarzott
2008-02-07 20:12 ` Eduard Huguet
2008-02-07 21:19 ` Peter Meszmer
2008-02-12 21:06 ` Matthias Schwarzott [this message]
2008-02-13 10:05 ` Peter Meszmer
2008-02-13 12:59 ` Matthias Schwarzott
-- strict thread matches above, loose matches on Subject: below --
2008-02-07 9:23 Peter Meszmer
2008-02-13 18:17 ` Matthias Schwarzott
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200802122206.30369.zzam@gentoo.org \
--to=zzam@gentoo.org \
--cc=hubblest@web.de \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox