From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from moutng.kundenserver.de ([212.227.126.183]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1JfR4o-0001Rx-BV for linux-dvb@linuxtv.org; Sat, 29 Mar 2008 03:45:54 +0100 Date: Sat, 29 Mar 2008 03:41:54 +0100 From: "L." To: linux-dvb Message-ID: <20080329024154.GA23883@localhost> MIME-Version: 1.0 Content-Disposition: inline Subject: [linux-dvb] Analog capture (saa7113) not working on KNC1 DVB-C Plus (MK3) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Hello, with a KNC One "TV-Station DVB-C Plus" PCI card (MK3 - Philips SAA7146 with CU1216L/A I G H-3 Tunerbox with TDA10023) equipped with composite and s-video inputs ('Plus' version, Philips SAA7113), analog capture is not working. Most recent kernel sources I tested were 2.6.25-rc7. DVB-C television works fine with this card using 'budget_av' kernel module (from kernel 2.6.20 on, using e9hack's tda1002x patch, and later with mainstream kernel sources alone), but when opening an analog input, there are no data coming. A black screen is shown with 'xawtv' application. Xawtv correctly shows up the two video sources this card provides: 'S-Video' and 'Composite'. I checked the cables and video sources, they work fine with another card with analog input. I can do tests or compile something if you want me to. Information from lspci, dmesg and lsmod please see below. Help to get analog capture working is appreciated very much. Thank you L. 'lspci -nn' and 'lspci -vv' show: 00:14.0 Multimedia controller [0480]: Philips Semiconductors SAA7146 [1131:7146] (rev 01) 00:14.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: KNC One Unknown device 0023 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Link [LNKB] -> GSI 7 (level, low) -> IRQ 7 saa7146: found saa7146 @ mem de984000 (revision 1, irq 7) (0x1894,0x0023). saa7146 (0): dma buffer size 192512 DVB: registering new adapter (KNC1 DVB-C Plus MK3). adapter failed MAC signature check encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff saa7146_vv: saa7146 (0): registered device video0 [v4l2] KNC1-0: MAC addr = [...] DVB: registering frontend 0 (Philips TDA10023 DVB-C)... budget-av: ci interface initialised. [...] 'lsmod' shows: [...] tda10023 6500 1 budget_av 20000 1 dvb_pll 14308 1 budget_av saa7146_vv 48672 2 budget_av video_buf 24388 1 saa7146_vv videodev 27104 2 saa7146_vv v4l2_common 24096 2 saa7146_vv,videodev v4l1_compat 14340 2 saa7146_vv,videodev firmware_class 9568 2 pcmcia,budget_av budget_core 10980 1 budget_av dvb_core 78024 2 budget_av,budget_core saa7146 18408 3 budget_av,saa7146_vv,budget_core ttpci_eeprom 2368 1 budget_core [...] _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb