From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m3SIVYlf014318 for ; Mon, 28 Apr 2008 14:31:34 -0400 Received: from smtp2a.orange.fr (smtp2a.orange.fr [80.12.242.139]) by mx3.redhat.com (8.13.8/8.13.8) with ESMTP id m3SIU60V008722 for ; Mon, 28 Apr 2008 14:30:27 -0400 Received: from me-wanadoo.net (localhost [127.0.0.1]) by mwinf2a14.orange.fr (SMTP Server) with ESMTP id 9C44B70000AC for ; Mon, 28 Apr 2008 20:30:00 +0200 (CEST) Received: from ishwara.mahashakti.org (ADijon-258-1-135-43.w90-26.abo.wanadoo.fr [90.26.142.43]) by mwinf2a14.orange.fr (SMTP Server) with ESMTP id 33B2570000A7 for ; Mon, 28 Apr 2008 20:30:00 +0200 (CEST) Date: Mon, 28 Apr 2008 20:29:59 +0200 From: mahakali To: video4linux-list@redhat.com Message-ID: <20080428182959.GA21773@orange.fr> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Subject: Card Asus P7131 hybrid > no signal List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: Hello ! I installed last week an Asus TV-Card P7131 Hybrid , I followed the installation procedure described on an Ubuntu website. On boot I get following messages : saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c scan: found device @ 0x10 [???] saa7133[0]: i2c scan: found device @ 0x96 [???] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] tuner 1-004b: chip found @ 0x96 (saa7133[0]) tda8290 1-004b: setting tuner address to 61 tuner 1-004b: type set to tda8290+75a tda8290 1-004b: setting tuner address to 61 tuner 1-004b: type set to tda8290+75a saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1f.5 to 64 DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock w83627hf: Found W83627THF chip at 0x290 w83627hf w83627hf.656: Reading VID from GPIO5 i2c /dev entries driver tda1004x: found firmware revision 20 -- ok saa7134 ALSA driver for DMA sound loaded saa7133[0]/alsa: saa7133[0] at 0xfeaff000 irq 19 registered as card -1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. skge eth0: enabling interface skge eth0: Link is up at 100 Mbps, full duplex, flow control both ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip6_tables: (C) 2000-2006 Netfilter Core Team saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0200000 [Radio] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] NET: Registered protocol family 10 lo: Disabled Privacy Extensions nvidia: module license 'NVIDIA' taints kernel. NVRM: loading NVIDIA UNIX x86 Kernel Module 173.08 Tue Apr 1 23:46:53 PST 2008 NVRM: not using NVAGP, an AGPGART backend is loaded! hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdc: drive_cmd: error=0x04 { AbortedCommand } ide: failed opcode was: 0xef saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] eth0: no IPv6 routers present saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7134 ALSA driver for DMA sound unloaded Linux video capture interface: v2.00 saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:02:0b.0, rev: 209, irq: 19, latency: 64, mmio: 0xfeaff000 saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Hybrid [card=112,insmod option] saa7133[0]: board init: gpio is 0 saa7133[0]: gpio: mode=0x0000000 in=0x0000000 out=0x0000000 [pre-init] input: saa7134 IR (ASUSTeK P7131 Hybri as /class/input/input6 tuner 1-004b: chip found @ 0x96 (saa7133[0]) tda8290 1-004b: setting tuner address to 61 tuner 1-004b: type set to tda8290+75a tda8290 1-004b: setting tuner address to 61 tuner 1-004b: type set to tda8290+75a saa7133[0]:i2ceeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b292 saa7133[0]:i2ceeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ffff saa7133[0]:i2ceeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ffff saa7133[0]:i2ceeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff saa7133[0]:i2ceeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ffff saa7133[0]:i2ceeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff saa7133[0]:i2ceeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff saa7133[0]:i2ceeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff saa7133[0]: i2c scan: found device @ 0x10 [???] saa7133[0]: i2c scan: found device @ 0x96 [???] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision 20 -- ok saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0200000 [Radio] saa7134 ALSA driver for DMA sound loaded saa7133[0]/alsa: saa7133[0] at 0xfeaff000 irq 19 registered as card -1 saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]/alsa: saa7133[0] at 0xfeaff000 irq 19 registered as card -1 saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] saa7133[0]: gpio: mode=0x0200000 in=0x0000000 out=0x0000000 [Television] I think, it is O.K or ??? I use tvtime, I launch it but I get following message : No signal .... I try to find some channels, but i can find no one. If I use tvtime-scanner, he finds some channels, puts theme in a channel list, but I have no image, cannot watch TV .... I tried following command : >>> tune to: >>> 570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE >>> (tuning failed) So my question is .... How can I make this card work ??? Thanks for your patience and help mahakali -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list