From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m3UFxYUt024883 for ; Wed, 30 Apr 2008 11:59:34 -0400 Received: from smtp2b.orange.fr (smtp2b.orange.fr [80.12.242.145]) by mx3.redhat.com (8.13.8/8.13.8) with ESMTP id m3UFwvh7012371 for ; Wed, 30 Apr 2008 11:58:58 -0400 Date: Wed, 30 Apr 2008 17:58:51 +0200 From: mahakali To: hermann pitton Message-ID: <20080430155851.GA5818@orange.fr> References: <20080428182959.GA21773@orange.fr> <20080429192149.GB10635@orange.fr> <1209507302.3456.83.camel@pc10.localdom.local> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <1209507302.3456.83.camel@pc10.localdom.local> Cc: video4linux-list@redhat.com Subject: Re: Card Asus P7131 hybrid > no signal List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: On Wed, Apr 30, 2008 at 12:15:02AM +0200, hermann pitton wrote : > > > > > > The problem is: No picture .... I thinkk, if you > > have no signal, it is pretty normal. > > > > What are the options you pass to the saa7134 module ? > > I mean card= tuner= > > I have card=112 tuner=61 (auto detect). > > In one Saa7134-hardware how-to the autor gives > > following values : card=78 tuner=54. > > > > Any help would be great. > > > > mahakali > > > > > > Hello, > > if you have card=112 tuner=61 auto detected something goes very wrong. > > On any recent "official" code the card should be auto detected as > card=112, tuner=54, which is the tda8290 analog IF demodulator within > the saa7131e and behind its i2c gate is a tda8275ac1 at address 0x61 > which is correct in your logs. > > Hopefully you are only confusing tuner address 61 with tuner type, > auto detection should be OK then. > module saa7134 is now loading with following parameters : card=112 tuner=54 i2c_scan=1 secam=L > Analog TV is on the upper antenna connector (cable TV) and you need a > saa7134 insmod option "secam=L" in France. ("modinfo saa7134") > On La Corse may still be some "secam=Lc" broadcast, not sure about that. I don't have any upper or lower connector , only right and link. °right connector is described as RF-FM and link as CAT-TV > DVB-T (numerique) is on the lower antenna connector where also is > radio/FM. > > We have many reports that there often is an positive offset of about > 166000Hz needed in France, which you don't seem to use on your digital > tuning attempt. If this is needed and missing, the tda10046 will fail. > You might try to add it. > > Download dvb-apps from linuxtv.org mercurial and check if there is an > updated initial scan file for your region in scan/dvb-t. Nothing new. > example with offset: > > # Paris - France - various DVB-T transmitters > # contributed by Alexis de Lattre < > > # Paris - Tour Eiffel : 21 24 27 29 32 35 > # Paris Est - Chennevières : 35 51 54 57 60 63 > # Paris Nord - Sannois : 35 51 54 57 60 63 > # Paris Sud - Villebon : 35 51 56 57 60 63 > # T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy > T 474166000 8MHz 2/3 NONE QAM64 8k 1/32 NONE > T 498166000 8MHz 2/3 NONE QAM64 8k 1/32 NONE > T 522166000 8MHz 2/3 NONE QAM64 8k 1/32 NONE > T 538166000 8MHz 2/3 NONE QAM64 8k 1/32 NONE > T 562166000 8MHz 2/3 NONE QAM64 8k 1/32 NONE > T 586166000 8MHz 3/4 NONE QAM64 8k 1/8 NONE > T 714166000 8MHz 2/3 NONE QAM64 8k 1/32 NONE > T 738166000 8MHz 2/3 NONE QAM64 8k 1/32 NONE > T 754166000 8MHz 2/3 NONE QAM64 8k 1/32 NONE > T 762166000 8MHz 2/3 NONE QAM64 8k 1/32 NONE > T 786166000 8MHz 2/3 NONE QAM64 8k 1/32 NONE > T 810166000 8MHz 2/3 NONE QAM64 8k 1/32 NONE > Itried it now with fr_Auxerre + offset #### Auxerre - Molesmes #### #R1 T 570166000 8MHz AUTO NONE QAM64 8k AUTO NONE #R2 T 794166000 8MHz AUTO NONE QAM64 8k AUTO NONE #R3 T 770166000 8MHz AUTO NONE QAM64 8k AUTO NONE #R4 T 546166000 8MHz AUTO NONE QAM64 8k AUTO NONE #R5 T 586166000 8MHz AUTO NONE QAM64 8k AUTO NONE #R6 T 562166000 8MHz AUTO NONE QAM64 8k AUTO NONE but scanning fails ..... > You can also try to "scan" on a known frequency and bandwidth and set > the rest to AUTO AUTO ... or get "wscan" or try with "kaffeine". I tried it with kaffeine = no result I tried it with me-tv : me-tv Me TV-Message: 30.04.2008 17:37:26 - Me TV Version: 0.5.17 Me TV-Message: 30.04.2008 17:37:27 - Chargement du fichier glade '/usr/share/me-tv/glade/me-tv.glade' en cours Me TV-Message: 30.04.2008 17:37:52 - Création du GEP dans '/home/claude/.me-tv/epg.xml' Me TV-Message: 30.04.2008 17:37:52 - GEP chargé initial transponder 570166000 0 9 9 3 1 4 0 initial transponder 794166000 0 9 9 3 1 4 0 initial transponder 770166000 0 9 9 3 1 4 0 initial transponder 546166000 0 9 9 3 1 4 0 initial transponder 586166000 0 9 9 3 1 4 0 initial transponder 562166000 0 9 9 3 1 4 0 >>> tune to: WARNING: >>> tuning failed!!! >>> tune to: (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: WARNING: >>> tuning failed!!! >>> tune to: (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: WARNING: >>> tuning failed!!! >>> tune to: (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: WARNING: >>> tuning failed!!! >>> tune to: (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: WARNING: >>> tuning failed!!! >>> tune to: (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: WARNING: >>> tuning failed!!! >>> tune to: (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) > You might also try to increase the tuning timeout. > > Good Luck, > > Hermann Any idea ?? Thanks mahakali PS : I was asking myself , perhaps is something wrong with the connection, I had to put together cable and plug, so perhaps a bad electrical transmission (??) but as I already said tvtime is dectecting some channels but no image -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list