From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m415wqoW026614 for ; Thu, 1 May 2008 01:58:52 -0400 Received: from smtp2b.orange.fr (smtp2b.orange.fr [80.12.242.145]) by mx3.redhat.com (8.13.8/8.13.8) with ESMTP id m415wcjj015782 for ; Thu, 1 May 2008 01:58:39 -0400 Date: Thu, 1 May 2008 07:58:31 +0200 From: mahakali To: hermann pitton Message-ID: <20080501055831.GA6321@orange.fr> References: <20080428182959.GA21773@orange.fr> <20080429192149.GB10635@orange.fr> <1209507302.3456.83.camel@pc10.localdom.local> <20080430155851.GA5818@orange.fr> <1209592608.31036.36.camel@pc10.localdom.local> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <1209592608.31036.36.camel@pc10.localdom.local> Cc: video4linux-list@redhat.com, Mauro Carvalho Chehab Subject: Re: Card Asus P7131 hybrid > no signal List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: On Wed, Apr 30, 2008 at 11:56:48PM +0200, hermann pitton wrote : > Hi, > > Am Mittwoch, den 30.04.2008, 17:58 +0200 schrieb mahakali: > > On Wed, Apr 30, 2008 at 12:15:02AM +0200, hermann pitton wrote : > > > > > > > Hello, > > > > > > if you have card=112 tuner=61 auto detected something goes very wrong. > > > > > > On any recent "official" code the card should be auto detected as > > > card=112, tuner=54, which is the tda8290 analog IF demodulator within > > > the saa7131e and behind its i2c gate is a tda8275ac1 at address 0x61 > > > which is correct in your logs. > > > > > > Hopefully you are only confusing tuner address 61 with tuner type, > > > auto detection should be OK then. > > > > > module saa7134 is now loading with following parameters : > > > > card=112 tuner=54 i2c_scan=1 secam=L > > > > > Analog TV is on the upper antenna connector (cable TV) and you need a > > > saa7134 insmod option "secam=L" in France. ("modinfo saa7134") > > > On La Corse may still be some "secam=Lc" broadcast, not sure about that. > > > I don't have any upper or lower connector , only right and link. > > °right connector is described as RF-FM and link as CAT-TV > > That's OK. I read somewhere you have to inverse the connectors, so for analog TV you plug in the CAT-TV connector (?) > > > DVB-T (numerique) is on the lower antenna connector where also is > > > radio/FM. > > > > > > We have many reports that there often is an positive offset of about > > > 166000Hz needed in France, which you don't seem to use on your digital > > > tuning attempt. If this is needed and missing, the tda10046 will fail. > > > You might try to add it. > > > > > > Download dvb-apps from linuxtv.org mercurial and check if there is an > > > updated initial scan file for your region in scan/dvb-t. > > > > Nothing new. > > Itried it now with fr_Auxerre + offset > > #### Auxerre - Molesmes #### > > #R1 > > T 570166000 8MHz AUTO NONE QAM64 8k AUTO NONE > > #R2 > > T 794166000 8MHz AUTO NONE QAM64 8k AUTO NONE > > #R3 > > T 770166000 8MHz AUTO NONE QAM64 8k AUTO NONE > > #R4 > > T 546166000 8MHz AUTO NONE QAM64 8k AUTO NONE > > #R5 > > T 586166000 8MHz AUTO NONE QAM64 8k AUTO NONE > > #R6 > > T 562166000 8MHz AUTO NONE QAM64 8k AUTO NONE > > > > but scanning fails ..... > > > > > You can also try to "scan" on a known frequency and bandwidth and set > > > the rest to AUTO AUTO ... or get "wscan" or try with "kaffeine". What do you mean by "the rest" ? Could you give an example line ?? > > Any idea ?? > > Not much more. Maybe some other value is wrong, which other digital > demods tolerate. That was that with try AUTO there, except for frequency > and bandwidth. > > > > > Thanks > > > > mahakali > > > > PS : > > I was asking myself , perhaps is something wrong with the connection, I > > had to put together cable and plug, so perhaps a bad electrical > > transmission (??) but as I already said tvtime is dectecting some > > channels but no image > > > > I'm not aware of issues for DVB-T. There was trouble for such boards > with LNA recently on devel stuff, but as far as I know it did not make > it out to a kernel. > > We have definitely issues on analog, but I can't test SECAM_L. So I was fixed till now with analog, I could give digital a chance. Where I am living we get TNT, so digital TV In the card package I got a little black antenna, do I need other stuff to get it working ? And how to do it? > > After ioctl2 conversion, the apps don't let the user select specific > subnorms like PAL_I, PAL_BG, PAL_DK and SECAM_L, SECAM_DK, SECAM_Lc > anymore. > > What one can only select is visible here. > http://linuxtv.org/hg/v4l-dvb/rev/aa554a86b38a Code is at this time to complex for me. > > Thanks for all ... mahakali -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list