Re: [linux-dvb] [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus

Re: [linux-dvb] [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus

[Gregoire Favre]

[-- Attachment #1: Type: text/plain, Size: 997 bytes --]

On Fri, May 02, 2008 at 06:12:53PM +0200, Lars Bläser wrote:

> > Have you replaced linux/include/linux/compiler.h with the one from your
> > kernel ? (in multiproto_plus dir) if that's going to be included, this
> > shouldn't be in of course.
> 
> your patch included the compiler.h, after replacing it with the right
> one the drivers are build
> your patch also created a .config.old in v4l and the cx88 modules are
> not build (the .config created during make does only contain inaktive
> lines for cx88 modules), i modified the .config manual and started make
> again

OK, here's one without compiler.h and without .config.old (by the way, I
don't understand why make distclean didn't remove it...).

Good new, such way the patch is even smaller, so it would be really good
to have it included finally into the repo :-)

Any objection to the inclusion ?
-- 
Grégoire FAVRE  http://gregoire.favre.googlepages.com  http://www.gnupg.org
               http://picasaweb.google.com/Gregoire.Favre

[-- Attachment #2: Add full HVR-4000 support into multiproto_plus --]
[-- Type: application/octet-stream, Size: 16904 bytes --]

[-- Attachment #3: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus

[Igor]

> > > Have you replaced linux/include/linux/compiler.h with the one from your
> > > kernel ? (in multiproto_plus dir) if that's going to be included, this
> > > shouldn't be in of course.
> > 
> > your patch included the compiler.h, after replacing it with the right
> > one the drivers are build
> > your patch also created a .config.old in v4l and the cx88 modules are
> > not build (the .config created during make does only contain inaktive
> > lines for cx88 modules), i modified the .config manual and started make
> > again
> 
> OK, here's one without compiler.h and without .config.old (by the way, I
> don't understand why make distclean didn't remove it...).
> 
> Good new, such way the patch is even smaller, so it would be really good
> to have it included finally into the repo :-)
> 
> Any objection to the inclusion ?

with this patch I have the error

May  3 22:42:15 localhost vdr: [3471] ERROR (dvbdevice.c,302): Invalid argument

when I try to tune on dvb-s2 channels on VDR

But with HVR-4000-multiproto_plus-2008-04-25.diff + "HVR-4000-multiproto_plus-2008-04-25_inversion" is OK for me

Igor








_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus

[Igor]

sorry, I was wrong 

with the latest cumulative hvr4000-patch from Gregoire 
HVR-4000-multiproto_plus-2008-05-02.diff.bz2
I can tune on dvb-s2 channels on my VDR 170

this patch is OK for me

@Gregoire
thank you very much

Igor


-----Original Message-----
From: Igor <goga777@bk.ru>
To: VDR Mailing List <vdr@linuxtv.org>
Date: Sat, 03 May 2008 22:51:26 +0400
Subject: Re: [linux-dvb][vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus

> 
> > > > Have you replaced linux/include/linux/compiler.h with the one from your
> > > > kernel ? (in multiproto_plus dir) if that's going to be included, this
> > > > shouldn't be in of course.
> > > 
> > > your patch included the compiler.h, after replacing it with the right
> > > one the drivers are build
> > > your patch also created a .config.old in v4l and the cx88 modules are
> > > not build (the .config created during make does only contain inaktive
> > > lines for cx88 modules), i modified the .config manual and started make
> > > again
> > 
> > OK, here's one without compiler.h and without .config.old (by the way, I
> > don't understand why make distclean didn't remove it...).
> > 
> > Good new, such way the patch is even smaller, so it would be really good
> > to have it included finally into the repo :-)
> > 
> > Any objection to the inclusion ?
> 
> with this patch I have the error
> 
> May  3 22:42:15 localhost vdr: [3471] ERROR (dvbdevice.c,302): Invalid argument
> 
> when I try to tune on dvb-s2 channels on VDR
> 
> But with HVR-4000-multiproto_plus-2008-04-25.diff + "HVR-4000-multiproto_plus-2008-04-25_inversion" is OK for me


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb