From: jochen s <bumkunjo@gmx.de>
To: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
Date: Tue, 20 May 2008 13:21:49 +0200 [thread overview]
Message-ID: <200805201321.49598.bumkunjo@gmx.de> (raw)
In-Reply-To: <1210721429.14631.5.camel@media1>
I tried to use the xc-test branch with this card and loading the driver with
option card=5 looks good:
468.353850] cx23885 driver version 0.0.1 loaded
[ 468.354084] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 468.354213] CORE cx23885[0]: subsystem: 18ac:db78, board: DViCO FusionHDTV
DVB-T Dual Express [card=5,insmod option]
[ 468.402021] input: i2c IR (FusionHDTV) as /class/input/input6
[ 468.402153] ir-kbd-i2c: i2c IR (FusionHDTV) detected at i2c-2/2-006b/ir0
[cx23885[0]]
[ 468.402157] cx23885[0]: i2c bus 0 registered
[ 468.402814] cx23885[0]: i2c bus 1 registered
[ 468.402950] cx23885[0]: i2c bus 2 registered
[ 468.424684] cx23885[0]: cx23885 based dvb card
[ 468.427525] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 468.427625] DVB: registering new adapter (cx23885[0])
[ 468.427723] DVB: registering frontend 1 (Zarlink ZL10353 DVB-T)...
[ 468.428072] cx23885[0]: cx23885 based dvb card
[ 468.430856] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[ 468.430954] DVB: registering new adapter (cx23885[0])
[ 468.431051] DVB: registering frontend 2 (Zarlink ZL10353 DVB-T)...
[ 468.431383] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency:
0, mmio: 0xfd600000
[ 468.431392] PCI: Setting latency timer of device 0000:02:00.0 to 64
but when tuning to a channel via VDR it does not work - i got STR 0% SNR 0%
and immediately after changing to the card my system load goes up and I got
the following messages (continuing):
[ 590.342432] xc2028 2-0061: Loading 3 firmware images from
xc3028-dvico-au-01.fw, type: DViCO DualDig4/Nano2 (Australia), ver 2.7
[ 590.344845] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 590.838414] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 592.654769] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 593.522195] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 595.363939] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 595.927471] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
then syslog is full of these messages - so I assume something went wrong -
seems like the firmware doesn't match or loading the firmware fails in a way?
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-05-20 11:21 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-13 8:57 [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be stev391
2008-05-13 23:30 ` allan k
2008-05-20 11:21 ` jochen s [this message]
2008-05-13 23:37 ` allan k
-- strict thread matches above, loose matches on Subject: below --
2008-05-14 0:30 stev391
2008-05-13 23:55 stev391
2008-05-14 0:11 ` allan k
2008-05-13 23:52 stev391
2008-05-14 0:14 ` allan k
2008-05-10 8:14 stev391
2008-05-13 7:21 ` allan k
2008-05-13 8:19 ` allan k
2008-05-13 11:22 ` allan k
2008-05-08 10:02 sonofzev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200805201321.49598.bumkunjo@gmx.de \
--to=bumkunjo@gmx.de \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox