From: Mailrobot <spam@mrplanlos.de>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Fwd: Terratec Cinergy USB XE Rev.2
Date: Wed, 25 Jun 2008 09:29:28 +0200 [thread overview]
Message-ID: <200806250929.28930.spam@mrplanlos.de> (raw)
Hello,
I sadly bought this USB DVB-T stick and thought it would be supported by the
v4l drivers (I didn't know, that there are 2 versions), and now I can't get
it working.
My system is a 32 bit opensuse 11.0 (2.6.25.5-1.1-pae, gcc-4.3-39.1) and I
tried to compile the driver the following ways.
1. the suse delivered kernel module
--> nothing happened, only registered as usb device
2. I tried the download from your website, v4l-dvb-49ea64868f0c
--> compiled fine (make && make install), but wehn I plug my usb stick I get
this output:
af9015: af9015_read_config: tuner id:133 not supported, please report!
3. I tried to fix the "known" problem like sandyabutt described here:
http://www.linuxtv.org/wiki/index.php/User:Sandybutt
so I donwloaded the "original" driver, copied my kernel delivered dvb files
(*.c *.h) and pathed it with his pathfile. Make and make install worked fine,
but I still get this message:
af9015: af9015_read_config: tuner id:133 not supported, please report!
4. So, my next step was to try the driver from anttip
http://linuxtv.org/hg/~anttip/af9015. Same procedure with make and make
install, but still I can't get it working.
This is the whole message in dmesg and /var/log/messages:
Jun 25 09:13:44 simon kernel: usb 2-6.1: new high speed USB device using
ehci_hcd and address 6
Jun 25 09:13:44 simon kernel: usb 2-6.1: configuration #1 chosen from 1 choice
Jun 25 09:13:44 simon kernel: af9015_usb_probe: interface:0
Jun 25 09:13:44 simon kernel: af9015_read_config: IR mode:0
Jun 25 09:13:44 simon kernel: af9015_read_config: TS mode:0
Jun 25 09:13:44 simon kernel: af9015_read_config: [0] xtal:2 set
adc_clock:28000
Jun 25 09:13:44 simon kernel: af9015_read_config: [0] IF1:36167
Jun 25 09:13:44 simon kernel: af9015_read_config: [0] MT2060 IF1:1220
Jun 25 09:13:44 simon kernel: af9015: af9015_read_config: tuner id:133 not
supported, please report!
Jun 25 09:13:44 simon kernel: usb 2-6.1: New USB device found, idVendor=0ccd,
idProduct=0069
Jun 25 09:13:44 simon kernel: usb 2-6.1: New USB device strings: Mfr=1,
Product=2, SerialNumber=3
Jun 25 09:13:44 simon kernel: usb 2-6.1: Product: Cinergy T USB XE Ver.2
Jun 25 09:13:44 simon kernel: usb 2-6.1: Manufacturer: TerraTec
Jun 25 09:13:44 simon kernel: usb 2-6.1: SerialNumber: 10012007
Jun 25 09:13:44 simon kernel: dvb_af901x: disagrees about version of symbol
dvb_usb_device_init
Jun 25 09:13:44 simon kernel: dvb_af901x: Unknown symbol dvb_usb_device_init
simon:/home/user/downloads # lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046a:0101 Cherry GmbH
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 006: ID 0ccd:0069 TerraTec Electronic GmbH Cinergy T XE DVB-T
Receiver
Bus 002 Device 003: ID 058f:6254 Alcor Micro Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
simon:/home/user/downloads # lsmod |grep dvb
dvb_usb_af9015 35616 0
dvb_usb 39180 1 dvb_usb_af9015
dvb_core 96744 1 dvb_usb
firmware_class 25984 2 microcode,dvb_usb
i2c_core 41108 4 dvb_usb_af9015,dvb_usb,i2c_i801,nvidia
usbcore 164684 6
dvb_usb_af9015,dvb_usb,usbhid,ehci_hcd,uhci_hcd
I'm still not successfull and I know that some users got this stick working,
but I can't find the solution.
Is there anybody out there who could help me?
-------------------------------------------------------
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-06-25 7:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-25 7:29 Mailrobot [this message]
2008-06-25 8:33 ` [linux-dvb] Fwd: Terratec Cinergy USB XE Rev.2 Antti Palosaari
2008-06-25 9:24 ` Andy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200806250929.28930.spam@mrplanlos.de \
--to=spam@mrplanlos.de \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox