diff -r ffa9a0c644b3 linux/drivers/media/dvb/dvb-core/dvb_frontend.c
--- a/linux/drivers/media/dvb/dvb-core/dvb_frontend.c	Mon Sep 08 11:07:06 2008 -0400
+++ b/linux/drivers/media/dvb/dvb-core/dvb_frontend.c	Thu Sep 11 15:47:25 2008 +0100
@@ -216,8 +216,9 @@ static int dvb_frontend_get_event(struct
 
 static void dvb_frontend_init(struct dvb_frontend *fe)
 {
-	dprintk ("DVB: initialising frontend %i (%s)...\n",
+	dprintk ("DVB: initialising adapter %i frontend %i (%s)...\n",
 		 fe->dvb->num,
+		 fe->id,
 		 fe->ops.info.name);
 
 	if (fe->ops.init)
@@ -696,7 +697,7 @@ static int dvb_frontend_start(struct dvb
 	mb();
 
 	fe_thread = kthread_run(dvb_frontend_thread, fe,
-		"kdvb-fe-%i", fe->dvb->num);
+		"kdvb-ad-%i-fe-%i", fe->dvb->num,fe->id);
 	if (IS_ERR(fe_thread)) {
 		ret = PTR_ERR(fe_thread);
 		printk("dvb_frontend_start: failed to start kthread (%d)\n", ret);
@@ -720,8 +721,8 @@ static void dvb_frontend_get_frequeny_li
 		*freq_max = min(fe->ops.info.frequency_max, fe->ops.tuner_ops.info.frequency_max);
 
 	if (*freq_min == 0 || *freq_max == 0)
-		printk(KERN_WARNING "DVB: frontend %u frequency limits undefined - fix the driver\n",
-		       fe->dvb->num);
+		printk(KERN_WARNING "DVB: adapter %i frontend %u frequency limits undefined - fix the driver\n",
+		       fe->dvb->num,fe->id);
 }
 
 static int dvb_frontend_check_parameters(struct dvb_frontend *fe,
@@ -734,8 +735,8 @@ static int dvb_frontend_check_parameters
 	dvb_frontend_get_frequeny_limits(fe, &freq_min, &freq_max);
 	if ((freq_min && parms->frequency < freq_min) ||
 	    (freq_max && parms->frequency > freq_max)) {
-		printk(KERN_WARNING "DVB: frontend %u frequency %u out of range (%u..%u)\n",
-		       fe->dvb->num, parms->frequency, freq_min, freq_max);
+		printk(KERN_WARNING "DVB: adapter %i frontend %i frequency %u out of range (%u..%u)\n",
+		       fe->dvb->num, fe->id, parms->frequency, freq_min, freq_max);
 		return -EINVAL;
 	}
 
@@ -745,8 +746,8 @@ static int dvb_frontend_check_parameters
 		     parms->u.qpsk.symbol_rate < fe->ops.info.symbol_rate_min) ||
 		    (fe->ops.info.symbol_rate_max &&
 		     parms->u.qpsk.symbol_rate > fe->ops.info.symbol_rate_max)) {
-			printk(KERN_WARNING "DVB: frontend %u symbol rate %u out of range (%u..%u)\n",
-			       fe->dvb->num, parms->u.qpsk.symbol_rate,
+			printk(KERN_WARNING "DVB: adapter %i frontend %i symbol rate %u out of range (%u..%u)\n",
+			       fe->dvb->num, fe->id, parms->u.qpsk.symbol_rate,
 			       fe->ops.info.symbol_rate_min, fe->ops.info.symbol_rate_max);
 			return -EINVAL;
 		}
@@ -756,8 +757,8 @@ static int dvb_frontend_check_parameters
 		     parms->u.qam.symbol_rate < fe->ops.info.symbol_rate_min) ||
 		    (fe->ops.info.symbol_rate_max &&
 		     parms->u.qam.symbol_rate > fe->ops.info.symbol_rate_max)) {
-			printk(KERN_WARNING "DVB: frontend %u symbol rate %u out of range (%u..%u)\n",
-			       fe->dvb->num, parms->u.qam.symbol_rate,
+			printk(KERN_WARNING "DVB: adapter %i frontend %i symbol rate %u out of range (%u..%u)\n",
+			       fe->dvb->num, fe->id, parms->u.qam.symbol_rate,
 			       fe->ops.info.symbol_rate_min, fe->ops.info.symbol_rate_max);
 			return -EINVAL;
 		}
@@ -1775,8 +1776,9 @@ int dvb_register_frontend(struct dvb_ada
 	fe->dvb = dvb;
 	fepriv->inversion = INVERSION_OFF;
 
-	printk ("DVB: registering frontend %i (%s)...\n",
+	printk ("DVB: registering adapter %i frontend %i (%s)...\n",
 		fe->dvb->num,
+		fe->id,
 		fe->ops.info.name);
 
 	dvb_register_device (fe->dvb, &fepriv->dvbdev, &dvbdev_template,
diff -r ffa9a0c644b3 linux/drivers/media/dvb/dvb-core/dvb_frontend.h
--- a/linux/drivers/media/dvb/dvb-core/dvb_frontend.h	Mon Sep 08 11:07:06 2008 -0400
+++ b/linux/drivers/media/dvb/dvb-core/dvb_frontend.h	Thu Sep 11 15:47:25 2008 +0100
@@ -234,6 +234,7 @@ struct dvb_frontend {
 	void *sec_priv;
 	void *analog_demod_priv;
 	struct tv_frontend_properties tv_property_cache;
+	int id;
 };
 
 extern int dvb_register_frontend(struct dvb_adapter *dvb,
diff -r ffa9a0c644b3 linux/drivers/media/video/cx23885/cx23885-dvb.c
--- a/linux/drivers/media/video/cx23885/cx23885-dvb.c	Mon Sep 08 11:07:06 2008 -0400
+++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c	Thu Sep 11 15:47:25 2008 +0100
@@ -315,48 +315,53 @@ static int dvb_register(struct cx23885_t
 {
 	struct cx23885_dev *dev = port->dev;
 	struct cx23885_i2c *i2c_bus = NULL;
+	struct videobuf_dvb_frontend *fe0;
+
+	fe0 = videobuf_dvb_get_frontend(&port->frontends, 0);
+	if (!fe0)
+		return -EINVAL;
 
 	/* init struct videobuf_dvb */
-	port->dvb.name = dev->name;
+	fe0->dvb.name = dev->name;
 
 	/* init frontend */
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 		i2c_bus = &dev->i2c_bus[0];
-		port->dvb.frontend = dvb_attach(s5h1409_attach,
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 						&hauppauge_generic_config,
 						&i2c_bus->i2c_adap);
-		if (port->dvb.frontend != NULL) {
-			dvb_attach(mt2131_attach, port->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(mt2131_attach, fe0->dvb.frontend,
 				   &i2c_bus->i2c_adap,
 				   &hauppauge_generic_tunerconfig, 0);
 		}
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1800:
 		i2c_bus = &dev->i2c_bus[0];
-		switch (alt_tuner) {
+		switch (alt_tuner) { // XXXXXX multifrontend?
 		case 1:
-			port->dvb.frontend =
+			fe0->dvb.frontend =
 				dvb_attach(s5h1409_attach,
 					   &hauppauge_ezqam_config,
 					   &i2c_bus->i2c_adap);
-			if (port->dvb.frontend != NULL) {
-				dvb_attach(tda829x_attach, port->dvb.frontend,
+			if (fe0->dvb.frontend != NULL) {
+				dvb_attach(tda829x_attach, fe0->dvb.frontend,
 					   &dev->i2c_bus[1].i2c_adap, 0x42,
 					   &tda829x_no_probe);
-				dvb_attach(tda18271_attach, port->dvb.frontend,
+				dvb_attach(tda18271_attach, fe0->dvb.frontend,
 					   0x60, &dev->i2c_bus[1].i2c_adap,
 					   &hauppauge_tda18271_config);
 			}
 			break;
 		case 0:
 		default:
-			port->dvb.frontend =
+			fe0->dvb.frontend =
 				dvb_attach(s5h1409_attach,
 					   &hauppauge_generic_config,
 					   &i2c_bus->i2c_adap);
-			if (port->dvb.frontend != NULL)
-				dvb_attach(mt2131_attach, port->dvb.frontend,
+			if (fe0->dvb.frontend != NULL)
+				dvb_attach(mt2131_attach, fe0->dvb.frontend,
 					   &i2c_bus->i2c_adap,
 					   &hauppauge_generic_tunerconfig, 0);
 			break;
@@ -364,47 +369,47 @@ static int dvb_register(struct cx23885_t
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
 		i2c_bus = &dev->i2c_bus[0];
-		port->dvb.frontend = dvb_attach(s5h1409_attach,
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 						&hauppauge_hvr1800lp_config,
 						&i2c_bus->i2c_adap);
-		if (port->dvb.frontend != NULL) {
-			dvb_attach(mt2131_attach, port->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(mt2131_attach, fe0->dvb.frontend,
 				   &i2c_bus->i2c_adap,
 				   &hauppauge_generic_tunerconfig, 0);
 		}
 		break;
 	case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
 		i2c_bus = &dev->i2c_bus[0];
-		port->dvb.frontend = dvb_attach(lgdt330x_attach,
+		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
 						&fusionhdtv_5_express,
 						&i2c_bus->i2c_adap);
-		if (port->dvb.frontend != NULL) {
-			dvb_attach(simple_tuner_attach, port->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
 				   &i2c_bus->i2c_adap, 0x61,
 				   TUNER_LG_TDVS_H06XF);
 		}
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 		i2c_bus = &dev->i2c_bus[1];
-		port->dvb.frontend = dvb_attach(s5h1409_attach,
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 						&hauppauge_hvr1500q_config,
 						&dev->i2c_bus[0].i2c_adap);
-		if (port->dvb.frontend != NULL)
-			dvb_attach(xc5000_attach, port->dvb.frontend,
+		if (fe0->dvb.frontend != NULL)
+			dvb_attach(xc5000_attach, fe0->dvb.frontend,
 				&i2c_bus->i2c_adap,
 				&hauppauge_hvr1500q_tunerconfig, port);
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 		i2c_bus = &dev->i2c_bus[1];
-		port->dvb.frontend = dvb_attach(s5h1409_attach,
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 						&hauppauge_hvr1500_config,
 						&dev->i2c_bus[0].i2c_adap);
-		if (port->dvb.frontend != NULL) {
+		if (fe0->dvb.frontend != NULL) {
 			struct dvb_frontend *fe;
 			struct xc2028_config cfg = {
 				.i2c_adap  = &i2c_bus->i2c_adap,
 				.i2c_addr  = 0x61,
-				.video_dev = port,
+				.video_dev = fe0,
 				.callback  = cx23885_tuner_callback,
 			};
 			static struct xc2028_ctrl ctl = {
@@ -414,7 +419,7 @@ static int dvb_register(struct cx23885_t
 			};
 
 			fe = dvb_attach(xc2028_attach,
-					port->dvb.frontend, &cfg);
+					fe0->dvb.frontend, &cfg);
 			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
 				fe->ops.tuner_ops.set_config(fe, &ctl);
 		}
@@ -422,29 +427,29 @@ static int dvb_register(struct cx23885_t
 	case CX23885_BOARD_HAUPPAUGE_HVR1200:
 	case CX23885_BOARD_HAUPPAUGE_HVR1700:
 		i2c_bus = &dev->i2c_bus[0];
-		port->dvb.frontend = dvb_attach(tda10048_attach,
+		fe0->dvb.frontend = dvb_attach(tda10048_attach,
 			&hauppauge_hvr1200_config,
 			&i2c_bus->i2c_adap);
-		if (port->dvb.frontend != NULL) {
-			dvb_attach(tda829x_attach, port->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(tda829x_attach, fe0->dvb.frontend,
 				&dev->i2c_bus[1].i2c_adap, 0x42,
 				&tda829x_no_probe);
-			dvb_attach(tda18271_attach, port->dvb.frontend,
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
 				0x60, &dev->i2c_bus[1].i2c_adap,
 				&hauppauge_hvr1200_tuner_config);
 		}
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
 		i2c_bus = &dev->i2c_bus[0];
-		port->dvb.frontend = dvb_attach(dib7000p_attach,
+		fe0->dvb.frontend = dvb_attach(dib7000p_attach,
 			&i2c_bus->i2c_adap,
 			0x12, &hauppauge_hvr1400_dib7000_config);
-		if (port->dvb.frontend != NULL) {
+		if (fe0->dvb.frontend != NULL) {
 			struct dvb_frontend *fe;
 			struct xc2028_config cfg = {
 				.i2c_adap  = &dev->i2c_bus[1].i2c_adap,
 				.i2c_addr  = 0x64,
-				.video_dev = port,
+				.video_dev = fe0,
 				.callback  = cx23885_tuner_callback,
 			};
 			static struct xc2028_ctrl ctl = {
@@ -455,7 +460,7 @@ static int dvb_register(struct cx23885_t
 			};
 
 			fe = dvb_attach(xc2028_attach,
-					port->dvb.frontend, &cfg);
+					fe0->dvb.frontend, &cfg);
 			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
 				fe->ops.tuner_ops.set_config(fe, &ctl);
 		}
@@ -463,30 +468,30 @@ static int dvb_register(struct cx23885_t
 	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
 		i2c_bus = &dev->i2c_bus[port->nr - 1];
 
-		port->dvb.frontend = dvb_attach(s5h1409_attach,
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 						&dvico_s5h1409_config,
 						&i2c_bus->i2c_adap);
-		if (port->dvb.frontend == NULL)
-			port->dvb.frontend = dvb_attach(s5h1411_attach,
+		if (fe0->dvb.frontend == NULL)
+			fe0->dvb.frontend = dvb_attach(s5h1411_attach,
 							&dvico_s5h1411_config,
 							&i2c_bus->i2c_adap);
-		if (port->dvb.frontend != NULL)
-			dvb_attach(xc5000_attach, port->dvb.frontend,
+		if (fe0->dvb.frontend != NULL)
+			dvb_attach(xc5000_attach, fe0->dvb.frontend,
 				&i2c_bus->i2c_adap,
-				&dvico_xc5000_tunerconfig, port);
+				&dvico_xc5000_tunerconfig, fe0);
 		break;
 	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: {
 		i2c_bus = &dev->i2c_bus[port->nr - 1];
 
-		port->dvb.frontend = dvb_attach(zl10353_attach,
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
 					       &dvico_fusionhdtv_xc3028,
 					       &i2c_bus->i2c_adap);
-		if (port->dvb.frontend != NULL) {
+		if (fe0->dvb.frontend != NULL) {
 			struct dvb_frontend      *fe;
 			struct xc2028_config	  cfg = {
 				.i2c_adap  = &i2c_bus->i2c_adap,
 				.i2c_addr  = 0x61,
-				.video_dev = port,
+				.video_dev = fe0,
 				.callback  = cx23885_tuner_callback,
 			};
 			static struct xc2028_ctrl ctl = {
@@ -495,7 +500,7 @@ static int dvb_register(struct cx23885_t
 				.demod       = XC3028_FE_ZARLINK456,
 			};
 
-			fe = dvb_attach(xc2028_attach, port->dvb.frontend,
+			fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
 					&cfg);
 			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
 				fe->ops.tuner_ops.set_config(fe, &ctl);
@@ -505,15 +510,15 @@ static int dvb_register(struct cx23885_t
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
 		i2c_bus = &dev->i2c_bus[0];
 
-		port->dvb.frontend = dvb_attach(zl10353_attach,
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
 			&dvico_fusionhdtv_xc3028,
 			&i2c_bus->i2c_adap);
-		if (port->dvb.frontend != NULL) {
+		if (fe0->dvb.frontend != NULL) {
 			struct dvb_frontend      *fe;
 			struct xc2028_config	  cfg = {
 				.i2c_adap  = &dev->i2c_bus[1].i2c_adap,
 				.i2c_addr  = 0x61,
-				.video_dev = port,
+				.video_dev = fe0,
 				.callback  = cx23885_tuner_callback,
 			};
 			static struct xc2028_ctrl ctl = {
@@ -522,7 +527,7 @@ static int dvb_register(struct cx23885_t
 				.demod       = XC3028_FE_ZARLINK456,
 			};
 
-			fe = dvb_attach(xc2028_attach, port->dvb.frontend,
+			fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
 				&cfg);
 			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
 				fe->ops.tuner_ops.set_config(fe, &ctl);
@@ -533,7 +538,7 @@ static int dvb_register(struct cx23885_t
 		       dev->name);
 		break;
 	}
-	if (NULL == port->dvb.frontend) {
+	if (NULL == fe0->dvb.frontend) {
 		printk("%s: frontend initialization failed\n", dev->name);
 		return -1;
 	}
@@ -541,18 +546,25 @@ static int dvb_register(struct cx23885_t
 	/* Put the analog decoder in standby to keep it quiet */
 	cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL);
 
-	if (port->dvb.frontend->ops.analog_ops.standby)
-		port->dvb.frontend->ops.analog_ops.standby(port->dvb.frontend);
+	if (fe0->dvb.frontend->ops.analog_ops.standby)
+		fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
 
 	/* register everything */
-	return videobuf_dvb_register(&port->dvb, THIS_MODULE, port,
+	return videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
 				     &dev->pci->dev, adapter_nr);
+
 }
 
 int cx23885_dvb_register(struct cx23885_tsport *port)
 {
+
+	struct videobuf_dvb_frontend *fe0;
 	struct cx23885_dev *dev = port->dev;
 	int err;
+
+	fe0 = videobuf_dvb_get_frontend(&port->frontends, 0);
+	if (!fe0)
+		err = -EINVAL;
 
 	dprintk(1, "%s\n", __func__);
 	dprintk(1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
@@ -565,7 +577,7 @@ int cx23885_dvb_register(struct cx23885_
 
 	/* dvb stuff */
 	printk("%s: cx23885 based dvb card\n", dev->name);
-	videobuf_queue_sg_init(&port->dvb.dvbq, &dvb_qops, &dev->pci->dev, &port->slock,
+	videobuf_queue_sg_init(&fe0->dvb.dvbq, &dvb_qops, &dev->pci->dev, &port->slock,
 			    V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP,
 			    sizeof(struct cx23885_buffer), port);
 	err = dvb_register(port);
@@ -577,9 +589,12 @@ int cx23885_dvb_register(struct cx23885_
 
 int cx23885_dvb_unregister(struct cx23885_tsport *port)
 {
+	struct videobuf_dvb_frontend *fe0;
+
+	fe0 = videobuf_dvb_get_frontend(&port->frontends, 0);
 	/* dvb */
-	if(port->dvb.frontend)
-		videobuf_dvb_unregister(&port->dvb);
+	if(fe0->dvb.frontend)
+		videobuf_dvb_unregister_bus(&port->frontends);
 
 	return 0;
 }
diff -r ffa9a0c644b3 linux/drivers/media/video/cx23885/cx23885.h
--- a/linux/drivers/media/video/cx23885/cx23885.h	Mon Sep 08 11:07:06 2008 -0400
+++ b/linux/drivers/media/video/cx23885/cx23885.h	Thu Sep 11 15:47:25 2008 +0100
@@ -226,7 +226,7 @@ struct cx23885_tsport {
 	int                        nr;
 	int                        sram_chno;
 
-	struct videobuf_dvb        dvb;
+	struct videobuf_dvb_frontends frontends;
 
 	/* dma queues */
 	struct cx23885_dmaqueue    mpegq;
diff -r ffa9a0c644b3 linux/drivers/media/video/cx88/Kconfig
--- a/linux/drivers/media/video/cx88/Kconfig	Mon Sep 08 11:07:06 2008 -0400
+++ b/linux/drivers/media/video/cx88/Kconfig	Thu Sep 11 15:47:25 2008 +0100
@@ -58,6 +58,7 @@ config VIDEO_CX88_DVB
 	select DVB_ISL6421 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
+	select DVB_CX24116 if !DVB_FE_CUSTOMISE
 	---help---
 	  This adds support for DVB/ATSC cards based on the
 	  Conexant 2388x chip.
diff -r ffa9a0c644b3 linux/drivers/media/video/cx88/cx88-cards.c
--- a/linux/drivers/media/video/cx88/cx88-cards.c	Mon Sep 08 11:07:06 2008 -0400
+++ b/linux/drivers/media/video/cx88/cx88-cards.c	Thu Sep 11 15:47:25 2008 +0100
@@ -1324,6 +1324,7 @@ static const struct cx88_board cx88_boar
 			.gpio0  = 0x84bf,
 		}},
 		.mpeg           = CX88_MPEG_DVB,
+		.num_frontends	= 2,
 	},
 	[CX88_BOARD_NORWOOD_MICRO] = {
 		.name           = "Norwood Micro TV Tuner",
@@ -1717,6 +1718,26 @@ static const struct cx88_board cx88_boar
 		 * S-Video      0xc4bf  0xc4bb
 		 * Composite1   0xc4ff  0xc4fb
 		 * S-Video1     0xc4ff  0xc4fb
+		 *
+		 * BIT  VALUE	FUNCTION GP{x}_IO
+		 * 0	1	I:?
+		 * 1	1	I:?
+		 * 2	1	O:DVB-T DEMOD ENABLE LOW/ANALOG DEMOD ENABLE HIGH
+		 * 3	1	I:?
+		 * 4	1	I:?
+		 * 5	1	I:?
+		 * 6	0	O:INPUT SELECTOR 0=INTERNAL 1=EXPANSION
+		 * 7	1	O:DVB-T DEMOD RESET LOW
+		 *
+		 * BIT  VALUE	FUNCTION GP{x}_OE
+		 * 8	0	I
+		 * 9	0	I
+		 * a	1	O
+		 * b	0	I
+		 * c	0	I
+		 * d	0	I
+		 * e	1	O
+		 * f	1	O
 		 */
 		.input          = {{
 			.type   = CX88_VMUX_TELEVISION,
@@ -1733,6 +1754,7 @@ static const struct cx88_board cx88_boar
 		} },
 		/* fixme: Add radio support */
 		.mpeg           = CX88_MPEG_DVB,
+		.num_frontends	= 2,
 	},
 	[CX88_BOARD_HAUPPAUGE_HVR4000LITE] = {
 		.name           = "Hauppauge WinTV-HVR4000(Lite) DVB-S/S2",
@@ -2543,8 +2565,13 @@ static void cx88_card_setup_pre_i2c(stru
 	case CX88_BOARD_HAUPPAUGE_HVR4000:
 	case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
 		/* Init GPIO to allow tuner to attach */
-		cx_write(MO_GP0_IO, 0x0000c4bf);
-		udelay(1000);
+		//cx_write(MO_GP0_IO, 0x0000c4bf);
+		//udelay(1000);
+
+		//from MFE
+		/* Init GPIO for DVB-S/S2/Analog */
+		cx_write(MO_GP0_IO, core->board.input[0].gpio0);
+		break;
 	}
 }
 
@@ -2871,12 +2898,17 @@ struct cx88_core *cx88_core_create(struc
 		cx88_card_list(core, pci);
 	}
 
+	memset(&core->board, 0, sizeof(core->board));
 	memcpy(&core->board, &cx88_boards[core->boardnr], sizeof(core->board));
 
-	info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
+	if (!core->board.num_frontends)
+		core->board.num_frontends=1;
+
+	info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s], frontend(s): %d\n",
 		pci->subsystem_vendor, pci->subsystem_device, core->board.name,
 		core->boardnr, card[core->nr] == core->boardnr ?
-		"insmod option" : "autodetected");
+		"insmod option" : "autodetected",
+		core->board.num_frontends);
 
 	if (tuner[core->nr] != UNSET)
 		core->board.tuner_type = tuner[core->nr];
diff -r ffa9a0c644b3 linux/drivers/media/video/cx88/cx88-dvb.c
--- a/linux/drivers/media/video/cx88/cx88-dvb.c	Mon Sep 08 11:07:06 2008 -0400
+++ b/linux/drivers/media/video/cx88/cx88-dvb.c	Thu Sep 11 15:47:25 2008 +0100
@@ -113,13 +113,24 @@ static int cx88_dvb_bus_ctrl(struct dvb_
 	struct cx8802_dev *dev= fe->dvb->priv;
 	struct cx8802_driver *drv = NULL;
 	int ret = 0;
+	int fe_id;
+
+	fe_id = videobuf_dvb_find_frontend(&dev->frontends, fe);
+	if (!fe_id) {
+		printk(KERN_ERR "%s() No frontend found\n", __FUNCTION__);
+		return -EINVAL;
+	}
+
 
 	drv = cx8802_get_driver(dev, CX88_MPEG_DVB);
 	if (drv) {
-		if (acquire)
+		if (acquire){
+			dev->frontends.active_fe_id = fe_id;
 			ret = drv->request_acquire(drv);
-		else
+		} else {
 			ret = drv->request_release(drv);
+			dev->frontends.active_fe_id = 0;
+		}
 	}
 
 	return ret;
@@ -516,6 +527,7 @@ static int attach_xc3028(u8 addr, struct
 static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
 {
 	struct dvb_frontend *fe;
+	struct videobuf_dvb_frontend *fe0 = NULL;
 	struct xc2028_ctrl ctl;
 	struct xc2028_config cfg = {
 		.i2c_adap  = &dev->core->i2c_adap,
@@ -524,7 +536,12 @@ static int attach_xc3028(u8 addr, struct
 		.callback  = cx88_tuner_callback,
 	};
 
-	if (!dev->dvb.frontend) {
+/* Get the first frontend */
+	fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
+	if (!fe0)
+		return -EINVAL;
+
+	if (!fe0->dvb.frontend) {
 		printk(KERN_ERR "%s/2: dvb frontend not attached. "
 				"Can't attach xc3028\n",
 		       dev->core->name);
@@ -538,10 +555,13 @@ static int attach_xc3028(u8 addr, struct
 	 */
 	cx88_setup_xc3028(dev->core, &ctl);
 
-	fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg);
+	fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
 	if (!fe) {
 		printk(KERN_ERR "%s/2: xc3028 attach failed\n",
 		       dev->core->name);
+		dvb_frontend_detach(fe0->dvb.frontend);
+		dvb_unregister_frontend(fe0->dvb.frontend);
+		fe0->dvb.frontend = NULL;
 		return -EINVAL;
 	}
 
@@ -566,8 +586,10 @@ static int cx24116_reset_device(struct d
 	struct cx88_core *core = dev->core;
 
 	/* Reset the part */
+	/* Put the cx24116 into reset */
 	cx_write(MO_SRST_IO, 0);
 	msleep(10);
+	/* Take the cx24116 out of reset */
 	cx_write(MO_SRST_IO, 1);
 	msleep(10);
 
@@ -588,20 +610,28 @@ static struct cx24116_config tevii_s460_
 
 static int dvb_register(struct cx8802_dev *dev)
 {
+	//struct cx88_core *core = dev->core;
+
+	///* init struct videobuf_dvb */
+	//dev->dvb.name = core->name;
+	//dev->ts_gen_cntrl = 0x0c;
+
 	struct cx88_core *core = dev->core;
+	struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
 
-	/* init struct videobuf_dvb */
-	dev->dvb.name = core->name;
-	dev->ts_gen_cntrl = 0x0c;
+	/* Get the first frontend */
+	fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
+	if (!fe0)
+		return -EINVAL;
 
 	/* init frontend */
 	switch (core->boardnr) {
 	case CX88_BOARD_HAUPPAUGE_DVB_T1:
-		dev->dvb.frontend = dvb_attach(cx22702_attach,
+		fe0->dvb.frontend = dvb_attach(cx22702_attach,
 					       &connexant_refboard_config,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
 					0x61, &core->i2c_adap,
 					DVB_PLL_THOMSON_DTT759X))
 				goto frontend_detach;
@@ -611,11 +641,11 @@ static int dvb_register(struct cx8802_de
 	case CX88_BOARD_CONEXANT_DVB_T1:
 	case CX88_BOARD_KWORLD_DVB_T_CX22702:
 	case CX88_BOARD_WINFAST_DTV1000:
-		dev->dvb.frontend = dvb_attach(cx22702_attach,
+		fe0->dvb.frontend = dvb_attach(cx22702_attach,
 					       &connexant_refboard_config,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
 					0x60, &core->i2c_adap,
 					DVB_PLL_THOMSON_DTT7579))
 				goto frontend_detach;
@@ -625,33 +655,84 @@ static int dvb_register(struct cx8802_de
 	case CX88_BOARD_HAUPPAUGE_HVR1100:
 	case CX88_BOARD_HAUPPAUGE_HVR1100LP:
 	case CX88_BOARD_HAUPPAUGE_HVR1300:
-	case CX88_BOARD_HAUPPAUGE_HVR3000:
-		dev->dvb.frontend = dvb_attach(cx22702_attach,
+		fe0->dvb.frontend = dvb_attach(cx22702_attach,
 					       &hauppauge_hvr_config,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
 				   &core->i2c_adap, 0x61,
 				   TUNER_PHILIPS_FMD1216ME_MK3))
 				goto frontend_detach;
 		}
 		break;
+	case CX88_BOARD_HAUPPAUGE_HVR3000:
+		/* DVB-S init */
+
+		fe0->dvb.frontend = dvb_attach(cx24123_attach,
+			       &hauppauge_novas_config,
+			       &dev->core->i2c_adap);
+
+		if (fe0->dvb.frontend) {
+			/*
+  			 * ISL6421_DCL turns off dynamic current protection
+  			 * and enforces static protection.
+  			 *
+  			 * This is a requirement for 4x1 DiSEqC switches
+  	 		 * and/or Rotors. 
+  			 *
+  			 * This is also how the Windows driver configures
+  			 * the LNB voltage controller. (dmb).
+  			 */
+			if (!dvb_attach(isl6421_attach, fe0->dvb.frontend,
+			&dev->core->i2c_adap, 0x08, ISL6421_DCL, 0x00)) {
+				dprintk( 1, "%s(): HVR3000 - DVB-S LNB Init: failed\n", __FUNCTION__);
+			}
+		} else {
+			dprintk( 1, "%s(): HVR3000 - DVB-S Init: failed\n", __FUNCTION__);
+		}
+
+		/* DVB-T init */
+
+		fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2);
+
+		if (fe1) {
+			fe1->dvb.frontend = dvb_attach(cx22702_attach,
+				&hauppauge_hvr_config,
+				&dev->core->i2c_adap);
+
+			if (fe1->dvb.frontend) {
+				fe1->dvb.frontend->id = 1;
+				if(!dvb_attach(simple_tuner_attach, fe1->dvb.frontend,
+						&dev->core->i2c_adap, 0x61,
+						TUNER_PHILIPS_FMD1216ME_MK3)) {
+					dprintk( 1, "%s(): HVR3000 - DVB-T misc Init: failed\n", __FUNCTION__);
+				}
+			} else {
+				dprintk( 1, "%s(): HVR3000 - DVB-T Init: failed\n", __FUNCTION__);
+			}
+		} else {
+			dprintk( 1, "%s(): HVR3000 - DVB-T Init: can't find frontend 2.\n", __FUNCTION__);
+		}
+
+		break;
+
+
 	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
-		dev->dvb.frontend = dvb_attach(mt352_attach,
+		fe0->dvb.frontend = dvb_attach(mt352_attach,
 					       &dvico_fusionhdtv,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
 					0x60, NULL, DVB_PLL_THOMSON_DTT7579))
 				goto frontend_detach;
 			break;
 		}
 		/* ZL10353 replaces MT352 on later cards */
-		dev->dvb.frontend = dvb_attach(zl10353_attach,
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
 					       &dvico_fusionhdtv_plus_v1_1,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
 					0x60, NULL, DVB_PLL_THOMSON_DTT7579))
 				goto frontend_detach;
 		}
@@ -659,31 +740,31 @@ static int dvb_register(struct cx8802_de
 	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL:
 		/* The tin box says DEE1601, but it seems to be DTT7579
 		 * compatible, with a slightly different MT352 AGC gain. */
-		dev->dvb.frontend = dvb_attach(mt352_attach,
+		fe0->dvb.frontend = dvb_attach(mt352_attach,
 					       &dvico_fusionhdtv_dual,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
 					0x61, NULL, DVB_PLL_THOMSON_DTT7579))
 				goto frontend_detach;
 			break;
 		}
 		/* ZL10353 replaces MT352 on later cards */
-		dev->dvb.frontend = dvb_attach(zl10353_attach,
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
 					       &dvico_fusionhdtv_plus_v1_1,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
 					0x61, NULL, DVB_PLL_THOMSON_DTT7579))
 				goto frontend_detach;
 		}
 		break;
 	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
-		dev->dvb.frontend = dvb_attach(mt352_attach,
+		fe0->dvb.frontend = dvb_attach(mt352_attach,
 					       &dvico_fusionhdtv,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
 					0x61, NULL, DVB_PLL_LG_Z201))
 				goto frontend_detach;
 		}
@@ -691,11 +772,11 @@ static int dvb_register(struct cx8802_de
 	case CX88_BOARD_KWORLD_DVB_T:
 	case CX88_BOARD_DNTV_LIVE_DVB_T:
 	case CX88_BOARD_ADSTECH_DVB_T_PCI:
-		dev->dvb.frontend = dvb_attach(mt352_attach,
+		fe0->dvb.frontend = dvb_attach(mt352_attach,
 					       &dntv_live_dvbt_config,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
 					0x61, NULL, DVB_PLL_UNKNOWN_1))
 				goto frontend_detach;
 		}
@@ -703,10 +784,10 @@ static int dvb_register(struct cx8802_de
 	case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
 #if defined(CONFIG_VIDEO_CX88_VP3054) || (defined(CONFIG_VIDEO_CX88_VP3054_MODULE) && defined(MODULE))
 		/* MT352 is on a secondary I2C bus made from some GPIO lines */
-		dev->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config,
+		fe0->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config,
 					       &dev->vp3054->adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
 					&core->i2c_adap, 0x61,
 					TUNER_PHILIPS_FMD1216ME_MK3))
 				goto frontend_detach;
@@ -717,22 +798,22 @@ static int dvb_register(struct cx8802_de
 #endif
 		break;
 	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID:
-		dev->dvb.frontend = dvb_attach(zl10353_attach,
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
 					       &dvico_fusionhdtv_hybrid,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
 				   &core->i2c_adap, 0x61,
 				   TUNER_THOMSON_FE6600))
 				goto frontend_detach;
 		}
 		break;
 	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
-		dev->dvb.frontend = dvb_attach(zl10353_attach,
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
 					       &dvico_fusionhdtv_xc3028,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend == NULL)
-			dev->dvb.frontend = dvb_attach(mt352_attach,
+		if (fe0->dvb.frontend == NULL)
+			fe0->dvb.frontend = dvb_attach(mt352_attach,
 						&dvico_fusionhdtv_mt352_xc3028,
 						&core->i2c_adap);
 		/*
@@ -740,16 +821,16 @@ static int dvb_register(struct cx8802_de
 		 * We must not permit gate_ctrl to be performed, or
 		 * the xc3028 cannot communicate on the bus.
 		 */
-		if (dev->dvb.frontend)
-			dev->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+		if (fe0->dvb.frontend)
+			fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
 		if (attach_xc3028(0x61, dev) < 0)
 			return -EINVAL;
 		break;
 	case CX88_BOARD_PCHDTV_HD3000:
-		dev->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000,
+		fe0->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
 					&core->i2c_adap, 0x61,
 					TUNER_THOMSON_DTT761X))
 				goto frontend_detach;
@@ -766,11 +847,11 @@ static int dvb_register(struct cx8802_de
 
 		/* Select RF connector callback */
 		fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set;
-		dev->dvb.frontend = dvb_attach(lgdt330x_attach,
+		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
 					       &fusionhdtv_3_gold,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
 					&core->i2c_adap, 0x61,
 					TUNER_MICROTUNE_4042FI5))
 				goto frontend_detach;
@@ -784,11 +865,11 @@ static int dvb_register(struct cx8802_de
 		mdelay(100);
 		cx_set(MO_GP0_IO, 9);
 		mdelay(200);
-		dev->dvb.frontend = dvb_attach(lgdt330x_attach,
+		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
 					       &fusionhdtv_3_gold,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
 					&core->i2c_adap, 0x61,
 					TUNER_THOMSON_DTT761X))
 				goto frontend_detach;
@@ -802,15 +883,15 @@ static int dvb_register(struct cx8802_de
 		mdelay(100);
 		cx_set(MO_GP0_IO, 1);
 		mdelay(200);
-		dev->dvb.frontend = dvb_attach(lgdt330x_attach,
+		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
 					       &fusionhdtv_5_gold,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
 					&core->i2c_adap, 0x61,
 					TUNER_LG_TDVS_H06XF))
 				goto frontend_detach;
-			if (!dvb_attach(tda9887_attach, dev->dvb.frontend,
+			if (!dvb_attach(tda9887_attach, fe0->dvb.frontend,
 				   &core->i2c_adap, 0x43))
 				goto frontend_detach;
 		}
@@ -823,25 +904,25 @@ static int dvb_register(struct cx8802_de
 		mdelay(100);
 		cx_set(MO_GP0_IO, 1);
 		mdelay(200);
-		dev->dvb.frontend = dvb_attach(lgdt330x_attach,
+		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
 					       &pchdtv_hd5500,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
 					&core->i2c_adap, 0x61,
 					TUNER_LG_TDVS_H06XF))
 				goto frontend_detach;
-			if (!dvb_attach(tda9887_attach, dev->dvb.frontend,
+			if (!dvb_attach(tda9887_attach, fe0->dvb.frontend,
 				   &core->i2c_adap, 0x43))
 				goto frontend_detach;
 		}
 		break;
 	case CX88_BOARD_ATI_HDTVWONDER:
-		dev->dvb.frontend = dvb_attach(nxt200x_attach,
+		fe0->dvb.frontend = dvb_attach(nxt200x_attach,
 					       &ati_hdtvwonder,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
 					&core->i2c_adap, 0x61,
 					TUNER_PHILIPS_TUV1236D))
 				goto frontend_detach;
@@ -849,42 +930,43 @@ static int dvb_register(struct cx8802_de
 		break;
 	case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
 	case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
-		dev->dvb.frontend = dvb_attach(cx24123_attach,
+		fe0->dvb.frontend = dvb_attach(cx24123_attach,
 					       &hauppauge_novas_config,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend) {
-			if (!dvb_attach(isl6421_attach, dev->dvb.frontend,
+		if (fe0->dvb.frontend) {
+//TODO Darron has different code here
+			if (!dvb_attach(isl6421_attach, fe0->dvb.frontend,
 					&core->i2c_adap, 0x08, 0x00, 0x00))
 				goto frontend_detach;
 		}
 		break;
 	case CX88_BOARD_KWORLD_DVBS_100:
-		dev->dvb.frontend = dvb_attach(cx24123_attach,
+		fe0->dvb.frontend = dvb_attach(cx24123_attach,
 					       &kworld_dvbs_100_config,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend) {
-			core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
-			dev->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage;
+		if (fe0->dvb.frontend) {
+			core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+			fe0->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage;
 		}
 		break;
 	case CX88_BOARD_GENIATECH_DVBS:
-		dev->dvb.frontend = dvb_attach(cx24123_attach,
+		fe0->dvb.frontend = dvb_attach(cx24123_attach,
 					       &geniatech_dvbs_config,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend) {
-			core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
-			dev->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage;
+		if (fe0->dvb.frontend) {
+			core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+			fe0->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage;
 		}
 		break;
 	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
-		dev->dvb.frontend = dvb_attach(s5h1409_attach,
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 					       &pinnacle_pctv_hd_800i_config,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
+		if (fe0->dvb.frontend != NULL) {
 			/* tuner_config.video_dev must point to
 			 * i2c_adap.algo_data
 			 */
-			if (!dvb_attach(xc5000_attach, dev->dvb.frontend,
+			if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
 					&core->i2c_adap,
 					&pinnacle_pctv_hd_800i_tuner_config,
 					core->i2c_adap.algo_data))
@@ -892,10 +974,10 @@ static int dvb_register(struct cx8802_de
 		}
 		break;
 	case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
-		dev->dvb.frontend = dvb_attach(s5h1409_attach,
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 						&dvico_hdtv5_pci_nano_config,
 						&core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
+		if (fe0->dvb.frontend != NULL) {
 			struct dvb_frontend *fe;
 			struct xc2028_config cfg = {
 				.i2c_adap  = &core->i2c_adap,
@@ -909,13 +991,13 @@ static int dvb_register(struct cx8802_de
 			};
 
 			fe = dvb_attach(xc2028_attach,
-					dev->dvb.frontend, &cfg);
+					fe0->dvb.frontend, &cfg);
 			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
 				fe->ops.tuner_ops.set_config(fe, &ctl);
 		}
 		break;
 	 case CX88_BOARD_PINNACLE_HYBRID_PCTV:
-		dev->dvb.frontend = dvb_attach(zl10353_attach,
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
 					       &cx88_geniatech_x8000_mt,
 					       &core->i2c_adap);
 		if (attach_xc3028(0x61, dev) < 0)
@@ -924,28 +1006,28 @@ static int dvb_register(struct cx8802_de
 	 case CX88_BOARD_GENIATECH_X8000_MT:
 		dev->ts_gen_cntrl = 0x00;
 
-		dev->dvb.frontend = dvb_attach(zl10353_attach,
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
 					       &cx88_geniatech_x8000_mt,
 					       &core->i2c_adap);
 		if (attach_xc3028(0x61, dev) < 0)
 			goto frontend_detach;
 		break;
 	 case CX88_BOARD_KWORLD_ATSC_120:
-		dev->dvb.frontend = dvb_attach(s5h1409_attach,
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 					       &kworld_atsc_120_config,
 					       &core->i2c_adap);
 		if (attach_xc3028(0x61, dev) < 0)
 			goto frontend_detach;
 		break;
 	case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
-		dev->dvb.frontend = dvb_attach(s5h1411_attach,
+		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
 					       &dvico_fusionhdtv7_config,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
+		if (fe0->dvb.frontend != NULL) {
 			/* tuner_config.video_dev must point to
 			 * i2c_adap.algo_data
 			 */
-			if (!dvb_attach(xc5000_attach, dev->dvb.frontend,
+			if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
 					&core->i2c_adap,
 					&dvico_fusionhdtv7_tuner_config,
 					core->i2c_adap.algo_data))
@@ -953,24 +1035,76 @@ static int dvb_register(struct cx8802_de
 		}
 		break;
 	case CX88_BOARD_HAUPPAUGE_HVR4000:
+		/* DVB-S/S2 Enabled */
+		fe0->dvb.frontend = dvb_attach(cx24116_attach,
+					&hauppauge_hvr4000_config,
+					&dev->core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			/*
+  			 * ISL6421_DCL turns off dynamic current protection
+  			 * and enforces static protection.
+  			 *
+  			 * This is a requirement for 4x1 DiSEqC switches
+  			 * and/or Rotors. 
+  			 *
+  			 * This is also how the Windows driver configures
+ 			 * the LNB voltage controller. (dmb).
+  			 */
+			if(!dvb_attach(isl6421_attach, fe0->dvb.frontend,
+			&dev->core->i2c_adap, 0x08, ISL6421_DCL, 0x00)) {
+				dprintk( 1, "%s(): HVR4000 - DVB-S LNB Init: failed\n", __FUNCTION__);
+			}
+		} else {
+			dprintk( 1, "%s(): HVR4000 - DVB-S Init: failed\n", __FUNCTION__);
+		}
+
+		fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2);
+
+		/* DVB-T Enabled */
+		if (fe1) {
+			fe1->dvb.frontend = dvb_attach(cx22702_attach,
+					       &hauppauge_hvr_config,
+					       &dev->core->i2c_adap);
+			if (fe1->dvb.frontend) {
+				fe1->dvb.frontend->id = 1;
+				if(!dvb_attach(simple_tuner_attach, fe1->dvb.frontend,
+						&dev->core->i2c_adap, 0x61,
+						TUNER_PHILIPS_FMD1216ME_MK3)) {
+					dprintk( 1, "%s(): HVR4000 - DVB-T misc Init: failed\n", __FUNCTION__);
+				}
+			} else {
+				dprintk( 1, "%s(): HVR4000 - DVB-T Init: failed\n", __FUNCTION__);
+			}
+		} else {
+			dprintk( 1, "%s(): HVR4000 - DVB-T Init: can't find frontend 2.\n", __FUNCTION__);
+		}
+		break;
 	case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
-		/* Support for DVB-S only, not DVB-T support */
-		dev->dvb.frontend = dvb_attach(cx24116_attach,
-			&hauppauge_hvr4000_config,
-			&dev->core->i2c_adap);
-		if (dev->dvb.frontend) {
-			dvb_attach(isl6421_attach, dev->dvb.frontend,
-				&dev->core->i2c_adap,
-				0x08, 0x00, 0x00);
+		fe0->dvb.frontend = dvb_attach(cx24116_attach,
+						&hauppauge_hvr4000_config,
+						&dev->core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			/*
+  			 * ISL6421_DCL turns off dynamic current protection
+  			 * and enforces static protection.
+  			 *
+  			 * This is a requirement for 4x1 DiSEqC switches
+  			 * and/or Rotors. 
+  			 *
+  			 * This is also how the Windows driver configures
+  			 * the LNB voltage controller. (dmb).
+  			 */
+			dvb_attach(isl6421_attach, fe0->dvb.frontend,
+			&dev->core->i2c_adap, 0x08, ISL6421_DCL, 0x00);
 		}
 		break;
 	case CX88_BOARD_TEVII_S460:
-	        dev->dvb.frontend = dvb_attach(cx24116_attach,
+	        fe0->dvb.frontend = dvb_attach(cx24116_attach,
 					       &tevii_s460_config,
 					       &core->i2c_adap);
-		if (dev->dvb.frontend != NULL) {
-			core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
-			dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
+		if (fe0->dvb.frontend != NULL) {
+			core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+			fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
 		}
 		break;
 	default:
@@ -978,7 +1112,8 @@ static int dvb_register(struct cx8802_de
 		       core->name);
 		break;
 	}
-	if (NULL == dev->dvb.frontend) {
+
+        if ( (NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend) ) {
 		printk(KERN_ERR
 		       "%s/2: frontend initialization failed\n",
 		       core->name);
@@ -986,19 +1121,25 @@ static int dvb_register(struct cx8802_de
 	}
 
 	/* Ensure all frontends negotiate bus access */
-	dev->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
+	fe0->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
+	if (fe1)
+		fe1->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
+
 
 	/* Put the analog decoder in standby to keep it quiet */
 	cx88_call_i2c_clients(core, TUNER_SET_STANDBY, NULL);
 
 	/* register everything */
-	return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev,
-				     &dev->pci->dev, adapter_nr);
+	//return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev,
+	//			     &dev->pci->dev, adapter_nr);
+//TODO there's a new param (adapter_nr) on line above, why? Looks like should be on line below too
+	return videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, &dev->pci->dev, adapter_nr);
+
 
 frontend_detach:
-	if (dev->dvb.frontend) {
-		dvb_frontend_detach(dev->dvb.frontend);
-		dev->dvb.frontend = NULL;
+	if (fe0->dvb.frontend) {
+		dvb_frontend_detach(fe0->dvb.frontend);
+		fe0->dvb.frontend = NULL;
 	}
 	return -EINVAL;
 }
@@ -1022,6 +1163,66 @@ static int cx8802_dvb_advise_acquire(str
 		cx_clear(MO_GP0_IO, 0x00000004);
 		udelay(1000);
 		break;
+
+	case CX88_BOARD_HAUPPAUGE_HVR3000: /* ? */
+		if(core->dvbdev->frontends.active_fe_id == 1) {
+			/* DVB-S/S2 Enabled */
+
+			/* Toggle reset on cx22702 leaving i2c active */
+			cx_write(MO_GP0_IO, core->board.input[0].gpio0);
+			udelay(1000);
+			cx_clear(MO_GP0_IO, 0x00000080);
+			udelay(50);
+			cx_set(MO_GP0_IO, 0x00000080); /* cx22702 out of reset */
+			cx_set(MO_GP0_IO, 0x00000004); /* tri-state the cx22702 pins */
+			udelay(1000);
+
+			cx_write(MO_SRST_IO, 1); /* Take the cx24116/cx24123 out of reset */
+			core->dvbdev->ts_gen_cntrl = 0x02; /* Parallel IO */
+		} else
+		if (core->dvbdev->frontends.active_fe_id == 2) {
+			/* DVB-T Enabled */
+
+			/* Put the cx24116/cx24123 into reset */
+			cx_write(MO_SRST_IO, 0);
+
+			/* cx22702 out of reset and enable it */
+			cx_set(MO_GP0_IO,   0x00000080);
+			cx_clear(MO_GP0_IO, 0x00000004);
+			core->dvbdev->ts_gen_cntrl = 0x0c; /* Serial IO */
+			udelay(1000);
+		}
+		break;
+	case CX88_BOARD_HAUPPAUGE_HVR4000:
+		if(core->dvbdev->frontends.active_fe_id == 1) {
+			/* DVB-S/S2 Enabled */
+
+			/* Toggle reset on cx22702 leaving i2c active */
+			cx_write(MO_GP0_IO, (core->board.input[0].gpio0 & 0x0000ff00) | 0x00000080);
+			udelay(1000);
+			cx_clear(MO_GP0_IO, 0x00000080);
+			udelay(50);
+			cx_set(MO_GP0_IO, 0x00000080); /* cx22702 out of reset */
+			cx_set(MO_GP0_IO, 0x00000004); /* tri-state the cx22702 pins */
+			udelay(1000);
+
+			cx_write(MO_SRST_IO, 1); /* Take the cx24116/cx24123 out of reset */
+			core->dvbdev->ts_gen_cntrl = 0x02; /* Parallel IO */
+		} else
+		if (core->dvbdev->frontends.active_fe_id == 2) {
+			/* DVB-T Enabled */
+
+			/* Put the cx24116/cx24123 into reset */
+			cx_write(MO_SRST_IO, 0);
+
+			/* cx22702 out of reset and enable it */
+			cx_set(MO_GP0_IO,   0x00000080);
+			cx_clear(MO_GP0_IO, 0x00000004);
+			core->dvbdev->ts_gen_cntrl = 0x0c; /* Serial IO */
+			udelay(1000);
+		}
+		break;
+
 	default:
 		err = -ENODEV;
 	}
@@ -1042,6 +1243,9 @@ static int cx8802_dvb_advise_release(str
 		 cx_set(MO_GP0_IO, 0x00000004);
 #endif
 		break;
+	case CX88_BOARD_HAUPPAUGE_HVR3000:
+	case CX88_BOARD_HAUPPAUGE_HVR4000:
+		break;
 	default:
 		err = -ENODEV;
 	}
@@ -1052,7 +1256,8 @@ static int cx8802_dvb_probe(struct cx880
 {
 	struct cx88_core *core = drv->core;
 	struct cx8802_dev *dev = drv->core->dvbdev;
-	int err;
+	int err,i;
+	struct videobuf_dvb_frontend *fe;
 
 	dprintk( 1, "%s\n", __func__);
 	dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
@@ -1072,12 +1277,23 @@ static int cx8802_dvb_probe(struct cx880
 
 	/* dvb stuff */
 	printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name);
-	videobuf_queue_sg_init(&dev->dvb.dvbq, &dvb_qops,
+	dev->ts_gen_cntrl = 0x0c;
+
+	for (i = 1; i <= core->board.num_frontends; i++) {
+		fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i);
+		if (!fe) {
+			printk(KERN_ERR "%s() failed to get frontend(%d)\n", __FUNCTION__, i);
+			continue;
+		}
+		videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops,
 			    &dev->pci->dev, &dev->slock,
 			    V4L2_BUF_TYPE_VIDEO_CAPTURE,
 			    V4L2_FIELD_TOP,
 			    sizeof(struct cx88_buffer),
 			    dev);
+		/* init struct videobuf_dvb */
+		fe->dvb.name = dev->core->name;
+	}
 	err = dvb_register(dev);
 	if (err != 0)
 		printk(KERN_ERR "%s/2: dvb_register failed (err = %d)\n",
@@ -1092,8 +1308,10 @@ static int cx8802_dvb_remove(struct cx88
 	struct cx8802_dev *dev = drv->core->dvbdev;
 
 	/* dvb */
-	if (dev->dvb.frontend)
-		videobuf_dvb_unregister(&dev->dvb);
+//TODO is the if necessary, and does it work?
+	//if (dev->dvb.frontend)
+	videobuf_dvb_unregister_bus(&dev->frontends);
+
 
 	vp3054_i2c_remove(dev);