* [linux-dvb] Fwd: Re: Fwd: ubuntu installed geniatech x8000
@ 2008-09-23 20:51 Vanessa Ezekowitz
0 siblings, 0 replies; only message in thread
From: Vanessa Ezekowitz @ 2008-09-23 20:51 UTC (permalink / raw)
To: linux-dvb
Another one from Larry. I've advised him to join this list.
---------- Forwarded Message ----------
Subject: Re: Fwd: ubuntu installed geniatech x8000
Date: Tuesday 23 September 2008
From: Ruth Fernandez <larrykathy3@verizon.net>
To: Vanessa Ezekowitz <vanessaezekowitz@gmail.com>
No luck Larry
root@flaroom:/home/larry/v4l-dvb# make menuconfig
make -C /home/larry/v4l-dvb/v4l menuconfig
make[1]: Entering directory `/home/larry/v4l-dvb/v4l'
make -C /lib/modules/2.6.24-19-server/build -f /home/larry/v4l-dvb/v4l/Makefile.kernel
config-targets=1 mixed-targets=0 dot-config=0
SRCDIR=/lib/modules/2.6.24-19-server/build v4l-mconf
make: Entering an unknown directory
make: *** /lib/modules/2.6.24-19-server/build: No such file or directory.
Stop.
make: Leaving an unknown directory
make[1]: *** [/lib/modules/2.6.24-19-server/build/scripts/kconfig/mconf] Error
2
make[1]: Leaving directory `/home/larry/v4l-dvb/v4l'
make: *** [menuconfig] Error 2
--- On Mon, 9/22/08, Vanessa Ezekowitz <vanessaezekowitz@gmail.com> wrote:
From: Vanessa Ezekowitz <vanessaezekowitz@gmail.com>
Subject: Re: Fwd: ubuntu installed geniatech x8000
To: larrykathy3@verizon.net
Date: Monday, September 22, 2008, 3:50 PM
On Monday 22 September 2008 12:19:05 pm Ruth Fernandez wrote:
> Thanks for everything. I was looking through you email and discovered the
> make kernel-links command had to be in root. I tried it and it worked. It
> made build directory but not the .config file. Could you send me a copy of
> your .config file. I΅m so close now I can taste it. Thanks again
Larry
You're not supposed to run that command.
I would advise at this point that you delete the v4l-dvb directory and pull in
a fresh copy.
Then, only run these commands:
make menuconfig #(then immediately exit and let it save)
make -j4
The menuconfig target creates a .config file. The second make step compiles
the code against it.
Be sure to run these as root or it will not work right.
I can't attach mine because it is outdated (my copy of the repository is
pretty old).
--
"Life is full of positive and negative events. Spend
your time considering the former, not the latter."
Vanessa Ezekowitz <vanessaezekowitz@gmail.com>
-------------------------------------------------------
--
"Life is full of positive and negative events. Spend
your time considering the former, not the latter."
Vanessa Ezekowitz <vanessaezekowitz@gmail.com>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-09-23 20:50 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-09-23 20:51 [linux-dvb] Fwd: Re: Fwd: ubuntu installed geniatech x8000 Vanessa Ezekowitz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox