[linux-dvb] DVB driver in 2.6.26 seem to stop sending data

[Brendon Higgins <blhiggins@gmail.com>]

[-- Attachment #1.1: Type: text/plain, Size: 1560 bytes --]

Hi list,

I'm having a problem with the DVB drivers in Linux 2.6.26, compared to 2.6.25 
for which there is no problem. I hope someone can help. Everything seems fine 
when I boot and VDR starts running, until after a while (not sure how long, 
perhaps some hours) DVB output seems to stop.

What I find when I come back to watch VDR is that it seems to be receiving no 
data. Interestingly, VDR does not complain about it, it just displays a black 
screen (I'm using dxr3 output), but the UI still works, and I can change 
channels (every channel is also black). Stream info says 0 kbps for both audio 
and video.

Restarting VDR does not solve the problem - there is still no data. I'm not 
sure which of the myriad of modules I'd have to rmmod and then re-modprobe (if 
that might even work), so I end up having to reboot the machine. Once I 
reboot, DVB output is back to normal, until after some time the cycle starts 
again.

I'm trying to get an idea why I'm having this problem, and I'm at a loss where 
to start. The problem means I have to stick with 2.6.25. Has anyone else seen 
this sort of thing, or suggestions where I should look (if I'm asking the 
wrong place, let me know)? Any help appreciated.

Some info:
AMD64 dual core
VDR 1.6.0
Debian Testing (mostly)
DVICO Fusion HDTV DVB-T plus
01:06.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and 
Audio Decoder (rev 05)
01:06.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio 
Decoder [MPEG Port] (rev 05)

Peace,
Brendon

[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb