From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from relay-pt3.poste.it ([62.241.4.129]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1KqFh5-0006i8-VZ for linux-dvb@linuxtv.org; Thu, 16 Oct 2008 01:22:22 +0200 Received: from geppetto.reilabs.com (78.15.185.20) by relay-pt3.poste.it (7.3.122) (authenticated as stefano.sabatini-lala@poste.it) id 48F6763600000100 for linux-dvb@linuxtv.org; Thu, 16 Oct 2008 01:22:16 +0200 Received: from stefano by geppetto.reilabs.com with local (Exim 4.67) (envelope-from ) id 1KqFg9-00061B-GC for linux-dvb@linuxtv.org; Thu, 16 Oct 2008 01:21:21 +0200 Date: Thu, 16 Oct 2008 01:21:21 +0200 From: Stefano Sabatini To: linux-dvb@linuxtv.org Message-ID: <20081015232121.GA8831@geppetto> References: <20081014212402.GB11745@geppetto> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20081014212402.GB11745@geppetto> Subject: Re: [linux-dvb] Unable to query frontend status with dvbscan List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: On date Tuesday 2008-10-14 23:24:02 +0200, Stefano Sabatini wrote: > Hi all, > > can you say what's the meaning of such a message? > > I'm using it with: > dvbscan /usr/share/dvb/dvb-t/it-MyCity > Unable to query frontend status > > using a TerraTec Electronic GmbH with dvb-usb-dib0700 driver. > > The module seems to be loaded correctly, indeed I get this in the > kernel log: > > [ 1834.456051] dib0700: loaded with support for 7 different device-types > [ 1834.456051] dvb-usb: found a 'Terratec Cinergy HT USB XE' in cold state, will try to load a firmware > [ 1834.456051] firmware: requesting dvb-usb-dib0700-1.10.fw > [ 1834.464197] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' > [ 1834.662979] dib0700: firmware started successfully. > [ 1835.168928] dvb-usb: found a 'Terratec Cinergy HT USB XE' in warm state. > [ 1835.168997] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. > [ 1835.169355] DVB: registering new adapter (Terratec Cinergy HT USB XE) > [ 1835.419963] DVB: registering frontend 0 (DiBcom 7000PC)... > [ 1835.499932] xc2028 1-0061: creating new instance > [ 1835.499932] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner > [ 1835.499932] input: IR-receiver inside an USB DVB receiver as /class/input/input7 > [ 1835.510406] dvb-usb: schedule remote query interval to 150 msecs. > [ 1835.510416] dvb-usb: Terratec Cinergy HT USB XE successfully initialized and connected. > [ 1835.510696] usbcore: registered new interface driver dvb_usb_dib0700 > > The led on the device switched on when I performed the first scan. Other meaningful info: stefano@geppetto ~> dvbscan /usr/share/dvb/dvb-t/it-Cagliari Unable to query frontend status stefano@geppetto ~> sudo dvbscan /usr/share/dvb/dvb-t/it-Cagliari Unable to query frontend status stefano@geppetto ~> ls -l /dev/dvb/adapter0/ total 0 crw-rw---- 1 root video 212, 1 2008-09-23 00:04 audio0 crw-rw---- 1 root video 212, 6 2008-09-23 00:04 ca0 crw-rw---- 1 root video 212, 4 2008-09-23 00:04 demux0 crw-rw---- 1 root video 212, 5 2008-09-23 00:04 dvr0 crw-rw---- 1 root video 212, 3 2008-09-23 00:04 frontend0 crw-rw---- 1 root video 212, 7 2008-09-23 00:04 net0 crw-rw---- 1 root video 212, 8 2008-09-23 00:04 osd0 crw-rw---- 1 root video 212, 0 2008-09-23 00:04 video0 stefano@geppetto ~> uname -a Linux geppetto 2.6.26-1-686 #1 SMP Thu Oct 9 15:18:09 UTC 2008 i686 GNU/Linux The device is reported to be supported on the DVB wiki: http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_HT_USB_XE Help or hints will be appreciated. Regards. _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb