Re: [linux-dvb] stb0899 drivers

Re: [linux-dvb] stb0899 drivers

[oleg roitburd]

2008/10/23 Igor M. Liplianin <liplianin@tut.by>:
> Hi Steven and Mauro
>
> As I understand, now we all waiting (again!) for Manu Abraham to commit?
> Truly his code are huge and needs long time to clean up, but I made
> http://mercurial.intuxication.org/hg/s2-liplianin
> in order to help to convert it.
> Right now I state the code is stable and works absolutely of no difference with multiproto
> version.
> I mean it locks all channels, which multiproto version locks, but without any modifications to
> current DVB API.
> What can I do now?
>
> Igor

Thx a lot. It works fine. I'm voting for merge your tree to v4l-dvb.


Regards
Oleg Roitburd

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] stb0899 drivers

[Goga777]

Приветствую, oleg
> 2008/10/23 Igor M. Liplianin <liplianin@tut.by>:
> > Hi Steven and Mauro
> >
> > As I understand, now we all waiting (again!) for Manu Abraham to commit?
> > Truly his code are huge and needs long time to clean up, but I made
> > http://mercurial.intuxication.org/hg/s2-liplianin
> > in order to help to convert it.
> > Right now I state the code is stable and works absolutely of no difference with multiproto
> > version.
> > I mean it locks all channels, which multiproto version locks, but without any modifications to
> > current DVB API.
> > What can I do now?
> >
> > Igor
> 
> Thx a lot. It works fine. I'm voting for merge your tree to v4l-dvb.

me too

I can confirm that on our Russian dvb-linux forum there's only good reports about
http://mercurial.intuxication.org/hg/s2-liplianin from owners who have stb0899 and cx24116 based cards

@Igor
thanks a lot for your contribution  

Goga

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] stb0899 drivers

[Gregoire Favre]

On Thu, Oct 23, 2008 at 08:53:38PM +0400, Goga777 wrote:

What's the change from v4l-dvb ?

> I can confirm that on our Russian dvb-linux forum there's only good reports about
> http://mercurial.intuxication.org/hg/s2-liplianin from owners who have stb0899 and cx24116 based cards

-- 
Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org
               http://picasaweb.google.com/Gregoire.Favre

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] stb0899 drivers

[Goga777]

in v4l-dvb there's not support for stb0899 card yet

> What's the change from v4l-dvb ?
> 
> > I can confirm that on our Russian dvb-linux forum there's only good reports about
> > http://mercurial.intuxication.org/hg/s2-liplianin from owners who have stb0899 and cx24116 based cards
>

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] stb0899 drivers

[Bitte_antworten]

Hi Igor,

I tried your tree with my Pinnacle PCTV Sat HDTV Pro USB (PCTV452e) and it works with the modified szap.
Unfortunately my Terratec CinergyT2 doesn't work anymore. I can't load the modul because of many undefined symbols. So I reverted everything to multiproto and both devices are working again. What should I do? 
Thanks 
Dirk

-------- Original-Nachricht --------
> Datum: Thu, 23 Oct 2008 20:53:38 +0400
> Von: Goga777 <goga777@bk.ru>
> An: 
> CC: linux-dvb@linuxtv.org
> Betreff: Re: [linux-dvb] stb0899 drivers

> Приветствую, oleg
> > 2008/10/23 Igor M. Liplianin <liplianin@tut.by>:
> > > Hi Steven and Mauro
> > >
> > > As I understand, now we all waiting (again!) for Manu Abraham to
> commit?
> > > Truly his code are huge and needs long time to clean up, but I made
> > > http://mercurial.intuxication.org/hg/s2-liplianin
> > > in order to help to convert it.
> > > Right now I state the code is stable and works absolutely of no
> difference with multiproto
> > > version.
> > > I mean it locks all channels, which multiproto version locks, but
> without any modifications to
> > > current DVB API.
> > > What can I do now?
> > >
> > > Igor
> > 
> > Thx a lot. It works fine. I'm voting for merge your tree to v4l-dvb.
> 
> me too
> 
> I can confirm that on our Russian dvb-linux forum there's only good
> reports about
> http://mercurial.intuxication.org/hg/s2-liplianin from owners who have
> stb0899 and cx24116 based cards
> 
> @Igor
> thanks a lot for your contribution  
> 
> Goga
> 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

-- 
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[linux-dvb] cinergyT2 renamed drivers (was Re: stb0899 drivers)

[Dominik Kuhlen]

[-- Attachment #1.1: Type: text/plain, Size: 513 bytes --]

Hi,
On Saturday 25 October 2008, Bitte_antworten@will-hier-weg.de wrote:
> Hi Igor,
> 
> I tried your tree with my Pinnacle PCTV Sat HDTV Pro USB (PCTV452e) and it works with the modified szap.
> Unfortunately my Terratec CinergyT2 doesn't work anymore. I can't load the modul because of many undefined symbols. So I reverted everything to multiproto and both devices are working again. What should I do? 
the module name has changed to
dvb-usb-cinergyT2

> Thanks 
> Dirk
> 
---snip---


Dominik

[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] cinergyT2 renamed drivers (was Re: stb0899 drivers)

[Bitte_antworten]

Thanks Dominik, I found it out yesterday. The CinergyT2 is working fine now, but it is nearly impossible to use the PCTV452e with (an unmodified) kaffeine. It simply doesn't lock in more than 90% of my tests. The only channel that works sometimes is "Das Erste" and the lock takes appr. 1 minute.
So I reverted to multiproto again which works fine (except "NDR")
Dirk
-------- Original-Nachricht --------
> Datum: Sat, 25 Oct 2008 17:11:59 +0200
> Von: Dominik Kuhlen <dkuhlen@gmx.net>
> An: linux-dvb@linuxtv.org
> Betreff: [linux-dvb] cinergyT2 renamed drivers (was Re:  stb0899 drivers)

> Hi,
> On Saturday 25 October 2008, Bitte_antworten@will-hier-weg.de wrote:
> > Hi Igor,
> > 
> > I tried your tree with my Pinnacle PCTV Sat HDTV Pro USB (PCTV452e) and
> it works with the modified szap.
> > Unfortunately my Terratec CinergyT2 doesn't work anymore. I can't load
> the modul because of many undefined symbols. So I reverted everything to
> multiproto and both devices are working again. What should I do? 
> the module name has changed to
> dvb-usb-cinergyT2
> 
> > Thanks 
> > Dirk
> > 
> ---snip---
> 
> 
> Dominik

-- 
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] cinergyT2 renamed drivers (was Re: stb0899 drivers)

[Faruk A]

On Mon, Oct 27, 2008 at 3:02 PM,  <Bitte_antworten@will-hier-weg.de> wrote:
> Thanks Dominik, I found it out yesterday. The CinergyT2 is working fine now, but it is nearly impossible to use the PCTV452e with (an unmodified) kaffeine. It simply doesn't lock in more than 90% of my tests. The only channel that works sometimes is "Das Erste" and the lock takes appr. 1 minute.
> So I reverted to multiproto again which works fine (except "NDR")
> Dirk

Hi!

Try this since Dominik's patch not included in Igor's repo, you should
get faster locks on all your channels.

hg clone -r 9263 http://mercurial.intuxication.org/hg/s2-liplianin
wget http://hem.passagen.se/faruks/3650/my_s2api_pctv452e.txt
cd s2-liplianin
patch -p1 < ../my_s2api_pctv452e.txt
make ; # there might be a few warnings.
cd v4l
insmod dvb-core.ko
insmod stb6100.ko verbose=0
insmod stb0899.ko verbose=0
insmod lnbp22.ko
insmod ttpci-eeprom.ko
insmod dvb-usb.ko
insmod dvb-usb-pctv452e.ko


Faruk

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] stb0899 drivers

[Michel Verbraak]

Igor M. Liplianin schreef:
> Hi Steven and Mauro
>
> As I understand, now we all waiting (again!) for Manu Abraham to commit?
> Truly his code are huge and needs long time to clean up, but I made 
> http://mercurial.intuxication.org/hg/s2-liplianin 
> in order to help to convert it.
> Right now I state the code is stable and works absolutely of no difference with multiproto 
> version.
> I mean it locks all channels, which multiproto version locks, but without any modifications to 
> current DVB API.
> What can I do now?
>
> Igor
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>   
Igor,

I have tested your tree and can confirm the following. This is tested 
with a Technisat HD2 (0x0003 version).

Card is detected:
Oct 29 20:05:55 recorder kernel: ACPI: PCI Interrupt 0000:02:09.0[A] -> 
GSI 21 (level, low) -> IRQ 21
Oct 29 20:05:55 recorder kernel: irq: 21, latency: 64
Oct 29 20:05:55 recorder kernel:  memory: 0xf1bff000, mmio: 0xf89fe000
Oct 29 20:05:55 recorder kernel: found a VP-1041 PCI DSS/DVB-S/DVB-S2 
device on (02:09.0),
Oct 29 20:05:55 recorder kernel:     Mantis Rev 1 [1ae4:0003], irq: 21, 
latency: 64
Oct 29 20:05:55 recorder kernel:     memory: 0xf1bff000, mmio: 0xf89fe000
Oct 29 20:05:55 recorder kernel:     MAC Address=[00:08:c9:e0:3c:de]
Oct 29 20:05:55 recorder kernel: mantis_alloc_buffers (0): 
DMA=0x34b10000 cpu=0xf4b10000 size=65536
Oct 29 20:05:55 recorder kernel: mantis_alloc_buffers (0): 
RISC=0x36e95000 cpu=0xf6e95000 size=1000
Oct 29 20:05:55 recorder kernel: DVB: registering new adapter (Mantis 
dvb adapter)
Oct 29 20:05:55 recorder kernel: stb0899_attach: Attaching STB0899
Oct 29 20:05:55 recorder kernel: mantis_frontend_init (0): found STB0899 
DVB-S/DVB-S2 frontend @0x68
Oct 29 20:05:55 recorder kernel: stb6100_attach: Attaching STB6100
Oct 29 20:05:55 recorder kernel: DVB: registering adapter 6 frontend 0 
(STB0899 Multistandard)...
Oct 29 20:05:55 recorder kernel: mantis_ca_init (0): Registering EN50221 
device
Oct 29 20:05:55 recorder kernel: mantis_ca_init (0): Registered EN50221 
device
Oct 29 20:05:55 recorder kernel: mantis_hif_init (0): Adapter(0) 
Initializing Mantis Host Interface

Scanning with scan-s2 works but not all channels are found. Tested on 
Astra 28.2 (839 channels found) and Astra 19.2 (896 channels found). On 
the 28.2 I'm missing BBC 1 to 4 for example and on Astra 19.2 the Dutch 
channels. This is probably not a problem of scan-s2 but the driver.

Zapping with szap-s2 works for the channels found by scan-s2. I get data 
on vdr0 and it can be viewed by xine or mplayer. I can even get a lock 
on "BBC London 1" with manual set settings, not found by scan-s2, but I 
do not get any data on vdr0 device. This is logged in /var/log/messages

Oct 30 21:21:25 recorder kernel: mantis start feed & dma
Oct 30 21:21:25 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
Oct 30 21:21:25 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:25 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:25 recorder kernel: stb6100_set_frequency: Frequency=1023000
Oct 30 21:21:25 recorder kernel: stb6100_get_frequency: Frequency=1022994
Oct 30 21:21:25 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:25 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
Oct 30 21:21:25 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:25 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:25 recorder kernel: stb6100_set_frequency: Frequency=1023000
Oct 30 21:21:26 recorder kernel: stb6100_get_frequency: Frequency=1022994
Oct 30 21:21:26 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:26 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
Oct 30 21:21:26 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:26 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:26 recorder kernel: stb6100_set_frequency: Frequency=1023000
Oct 30 21:21:26 recorder kernel: stb6100_get_frequency: Frequency=1022994
Oct 30 21:21:26 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:26 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
Oct 30 21:21:26 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:26 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:27 recorder kernel: stb6100_set_frequency: Frequency=1023000
Oct 30 21:21:27 recorder kernel: stb6100_get_frequency: Frequency=1022994
Oct 30 21:21:27 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:27 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
Oct 30 21:21:27 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:27 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:27 recorder kernel: stb6100_set_frequency: Frequency=1023000
Oct 30 21:21:27 recorder kernel: stb6100_get_frequency: Frequency=1022994
Oct 30 21:21:27 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:27 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
Oct 30 21:21:28 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:28 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:28 recorder kernel: stb6100_set_frequency: Frequency=1023000
Oct 30 21:21:28 recorder kernel: stb6100_get_frequency: Frequency=1022994
Oct 30 21:21:28 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:28 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
Oct 30 21:21:28 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:28 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:28 recorder kernel: stb6100_set_frequency: Frequency=1023000
Oct 30 21:21:28 recorder kernel: stb6100_get_frequency: Frequency=1022994
Oct 30 21:21:28 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:29 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
Oct 30 21:21:29 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:29 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:29 recorder kernel: stb6100_set_frequency: Frequency=1023000
Oct 30 21:21:29 recorder kernel: stb6100_get_frequency: Frequency=1022994
Oct 30 21:21:29 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
Oct 30 21:21:36 recorder kernel: mantis stop feed and dma

I have a rotor connected and it can be controlled by the normal diseqc 
commands. I have my own application which worked with the old api and it 
does still work. So I'm able to rotate it.

I can confirm that it partially works but the only problem for me is 
that it does not find all the channels on the satellites.

Regards,

Michel.


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] stb0899 drivers

[Michel Verbraak]

[-- Attachment #1.1: Type: text/plain, Size: 7480 bytes --]

Michel Verbraak schreef:
> Igor M. Liplianin schreef:
>   
>> Hi Steven and Mauro
>>
>> As I understand, now we all waiting (again!) for Manu Abraham to commit?
>> Truly his code are huge and needs long time to clean up, but I made 
>> http://mercurial.intuxication.org/hg/s2-liplianin 
>> in order to help to convert it.
>> Right now I state the code is stable and works absolutely of no difference with multiproto 
>> version.
>> I mean it locks all channels, which multiproto version locks, but without any modifications to 
>> current DVB API.
>> What can I do now?
>>
>> Igor
>>
>> _______________________________________________
>> linux-dvb mailing list
>> linux-dvb@linuxtv.org
>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>   
>>     
> Igor,
>
> I have tested your tree and can confirm the following. This is tested 
> with a Technisat HD2 (0x0003 version).
>
> Card is detected:
> Oct 29 20:05:55 recorder kernel: ACPI: PCI Interrupt 0000:02:09.0[A] -> 
> GSI 21 (level, low) -> IRQ 21
> Oct 29 20:05:55 recorder kernel: irq: 21, latency: 64
> Oct 29 20:05:55 recorder kernel:  memory: 0xf1bff000, mmio: 0xf89fe000
> Oct 29 20:05:55 recorder kernel: found a VP-1041 PCI DSS/DVB-S/DVB-S2 
> device on (02:09.0),
> Oct 29 20:05:55 recorder kernel:     Mantis Rev 1 [1ae4:0003], irq: 21, 
> latency: 64
> Oct 29 20:05:55 recorder kernel:     memory: 0xf1bff000, mmio: 0xf89fe000
> Oct 29 20:05:55 recorder kernel:     MAC Address=[00:08:c9:e0:3c:de]
> Oct 29 20:05:55 recorder kernel: mantis_alloc_buffers (0): 
> DMA=0x34b10000 cpu=0xf4b10000 size=65536
> Oct 29 20:05:55 recorder kernel: mantis_alloc_buffers (0): 
> RISC=0x36e95000 cpu=0xf6e95000 size=1000
> Oct 29 20:05:55 recorder kernel: DVB: registering new adapter (Mantis 
> dvb adapter)
> Oct 29 20:05:55 recorder kernel: stb0899_attach: Attaching STB0899
> Oct 29 20:05:55 recorder kernel: mantis_frontend_init (0): found STB0899 
> DVB-S/DVB-S2 frontend @0x68
> Oct 29 20:05:55 recorder kernel: stb6100_attach: Attaching STB6100
> Oct 29 20:05:55 recorder kernel: DVB: registering adapter 6 frontend 0 
> (STB0899 Multistandard)...
> Oct 29 20:05:55 recorder kernel: mantis_ca_init (0): Registering EN50221 
> device
> Oct 29 20:05:55 recorder kernel: mantis_ca_init (0): Registered EN50221 
> device
> Oct 29 20:05:55 recorder kernel: mantis_hif_init (0): Adapter(0) 
> Initializing Mantis Host Interface
>
> Scanning with scan-s2 works but not all channels are found. Tested on 
> Astra 28.2 (839 channels found) and Astra 19.2 (896 channels found). On 
> the 28.2 I'm missing BBC 1 to 4 for example and on Astra 19.2 the Dutch 
> channels. This is probably not a problem of scan-s2 but the driver.
>
> Zapping with szap-s2 works for the channels found by scan-s2. I get data 
> on vdr0 and it can be viewed by xine or mplayer. I can even get a lock 
> on "BBC London 1" with manual set settings, not found by scan-s2, but I 
> do not get any data on vdr0 device. This is logged in /var/log/messages
>
> Oct 30 21:21:25 recorder kernel: mantis start feed & dma
> Oct 30 21:21:25 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
> Oct 30 21:21:25 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:25 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:25 recorder kernel: stb6100_set_frequency: Frequency=1023000
> Oct 30 21:21:25 recorder kernel: stb6100_get_frequency: Frequency=1022994
> Oct 30 21:21:25 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:25 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
> Oct 30 21:21:25 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:25 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:25 recorder kernel: stb6100_set_frequency: Frequency=1023000
> Oct 30 21:21:26 recorder kernel: stb6100_get_frequency: Frequency=1022994
> Oct 30 21:21:26 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:26 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
> Oct 30 21:21:26 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:26 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:26 recorder kernel: stb6100_set_frequency: Frequency=1023000
> Oct 30 21:21:26 recorder kernel: stb6100_get_frequency: Frequency=1022994
> Oct 30 21:21:26 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:26 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
> Oct 30 21:21:26 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:26 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:27 recorder kernel: stb6100_set_frequency: Frequency=1023000
> Oct 30 21:21:27 recorder kernel: stb6100_get_frequency: Frequency=1022994
> Oct 30 21:21:27 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:27 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
> Oct 30 21:21:27 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:27 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:27 recorder kernel: stb6100_set_frequency: Frequency=1023000
> Oct 30 21:21:27 recorder kernel: stb6100_get_frequency: Frequency=1022994
> Oct 30 21:21:27 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:27 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
> Oct 30 21:21:28 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:28 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:28 recorder kernel: stb6100_set_frequency: Frequency=1023000
> Oct 30 21:21:28 recorder kernel: stb6100_get_frequency: Frequency=1022994
> Oct 30 21:21:28 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:28 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
> Oct 30 21:21:28 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:28 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:28 recorder kernel: stb6100_set_frequency: Frequency=1023000
> Oct 30 21:21:28 recorder kernel: stb6100_get_frequency: Frequency=1022994
> Oct 30 21:21:28 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:29 recorder kernel: stb6100_set_bandwidth: Bandwidth=51610000
> Oct 30 21:21:29 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:29 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:29 recorder kernel: stb6100_set_frequency: Frequency=1023000
> Oct 30 21:21:29 recorder kernel: stb6100_get_frequency: Frequency=1022994
> Oct 30 21:21:29 recorder kernel: stb6100_get_bandwidth: Bandwidth=52000000
> Oct 30 21:21:36 recorder kernel: mantis stop feed and dma
>
> I have a rotor connected and it can be controlled by the normal diseqc 
> commands. I have my own application which worked with the old api and it 
> does still work. So I'm able to rotate it.
>
> I can confirm that it partially works but the only problem for me is 
> that it does not find all the channels on the satellites.
>
> Regards,
>
> Michel.
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>   
I have to correct myself. The Diseqc rotor control, USALS, is not 
stable. After I rebooted the system it will not rotate my rotor anymore. 
Still testing.

Michel.

[-- Attachment #1.2: Type: text/html, Size: 8085 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb