Re: [linux-dvb] [ANNOUNCE] scan-s2 is available, please test

[Goga777 <goga777@bk.ru>]

Приветствую, Michel

but cx24116 based cards don't work with fec=auto for dvb-s2 

I'm not sure - may be for cx24116 cards the parameters roll off & modulation are obligatory (not optional)



> Tested your scan-s2 with a Technisat HD2 card.
> 
> Scanning works. But some channels are reported twice with different 
> frequency. I found an error which is fixed by the patch file named 
> scan.c.diff1.
> 
> I would also like to propose the following change (see file scan.c.diff2 
> or scan.c.diff which includes both patches). This change makes it 
> possible to only scan for DVB-S channels or DVB-S2 channels or both. 
> This is done by specifying lines starting with S or S2 in the input file.
> 
> example input file:
> # Astra 19.2E SDT info service transponder
> # freq pol sr fec
> S 12522000 H 22000000 2/3       <only DVB-S channels are scanned>
> S 11914000 H 27500000 AUTO
> S 10743750 H 22000000 5/6
> S 12187500 H 27500000 3/4
> S 12343500 H 27500000 3/4
> S 12515250 H 22000000 5/6
> S 12574250 H 22000000 5/6
> S2 12522000 H 22000000 AUTO    <only DVB-S2 channels are scanned>
> S2 11914000 H 27500000 AUTO
> 
> I hope this is usefull.
> 
> Regards,
> 
> Michel.


-- 
Удачи,
Игорь

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb