* [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem
@ 2008-11-03 10:51 Kovacs Balazs
2008-11-03 12:04 ` Alex Betis
2008-11-03 12:59 ` Goga777
0 siblings, 2 replies; 15+ messages in thread
From: Kovacs Balazs @ 2008-11-03 10:51 UTC (permalink / raw)
To: linux-dvb
Hi All!
I tried a few variation, but without any success:
I try to lock (stable! :)) on our new transponders at Amos 4W:
10,723(V) GHz, DVB-S2/8PSK, SR:30000, FEC:2/3, MPEG-4/Conax
10,759(V) GHz, DVB-S2/8PSK, SR:30000, FEC:2/3, MPEG-4/Conax
10,842(V) GHz, DVB-S2/8PSK, SR:30000, FEC:2/3, MPEG-4/Conax
with a TT3200 card + Debian etch with 2.4.24 etchnhalf kernel + the current V4L-DVB mercurial drivers compiled.
The drivers recognizes my card, and for example it works good with Premiere's S2 transponders at Astra 19.2E.
But it won't lock stable on our Amos's transponders.
FYI: on these TP's there's a pilot signal and rolloff set to 0.20. I tried to push these parameters to scan-s2 and szap-s2, but scan-s2 sometimes lock and sometimes won't on these transponders and also szap-s2 (after a few try to lock with scan-s2 and get the channels.conf from these transponders) sometimes locks, but it's not stable, it lost lock after a few seconds.
What I recognized also: if i run szap-s2 on our transponders it gives me the status message lines much slower than on other TP's.
it almost always looks like this:
/usr/src/dvb/s2api/szap-s2# ./szap-s2-thome.sh
reading channels from file '/root/.szap/channels.conf'
zapping to 1 '1':
delivery DVB-S2, modulation 8PSK
sat 0, frequency 10723 MHz V, symbolrate 30000000, coderate 2/3, rolloff 0.20
vpid 0x00b3, apid 0x00b1, sid 0x00b4
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal 00b1 | snr 0000 | ber 00000000 | unc fffffffe |
status 00 | signal 00b1 | snr 0000 | ber 00000000 | unc fffffffe |
status 00 | signal 00b1 | snr 0000 | ber 00000000 | unc fffffffe |
status 00 | signal 00b1 | snr 0000 | ber 00000000 | unc fffffffe |
status 00 | signal 00b1 | snr 0000 | ber 00000000 | unc fffffffe |
status 00 | signal 00b1 | snr 0000 | ber 00000000 | unc fffffffe |
status 00 | signal 00b1 | snr 0000 | ber 00000000 | unc fffffffe |
but sometimes it can lock, very rare...
please, help me.
thanks,
Basq
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem
2008-11-03 10:51 [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem Kovacs Balazs
@ 2008-11-03 12:04 ` Alex Betis
2008-11-03 12:59 ` Goga777
1 sibling, 0 replies; 15+ messages in thread
From: Alex Betis @ 2008-11-03 12:04 UTC (permalink / raw)
To: Kovacs Balazs; +Cc: linux-dvb
[-- Attachment #1.1: Type: text/plain, Size: 2726 bytes --]
I have Twinhan 1041, same chipset as your card and I have the same behavior
with S2 channels.
Some can be locked, some can't. I think it's a known issue with stb0899
chips, I mean known here in the list.
Hope someone will be able to fix that. DVB-S2 scannint and locking is done
in the chip itself, so without knowledge of chip
internals it will be very hard to resolve that issue.
On Mon, Nov 3, 2008 at 12:51 PM, Kovacs Balazs <basq@bitklub.hu> wrote:
> Hi All!
>
> I tried a few variation, but without any success:
>
> I try to lock (stable! :)) on our new transponders at Amos 4W:
>
> 10,723(V) GHz, DVB-S2/8PSK, SR:30000, FEC:2/3, MPEG-4/Conax
> 10,759(V) GHz, DVB-S2/8PSK, SR:30000, FEC:2/3, MPEG-4/Conax
> 10,842(V) GHz, DVB-S2/8PSK, SR:30000, FEC:2/3, MPEG-4/Conax
>
> with a TT3200 card + Debian etch with 2.4.24 etchnhalf kernel + the current
> V4L-DVB mercurial drivers compiled.
>
> The drivers recognizes my card, and for example it works good with
> Premiere's S2 transponders at Astra 19.2E.
>
> But it won't lock stable on our Amos's transponders.
>
> FYI: on these TP's there's a pilot signal and rolloff set to 0.20. I tried
> to push these parameters to scan-s2 and szap-s2, but scan-s2 sometimes lock
> and sometimes won't on these transponders and also szap-s2 (after a few try
> to lock with scan-s2 and get the channels.conf from these transponders)
> sometimes locks, but it's not stable, it lost lock after a few seconds.
>
> What I recognized also: if i run szap-s2 on our transponders it gives me
> the status message lines much slower than on other TP's.
>
> it almost always looks like this:
>
> /usr/src/dvb/s2api/szap-s2# ./szap-s2-thome.sh
> reading channels from file '/root/.szap/channels.conf'
> zapping to 1 '1':
> delivery DVB-S2, modulation 8PSK
> sat 0, frequency 10723 MHz V, symbolrate 30000000, coderate 2/3, rolloff
> 0.20
> vpid 0x00b3, apid 0x00b1, sid 0x00b4
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> status 00 | signal 00b1 | snr 0000 | ber 00000000 | unc fffffffe |
> status 00 | signal 00b1 | snr 0000 | ber 00000000 | unc fffffffe |
> status 00 | signal 00b1 | snr 0000 | ber 00000000 | unc fffffffe |
> status 00 | signal 00b1 | snr 0000 | ber 00000000 | unc fffffffe |
> status 00 | signal 00b1 | snr 0000 | ber 00000000 | unc fffffffe |
> status 00 | signal 00b1 | snr 0000 | ber 00000000 | unc fffffffe |
> status 00 | signal 00b1 | snr 0000 | ber 00000000 | unc fffffffe |
>
> but sometimes it can lock, very rare...
>
> please, help me.
>
> thanks,
>
> Basq
>
>
>
>
>
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
[-- Attachment #1.2: Type: text/html, Size: 3342 bytes --]
[-- Attachment #2: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem
2008-11-03 10:51 [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem Kovacs Balazs
2008-11-03 12:04 ` Alex Betis
@ 2008-11-03 12:59 ` Goga777
2008-11-04 8:00 ` Kovacs Balazs
1 sibling, 1 reply; 15+ messages in thread
From: Goga777 @ 2008-11-03 12:59 UTC (permalink / raw)
To: linux-dvb
> FYI: on these TP's there's a pilot signal and rolloff set to 0.20.
I'm wondering - how did you observe it ?
Goga
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem
2008-11-03 12:59 ` Goga777
@ 2008-11-04 8:00 ` Kovacs Balazs
2008-11-04 9:08 ` oleg roitburd
2008-11-04 9:18 ` [linux-dvb] " Ales Jurik
0 siblings, 2 replies; 15+ messages in thread
From: Kovacs Balazs @ 2008-11-04 8:00 UTC (permalink / raw)
To: Goga777; +Cc: linux-dvb@linuxtv.org
>> FYI: on these TP's there's a pilot signal and rolloff set to 0.20.
> I'm wondering - how did you observe it ?
I asked my colleagues who set up this modulator at uplink site, because we are working on these satellite DTH system.
Is anybody can suggest a working DVB-S2 card + linux driver which is capable to lock here stable? (AMOS 4.0W, 10.723Ghz V, 30000)
thank you,
basq
> Goga
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem
2008-11-04 8:00 ` Kovacs Balazs
@ 2008-11-04 9:08 ` oleg roitburd
2008-11-04 9:31 ` Alex Betis
[not found] ` <4a5931310811040335i7722125fwc0efefbf01cac93d@mail.gmail.com>
2008-11-04 9:18 ` [linux-dvb] " Ales Jurik
1 sibling, 2 replies; 15+ messages in thread
From: oleg roitburd @ 2008-11-04 9:08 UTC (permalink / raw)
To: Kovacs Balazs; +Cc: linux-dvb@linuxtv.org
I have decreased frequenz ( -4MHz)
And I can scan both transpoders with SR 30000
[0001];:10719:vS1C23M5:S0.0W:30000:179:177=hun:180:0:1:0:0:0
[0002];:10719:vS1C23M5:S0.0W:30000:174:172=hun:175:0:2:0:0:0
[0003];:10719:vS1C23M5:S0.0W:30000:169:0:170:0:3:0:0:0
[0004];:10719:vS1C23M5:S0.0W:30000:164:0:165:0:4:0:0:0
[0005];:10719:vS1C23M5:S0.0W:30000:159:0:0:0:5:0:0:0
[0006];:10719:vS1C23M5:S0.0W:30000:154:0:0:0:6:0:0:0
[0007];:10719:vS1C23M5:S0.0W:30000:149:0:0:0:7:0:0:0
[0008];:10719:vS1C23M5:S0.0W:30000:144:0:0:0:8:0:0:0
[000a];:10719:vS1C23M5:S0.0W:30000:134:0:0:0:10:0:0:0
[000b];:10719:vS1C23M5:S0.0W:30000:129:0:0:0:11:0:0:0
[000c];:10719:vS1C23M5:S0.0W:30000:124:0:0:0:12:0:0:0
[000e];:10719:vS1C23M5:S0.0W:30000:114:0:0:0:14:0:0:0
[000f];:10719:vS1C23M5:S0.0W:30000:109:0:0:0:15:0:0:0
[0010];:10719:vS1C23M5:S0.0W:30000:104:0:0:0:16:0:0:0
[0011];:10719:vS1C23M5:S0.0W:30000:99:0:0:0:17:0:0:0
[0012];:10719:vS1C23M5:S0.0W:30000:94:0:0:0:18:0:0:0
[0013];:10719:vS1C23M5:S0.0W:30000:89:0:0:0:19:0:0:0
[0014];:10719:vS1C23M5:S0.0W:30000:84:0:0:0:20:0:0:0
[0015];:10719:vS1C23M5:S0.0W:30000:79:0:0:0:21:0:0:0
[0016];:10719:vS1C23M5:S0.0W:30000:74:0:0:0:22:0:0:0
[0017];:10719:vS1C23M5:S0.0W:30000:69:0:0:0:23:0:0:0
[0018];:10719:vS1C23M5:S0.0W:30000:64:0:0:0:24:0:0:0
[0019];:10719:vS1C23M5:S0.0W:30000:59:0:0:0:25:0:0:0
[001a];:10719:vS1C23M5:S0.0W:30000:54:0:0:0:26:0:0:0
[001d];:10719:vS1C23M5:S0.0W:30000:39:0:0:0:29:0:0:0
[001e];:10719:vS1C23M5:S0.0W:30000:34:0:0:0:30:0:0:0
[001f];:10754:vS1C23M5:S0.0W:30000:90:0:0:0:31:0:0:0
[0020];:10754:vS1C23M5:S0.0W:30000:85:0:0:0:32:0:0:0
[0021];:10754:vS1C23M5:S0.0W:30000:80:0:0:0:33:0:0:0
[0023];:10754:vS1C23M5:S0.0W:30000:70:0:71:0:35:0:0:0
[0024];:10754:vS1C23M5:S0.0W:30000:65:0:66:0:36:0:0:0
[0025];:10754:vS1C23M5:S0.0W:30000:60:0:0:0:37:0:0:0
[0026];:10754:vS1C23M5:S0.0W:30000:55:0:0:0:38:0:0:0
[0065];:10754:vS1C23M5:S0.0W:30000:46:44=hun:0:0:101:0:0:0
[0066];:10754:vS1C23M5:S0.0W:30000:42:40=eng:0:0:102:0:0:0
[0067];:10754:vS1C23M5:S0.0W:30000:38:36;36:0:0:103:0:0:0
[0068];:10754:vS1C23M5:S0.0W:30000:34:32=eng:0:0:104:0:0:0
It's old bug and old quick&dirty trick. My card is TT S2-3200
Regards
Oleg Roitburd
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem
2008-11-04 8:00 ` Kovacs Balazs
2008-11-04 9:08 ` oleg roitburd
@ 2008-11-04 9:18 ` Ales Jurik
2008-11-06 8:01 ` Kovacs Balazs
1 sibling, 1 reply; 15+ messages in thread
From: Ales Jurik @ 2008-11-04 9:18 UTC (permalink / raw)
To: linux-dvb
On Tuesday 04 of November 2008, Kovacs Balazs wrote:
> >> FYI: on these TP's there's a pilot signal and rolloff set to 0.20.
> >
> > I'm wondering - how did you observe it ?
>
> I asked my colleagues who set up this modulator at uplink site, because we
> are working on these satellite DTH system.
>
> Is anybody can suggest a working DVB-S2 card + linux driver which is
> capable to lock here stable? (AMOS 4.0W, 10.723Ghz V, 30000)
>
> thank you,
>
> basq
I don't have any problem with lock with my last dvb-liplianin drivers
(multiproto) and HVR-4000.
But the rolloff is automatically set by the driver to 0.35.
Here is the automatically done scan from vdr-1.7.0. I've edited the rolloff to
0.20 but it doesn't seems to heave any influence even if I disable update of
channels.
The video on FTA channels is something like not fluent (only RTL doesn't have
this problem) - but it could be that no sound one that channels is
broadcasted.
BR,
Ales
RTL Klub;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:179:177=hun:180:B00:1:100:1:0
tv2;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:174:172=hun:175:B00:2:100:1:0
m1;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:169:0:170:B00:3:100:1:0
m2;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:164:0:165:B00:4:100:1:0
TV Deko;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:159:0:0:B00:5:100:1:0
TV Paprika;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:154:0:0:B00:6:100:1:0
Kidsco;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:149:0:0:B00:7:100:1:0
Minimax;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:144:0:0:B00:8:100:1:0
XXXtreme;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:0:0:0:0:9:100:1:0
MTV Hungary;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:134:0:0:B00:10:100:1:0
VH1;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:129:0:0:B00:11:100:1:0
Magyar ATV;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:124:0:0:B00:12:100:1:0
Playboy TV;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:0:0:0:0:13:100:1:0
Echo TV;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:114:0:0:B00:14:100:1:0
HÆlðzat TV;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:109:0:0:B00:15:100:1:0
MTV2;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:104:0:0:B00:16:100:1:0
Reflektor;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:99:0:0:B00:17:100:1:0
film2+;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:94:0:0:B00:18:100:1:0
Cool;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:89:0:0:B00:19:100:1:0
PoØn;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:84:0:0:B00:20:100:1:0
sorozat+;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:79:0:0:B00:21:100:1:0
film+;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:74:0:0:B00:22:100:1:0
Fishing and
Hunting;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:69:0:0:B00:23:100:1:0
Sport Klub;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:64:0:0:B00:24:100:1:0
Sport Klub+;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:59:0:0:B00:25:100:1:0
Doq;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:54:0:0:B00:26:100:1:0
test1;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:0:0:0:0:27:100:1:0
test2;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:0:0:0:0:28:100:1:0
test3;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:39:0:0:B00:29:100:1:0
HŦr TV;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:34:0:0:B00:30:100:1:0
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem
2008-11-04 9:08 ` oleg roitburd
@ 2008-11-04 9:31 ` Alex Betis
2008-11-04 12:45 ` Kovacs Balazs
[not found] ` <4a5931310811040335i7722125fwc0efefbf01cac93d@mail.gmail.com>
1 sibling, 1 reply; 15+ messages in thread
From: Alex Betis @ 2008-11-04 9:31 UTC (permalink / raw)
To: oleg roitburd; +Cc: linux-dvb@linuxtv.org
[-- Attachment #1.1: Type: text/plain, Size: 2682 bytes --]
Just to add my 2 cents, in lyngsat that transponder is shown as 10722 and
not 10723, so Oleg was probably not the only one who reduced the frequency
to lock on that channel.
On Tue, Nov 4, 2008 at 11:08 AM, oleg roitburd <oroitburd@gmail.com> wrote:
> I have decreased frequenz ( -4MHz)
> And I can scan both transpoders with SR 30000
>
> [0001];:10719:vS1C23M5:S0.0W:30000:179:177=hun:180:0:1:0:0:0
> [0002];:10719:vS1C23M5:S0.0W:30000:174:172=hun:175:0:2:0:0:0
> [0003];:10719:vS1C23M5:S0.0W:30000:169:0:170:0:3:0:0:0
> [0004];:10719:vS1C23M5:S0.0W:30000:164:0:165:0:4:0:0:0
> [0005];:10719:vS1C23M5:S0.0W:30000:159:0:0:0:5:0:0:0
> [0006];:10719:vS1C23M5:S0.0W:30000:154:0:0:0:6:0:0:0
> [0007];:10719:vS1C23M5:S0.0W:30000:149:0:0:0:7:0:0:0
> [0008];:10719:vS1C23M5:S0.0W:30000:144:0:0:0:8:0:0:0
> [000a];:10719:vS1C23M5:S0.0W:30000:134:0:0:0:10:0:0:0
> [000b];:10719:vS1C23M5:S0.0W:30000:129:0:0:0:11:0:0:0
> [000c];:10719:vS1C23M5:S0.0W:30000:124:0:0:0:12:0:0:0
> [000e];:10719:vS1C23M5:S0.0W:30000:114:0:0:0:14:0:0:0
> [000f];:10719:vS1C23M5:S0.0W:30000:109:0:0:0:15:0:0:0
> [0010];:10719:vS1C23M5:S0.0W:30000:104:0:0:0:16:0:0:0
> [0011];:10719:vS1C23M5:S0.0W:30000:99:0:0:0:17:0:0:0
> [0012];:10719:vS1C23M5:S0.0W:30000:94:0:0:0:18:0:0:0
> [0013];:10719:vS1C23M5:S0.0W:30000:89:0:0:0:19:0:0:0
> [0014];:10719:vS1C23M5:S0.0W:30000:84:0:0:0:20:0:0:0
> [0015];:10719:vS1C23M5:S0.0W:30000:79:0:0:0:21:0:0:0
> [0016];:10719:vS1C23M5:S0.0W:30000:74:0:0:0:22:0:0:0
> [0017];:10719:vS1C23M5:S0.0W:30000:69:0:0:0:23:0:0:0
> [0018];:10719:vS1C23M5:S0.0W:30000:64:0:0:0:24:0:0:0
> [0019];:10719:vS1C23M5:S0.0W:30000:59:0:0:0:25:0:0:0
> [001a];:10719:vS1C23M5:S0.0W:30000:54:0:0:0:26:0:0:0
> [001d];:10719:vS1C23M5:S0.0W:30000:39:0:0:0:29:0:0:0
> [001e];:10719:vS1C23M5:S0.0W:30000:34:0:0:0:30:0:0:0
> [001f];:10754:vS1C23M5:S0.0W:30000:90:0:0:0:31:0:0:0
> [0020];:10754:vS1C23M5:S0.0W:30000:85:0:0:0:32:0:0:0
> [0021];:10754:vS1C23M5:S0.0W:30000:80:0:0:0:33:0:0:0
> [0023];:10754:vS1C23M5:S0.0W:30000:70:0:71:0:35:0:0:0
> [0024];:10754:vS1C23M5:S0.0W:30000:65:0:66:0:36:0:0:0
> [0025];:10754:vS1C23M5:S0.0W:30000:60:0:0:0:37:0:0:0
> [0026];:10754:vS1C23M5:S0.0W:30000:55:0:0:0:38:0:0:0
> [0065];:10754:vS1C23M5:S0.0W:30000:46:44=hun:0:0:101:0:0:0
> [0066];:10754:vS1C23M5:S0.0W:30000:42:40=eng:0:0:102:0:0:0
> [0067];:10754:vS1C23M5:S0.0W:30000:38:36;36:0:0:103:0:0:0
> [0068];:10754:vS1C23M5:S0.0W:30000:34:32=eng:0:0:104:0:0:0
>
> It's old bug and old quick&dirty trick. My card is TT S2-3200
>
> Regards
> Oleg Roitburd
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
[-- Attachment #1.2: Type: text/html, Size: 3228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 15+ messages in thread
* [linux-dvb] Fwd: Re: S2API + TT3200 + Amos4w 10.723 S2 problem
[not found] ` <4a5931310811040335i7722125fwc0efefbf01cac93d@mail.gmail.com>
@ 2008-11-04 12:42 ` Kovacs Balazs
0 siblings, 0 replies; 15+ messages in thread
From: Kovacs Balazs @ 2008-11-04 12:42 UTC (permalink / raw)
To: linux-dvb@linuxtv.org
This is a forwarded message
From: Balazs Kovacs <basq@bitklub.hu>
To: "oleg roitburd" <oroitburd@gmail.com>
Date: Tuesday, November 4, 2008, 12:35:32 PM
Subject: [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem
===8<==============Original message text===============
Oleg, i use TT3200 also. Which kernel+drivers do you use? I tried
v4l-dvb but it sometimes scans sometimes not. It depends if it's able
to lock or not at the moment. It's not so stable. It's the same with
multiproto.
But i'm confused about driver repositories: there's the
v4l-dvb
http://mercurial.intuxication.org/hg/s2-liplianin
http://mercurial.intuxication.org/hg/liplianindvb/
http://www.jusst.de/hg/multiproto
http://www.jusst.de/hg/v4l-dvb/
but i don't know which is the multiproto, which is ported to s2api,
and which one should I use.
I tried to decrease the freqs but it doesn't help for me.
For all: I tried a few STB's and only STB's work where I can set up
the Pilot mode to ON. (we have a pilot signal)
What i really need is to zap to one of these transponder and locks stable on it.
2008/11/4 oleg roitburd <oroitburd@gmail.com>:
> I have decreased frequenz ( -4MHz)
> And I can scan both transpoders with SR 30000
> [0001];:10719:vS1C23M5:S0.0W:30000:179:177=hun:180:0:1:0:0:0
> [0002];:10719:vS1C23M5:S0.0W:30000:174:172=hun:175:0:2:0:0:0
> [0003];:10719:vS1C23M5:S0.0W:30000:169:0:170:0:3:0:0:0
> [0004];:10719:vS1C23M5:S0.0W:30000:164:0:165:0:4:0:0:0
> [0005];:10719:vS1C23M5:S0.0W:30000:159:0:0:0:5:0:0:0
> [0006];:10719:vS1C23M5:S0.0W:30000:154:0:0:0:6:0:0:0
> [0007];:10719:vS1C23M5:S0.0W:30000:149:0:0:0:7:0:0:0
> [0008];:10719:vS1C23M5:S0.0W:30000:144:0:0:0:8:0:0:0
> [000a];:10719:vS1C23M5:S0.0W:30000:134:0:0:0:10:0:0:0
> [000b];:10719:vS1C23M5:S0.0W:30000:129:0:0:0:11:0:0:0
> [000c];:10719:vS1C23M5:S0.0W:30000:124:0:0:0:12:0:0:0
> [000e];:10719:vS1C23M5:S0.0W:30000:114:0:0:0:14:0:0:0
> [000f];:10719:vS1C23M5:S0.0W:30000:109:0:0:0:15:0:0:0
> [0010];:10719:vS1C23M5:S0.0W:30000:104:0:0:0:16:0:0:0
> [0011];:10719:vS1C23M5:S0.0W:30000:99:0:0:0:17:0:0:0
> [0012];:10719:vS1C23M5:S0.0W:30000:94:0:0:0:18:0:0:0
> [0013];:10719:vS1C23M5:S0.0W:30000:89:0:0:0:19:0:0:0
> [0014];:10719:vS1C23M5:S0.0W:30000:84:0:0:0:20:0:0:0
> [0015];:10719:vS1C23M5:S0.0W:30000:79:0:0:0:21:0:0:0
> [0016];:10719:vS1C23M5:S0.0W:30000:74:0:0:0:22:0:0:0
> [0017];:10719:vS1C23M5:S0.0W:30000:69:0:0:0:23:0:0:0
> [0018];:10719:vS1C23M5:S0.0W:30000:64:0:0:0:24:0:0:0
> [0019];:10719:vS1C23M5:S0.0W:30000:59:0:0:0:25:0:0:0
> [001a];:10719:vS1C23M5:S0.0W:30000:54:0:0:0:26:0:0:0
> [001d];:10719:vS1C23M5:S0.0W:30000:39:0:0:0:29:0:0:0
> [001e];:10719:vS1C23M5:S0.0W:30000:34:0:0:0:30:0:0:0
> [001f];:10754:vS1C23M5:S0.0W:30000:90:0:0:0:31:0:0:0
> [0020];:10754:vS1C23M5:S0.0W:30000:85:0:0:0:32:0:0:0
> [0021];:10754:vS1C23M5:S0.0W:30000:80:0:0:0:33:0:0:0
> [0023];:10754:vS1C23M5:S0.0W:30000:70:0:71:0:35:0:0:0
> [0024];:10754:vS1C23M5:S0.0W:30000:65:0:66:0:36:0:0:0
> [0025];:10754:vS1C23M5:S0.0W:30000:60:0:0:0:37:0:0:0
> [0026];:10754:vS1C23M5:S0.0W:30000:55:0:0:0:38:0:0:0
> [0065];:10754:vS1C23M5:S0.0W:30000:46:44=hun:0:0:101:0:0:0
> [0066];:10754:vS1C23M5:S0.0W:30000:42:40=eng:0:0:102:0:0:0
> [0067];:10754:vS1C23M5:S0.0W:30000:38:36;36:0:0:103:0:0:0
> [0068];:10754:vS1C23M5:S0.0W:30000:34:32=eng:0:0:104:0:0:0
> It's old bug and old quick&dirty trick. My card is TT S2-3200
> Regards
> Oleg Roitburd
===8<===========End of original message text===========
--
Best regards,
Kovacs mailto:basq@bitklub.hu
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem
2008-11-04 9:31 ` Alex Betis
@ 2008-11-04 12:45 ` Kovacs Balazs
0 siblings, 0 replies; 15+ messages in thread
From: Kovacs Balazs @ 2008-11-04 12:45 UTC (permalink / raw)
To: linux-dvb@linuxtv.org
I tried almost all what I know:
v4l-dvb with szap-s2 and scan-s2
liplianin-dvb with older szap2
s2-liplianin with szap-s2 and scan-s2
and the results the same in almost all the case: sometimes locks, but it's very rare for me.
Maybe is it because of the 2.6.24 kernel? I don't know.
Please, somebody with TT3200 with success on these TP's reply me what version of driver + utilities (szap, scan) do you use?
thanks,
Basq
> Just to add my 2 cents, in lyngsat that transponder is shown as
> 10722 and not 10723, so Oleg was probably not the only one who
> reduced the frequency to lock on that channel.
> On Tue, Nov 4, 2008 at 11:08 AM, oleg roitburd <oroitburd@gmail.com> wrote:
> I have decreased frequenz ( -4MHz)
> And I can scan both transpoders with SR 30000
> [0001];:10719:vS1C23M5:S0.0W:30000:179:177=hun:180:0:1:0:0:0
> [0002];:10719:vS1C23M5:S0.0W:30000:174:172=hun:175:0:2:0:0:0
> [0003];:10719:vS1C23M5:S0.0W:30000:169:0:170:0:3:0:0:0
> [0004];:10719:vS1C23M5:S0.0W:30000:164:0:165:0:4:0:0:0
> [0005];:10719:vS1C23M5:S0.0W:30000:159:0:0:0:5:0:0:0
> [0006];:10719:vS1C23M5:S0.0W:30000:154:0:0:0:6:0:0:0
> [0007];:10719:vS1C23M5:S0.0W:30000:149:0:0:0:7:0:0:0
> [0008];:10719:vS1C23M5:S0.0W:30000:144:0:0:0:8:0:0:0
> [000a];:10719:vS1C23M5:S0.0W:30000:134:0:0:0:10:0:0:0
> [000b];:10719:vS1C23M5:S0.0W:30000:129:0:0:0:11:0:0:0
> [000c];:10719:vS1C23M5:S0.0W:30000:124:0:0:0:12:0:0:0
> [000e];:10719:vS1C23M5:S0.0W:30000:114:0:0:0:14:0:0:0
> [000f];:10719:vS1C23M5:S0.0W:30000:109:0:0:0:15:0:0:0
> [0010];:10719:vS1C23M5:S0.0W:30000:104:0:0:0:16:0:0:0
> [0011];:10719:vS1C23M5:S0.0W:30000:99:0:0:0:17:0:0:0
> [0012];:10719:vS1C23M5:S0.0W:30000:94:0:0:0:18:0:0:0
> [0013];:10719:vS1C23M5:S0.0W:30000:89:0:0:0:19:0:0:0
> [0014];:10719:vS1C23M5:S0.0W:30000:84:0:0:0:20:0:0:0
> [0015];:10719:vS1C23M5:S0.0W:30000:79:0:0:0:21:0:0:0
> [0016];:10719:vS1C23M5:S0.0W:30000:74:0:0:0:22:0:0:0
> [0017];:10719:vS1C23M5:S0.0W:30000:69:0:0:0:23:0:0:0
> [0018];:10719:vS1C23M5:S0.0W:30000:64:0:0:0:24:0:0:0
> [0019];:10719:vS1C23M5:S0.0W:30000:59:0:0:0:25:0:0:0
> [001a];:10719:vS1C23M5:S0.0W:30000:54:0:0:0:26:0:0:0
> [001d];:10719:vS1C23M5:S0.0W:30000:39:0:0:0:29:0:0:0
> [001e];:10719:vS1C23M5:S0.0W:30000:34:0:0:0:30:0:0:0
> [001f];:10754:vS1C23M5:S0.0W:30000:90:0:0:0:31:0:0:0
> [0020];:10754:vS1C23M5:S0.0W:30000:85:0:0:0:32:0:0:0
> [0021];:10754:vS1C23M5:S0.0W:30000:80:0:0:0:33:0:0:0
> [0023];:10754:vS1C23M5:S0.0W:30000:70:0:71:0:35:0:0:0
> [0024];:10754:vS1C23M5:S0.0W:30000:65:0:66:0:36:0:0:0
> [0025];:10754:vS1C23M5:S0.0W:30000:60:0:0:0:37:0:0:0
> [0026];:10754:vS1C23M5:S0.0W:30000:55:0:0:0:38:0:0:0
> [0065];:10754:vS1C23M5:S0.0W:30000:46:44=hun:0:0:101:0:0:0
> [0066];:10754:vS1C23M5:S0.0W:30000:42:40=eng:0:0:102:0:0:0
> [0067];:10754:vS1C23M5:S0.0W:30000:38:36;36:0:0:103:0:0:0
> [0068];:10754:vS1C23M5:S0.0W:30000:34:32=eng:0:0:104:0:0:0
> It's old bug and old quick&dirty trick. My card is TT S2-3200
> Regards
> Oleg Roitburd
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem
2008-11-04 9:18 ` [linux-dvb] " Ales Jurik
@ 2008-11-06 8:01 ` Kovacs Balazs
2008-11-06 9:11 ` Ales Jurik
0 siblings, 1 reply; 15+ messages in thread
From: Kovacs Balazs @ 2008-11-06 8:01 UTC (permalink / raw)
To: Ales Jurik; +Cc: linux-dvb
Ales, can you test me what happens if you just want to lock on these TP's? Is it stable for you?
Can you tun a szap and watch it if the card lost the lock or is it locked stable?
I've tried a Skystar HD2 card with s2-liplianin drivers but the result is the same. Sometimes I can scan the TP's if the card is locked for a 1-2 second period, then it losts the lock.
This could be a driver issue, because under Windows with the original TT WDM or BDA drivers the TT3200 works perfect on these TP's.
thanx,
basq
> On Tuesday 04 of November 2008, Kovacs Balazs wrote:
>> >> FYI: on these TP's there's a pilot signal and rolloff set to 0.20.
>> >
>> > I'm wondering - how did you observe it ?
>> I asked my colleagues who set up this modulator at uplink site, because we
>> are working on these satellite DTH system.
>> Is anybody can suggest a working DVB-S2 card + linux driver which is
>> capable to lock here stable? (AMOS 4.0W, 10.723Ghz V, 30000)
>> thank you,
>> basq
> I don't have any problem with lock with my last dvb-liplianin drivers
> (multiproto) and HVR-4000.
> But the rolloff is automatically set by the driver to 0.35.
> Here is the automatically done scan from vdr-1.7.0. I've edited the rolloff to
> 0.20 but it doesn't seems to heave any influence even if I disable update of
> channels.
> The video on FTA channels is something like not fluent (only RTL doesn't have
> this problem) - but it could be that no sound one that channels is
> broadcasted.
> BR,
> Ales
> RTL
> Klub;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:179:177=hun:180:B00:1:100:1:0
> tv2;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:174:172=hun:175:B00:2:100:1:0
> m1;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:169:0:170:B00:3:100:1:0
> m2;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:164:0:165:B00:4:100:1:0
> TV Deko;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:159:0:0:B00:5:100:1:0
> TV Paprika;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:154:0:0:B00:6:100:1:0
> Kidsco;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:149:0:0:B00:7:100:1:0
> Minimax;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:144:0:0:B00:8:100:1:0
> XXXtreme;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:0:0:0:0:9:100:1:0
> MTV
> Hungary;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:134:0:0:B00:10:100:1:0
> VH1;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:129:0:0:B00:11:100:1:0
> Magyar
> ATV;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:124:0:0:B00:12:100:1:0
> Playboy TV;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:0:0:0:0:13:100:1:0
> Echo TV;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:114:0:0:B00:14:100:1:0
> HÆlðzat
> TV;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:109:0:0:B00:15:100:1:0
> MTV2;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:104:0:0:B00:16:100:1:0
> Reflektor;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:99:0:0:B00:17:100:1:0
> film2+;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:94:0:0:B00:18:100:1:0
> Cool;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:89:0:0:B00:19:100:1:0
> PoØn;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:84:0:0:B00:20:100:1:0
> sorozat+;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:79:0:0:B00:21:100:1:0
> film+;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:74:0:0:B00:22:100:1:0
> Fishing and
> Hunting;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:69:0:0:B00:23:100:1:0
> Sport Klub;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:64:0:0:B00:24:100:1:0
> Sport
> Klub+;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:59:0:0:B00:25:100:1:0
> Doq;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:54:0:0:B00:26:100:1:0
> test1;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:0:0:0:0:27:100:1:0
> test2;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:0:0:0:0:28:100:1:0
> test3;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:39:0:0:B00:29:100:1:0
> HŦr TV;T-KÆbel:10723:vC23M5O20S1:S4.0W:30000:34:0:0:B00:30:100:1:0
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem
2008-11-06 8:01 ` Kovacs Balazs
@ 2008-11-06 9:11 ` Ales Jurik
0 siblings, 0 replies; 15+ messages in thread
From: Ales Jurik @ 2008-11-06 9:11 UTC (permalink / raw)
To: Kovacs Balazs; +Cc: linux-dvb
On Thursday 06 of November 2008, Kovacs Balazs wrote:
> Ales, can you test me what happens if you just want to lock on these TP's?
> Is it stable for you?
>
> Can you tun a szap and watch it if the card lost the lock or is it locked
> stable?
>
> I've tried a Skystar HD2 card with s2-liplianin drivers but the result is
> the same. Sometimes I can scan the TP's if the card is locked for a 1-2
> second period, then it losts the lock.
>
> This could be a driver issue, because under Windows with the original TT
> WDM or BDA drivers the TT3200 works perfect on these TP's.
>
> thanx,
>
> basq
>
Hi Balasz,
the reception is stable and without any problem. It is possible to watch
(tested on RTL Klub).
I'm afraid it is a problem with stb0899 linux driver. I've also this card,
tried to find the bug (I've found one in stb6100.c tuning procedure) but it
was not sufficient. Also under Windows it was without problem. After many
hours spent with this card I've bougth HVR-4000, put TT S2-3200 into my table
and don't have problem anymore.
If you want to do some more test you could contact me off-list.
Below output from szap.
BR,
Ales
$ ./szap2 -c ./channels.conf -n 1
reading channels from file './channels.conf'
zapping to 1 'RTL Klub;T-KÆbel':
delivery DVB-S2, modulation 8PSK
sat 3, frequency 10723 MHz V, symbolrate 30000000, coderate 2/3, rolloff 0.20
vpid 0x00b3, apid 0x00b1, sid 0x00b4
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 01 | signal c440 | snr 0000 | ber 00000000 | unc 00000000 |
status 1f | signal c3c0 | snr c666 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c3c0 | snr c666 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c3c0 | snr c666 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c440 | snr c666 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c3c0 | snr c7ff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c440 | snr c7ff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c440 | snr c7ff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c3c0 | snr c7ff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c440 | snr c7ff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c440 | snr c7ff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c440 | snr c7ff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c440 | snr c7ff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c440 | snr c666 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c440 | snr c7ff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c440 | snr c666 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c440 | snr c7ff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c440 | snr c7ff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c440 | snr c7ff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c440 | snr c666 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 15+ messages in thread
* [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem
@ 2008-11-10 14:47 lucian orasanu
0 siblings, 0 replies; 15+ messages in thread
From: lucian orasanu @ 2008-11-10 14:47 UTC (permalink / raw)
To: linux-dvb
Will Manu Abraham merge patches from Alex Betis to st0899_algo.c???
because the lock is much faster and stabile. where without on some channels lock is afther a few minits.
I can provide some logs with and without patch.
Cheers.
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 15+ messages in thread
* [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem
@ 2008-11-11 9:33 Newsy Paper
2008-11-11 9:41 ` Kovacs Balazs
0 siblings, 1 reply; 15+ messages in thread
From: Newsy Paper @ 2008-11-11 9:33 UTC (permalink / raw)
To: linux-dvb
hi!
anybody asked at ŧwinhan or Technotrend for chip details?
Aren't they cooperative?
kind regards
Newsy
--- Alex Betis <alex.betis@gmail.com> schrieb am Mo,
3.11.2008:
>I have Twinhan 1041, same chipset as your card and I
>have
> the same behavior
> with S2 channels.
> Some can be locked, some can't. I think it's a
> known issue with stb0899
> chips, I mean known here in the list.
>
> Hope someone will be able to fix that. DVB-S2 scannint
> and
> locking is done
> in the chip itself, so without knowledge of chip
> internals it will be very hard to resolve that issue.
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem
2008-11-11 9:33 Newsy Paper
@ 2008-11-11 9:41 ` Kovacs Balazs
0 siblings, 0 replies; 15+ messages in thread
From: Kovacs Balazs @ 2008-11-11 9:41 UTC (permalink / raw)
To: Newsy Paper; +Cc: linux-dvb
I installed the latest s2-liplianin with the patches igor released last weekend. Now it works OK for me!!!
thx
basq
> hi!
>
> anybody asked at ŧwinhan or Technotrend for chip details?
> Aren't they cooperative?
>
>
> kind regards
>
> Newsy
> --- Alex Betis <alex.betis@gmail.com> schrieb am Mo,
> 3.11.2008:
>>I have Twinhan 1041, same chipset as your card and I
>>have
>> the same behavior
>> with S2 channels.
>> Some can be locked, some can't. I think it's a
>> known issue with stb0899
>> chips, I mean known here in the list.
>> Hope someone will be able to fix that. DVB-S2 scannint
>> and
>> locking is done
>> in the chip itself, so without knowledge of chip
>> internals it will be very hard to resolve that issue.
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 15+ messages in thread
* [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem
@ 2008-11-11 11:40 Newsy Paper
0 siblings, 0 replies; 15+ messages in thread
From: Newsy Paper @ 2008-11-11 11:40 UTC (permalink / raw)
To: linux-dvb
I thougt Igors patch for high SR is for dvb-s(1) only.
anybody can confirm that dvb-s2 with SR 30000 and Fec 3/4 would now work? Transponders are at Thor 1°W or Hispasat 30°W (Meo)
regards
Newsy
Kovacs Balazs basq at bitklub.hu
Tue Nov 11 10:41:35 CET 2008
>I installed the latest s2-liplianin with the patches igor released last >weekend. Now it works OK for me!!!
>
>thx
>basq
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2008-11-11 11:41 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-11-03 10:51 [linux-dvb] S2API + TT3200 + Amos4w 10.723 S2 problem Kovacs Balazs
2008-11-03 12:04 ` Alex Betis
2008-11-03 12:59 ` Goga777
2008-11-04 8:00 ` Kovacs Balazs
2008-11-04 9:08 ` oleg roitburd
2008-11-04 9:31 ` Alex Betis
2008-11-04 12:45 ` Kovacs Balazs
[not found] ` <4a5931310811040335i7722125fwc0efefbf01cac93d@mail.gmail.com>
2008-11-04 12:42 ` [linux-dvb] Fwd: " Kovacs Balazs
2008-11-04 9:18 ` [linux-dvb] " Ales Jurik
2008-11-06 8:01 ` Kovacs Balazs
2008-11-06 9:11 ` Ales Jurik
-- strict thread matches above, loose matches on Subject: below --
2008-11-10 14:47 lucian orasanu
2008-11-11 9:33 Newsy Paper
2008-11-11 9:41 ` Kovacs Balazs
2008-11-11 11:40 Newsy Paper
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox