From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.gmx.net ([213.165.64.20]) by www.linuxtv.org with smtp (Exim 4.63) (envelope-from ) id 1L0EG5-0001df-9b for linux-dvb@linuxtv.org; Wed, 12 Nov 2008 12:51:42 +0100 Date: Wed, 12 Nov 2008 12:51:07 +0100 From: "Hans Werner" In-Reply-To: Message-ID: <20081112115107.217170@gmx.net> MIME-Version: 1.0 References: <20081112023112.94740@gmx.net> To: Goga777 Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] [PATCH] scan-s2: fixes and diseqc rotor support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: > > I have attached two patches for scan-s2 at > http://mercurial.intuxication.org/hg/scan-s2. > > = > > Patch1: Some fixes for problems I found. QAM_AUTO is not supported by > all drivers, > > in particular the HVR-4000, so one needs to use QPSK as the default and > ensure that > > settings are parsed properly from the network information -- the new S2 > FECs and > > modulations were not handled. > > = > > Patch2: Add DiSEqC 1.2 rotor support. Use it like this to move the dish > to the correct > > position for the scan: > > scan-s2 -r 19.2E -n dvb-s/Astra-19.2E > > or > > scan-s2 -R 2 -n dvb-s/Astra-19.2E > > = > > A file (rotor.conf) listing the rotor positions is used (NB: rotors vary > -- do check your > > rotor manual). > = > = > thanks for your patch. > = > btw - could you scan dvb-s2 (qpsk & 8psk) channels with scan-s2 and > hvr4000 ? with which drivers ? > = > Goga Yes I could scan DVB-S and DVB-S2 (both QPSK and 8PSK) in one command with = the = HVR4000. The satellite delivery system descriptor parsing is used to set DV= B-S/-S2 and QPSK/8PSK and FEC. I used the s2-liplianin drivers (only because I am also = testing a stb0899 vp1041 card at the moment). It should also work with the v4l-dvb dr= ivers but I didn't try yet. Also there is some network information on 19.2E which points to 23.5E so th= e rotor is moved during the scan to 23.5E and then back to 19.2E depending on the transponde= r. :). Hans -- = Release early, release often. Psssst! Schon vom neuen GMX MultiMessenger geh=F6rt? Der kann`s mit allen: = http://www.gmx.net/de/go/multimessenger _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb