[linux-dvb] errormessages skystar2 rev 2.8b with latest v4l-dvb branch

[linux-dvb] errormessages skystar2 rev 2.8b with latest v4l-dvb branch

[Halim Sahin]

Hi,
I.ve installed latest drivers from http://linuxtv.org/hg/v4l-dvb.
My kernel is 2.6.26 kernel (debian lenny).

When I type 
modprobe b2c2_flexcop_pci 
I get:



[91664.058433] b2c2-flexcop: i2c master_xfer failed
[91664.058734] b2c2-flexcop: i2c master_xfer failed
[91664.058793] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
[91664.058851] CX24123: wrong demod revision: 87

The card seems to be working but I.ll do more tests.
What is the problem here.
BR.
Halim


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] errormessages skystar2 rev 2.8b with latest v4l-dvb branch

[sinter.mann]

Hello Halim,

Forget about the Mercurial tree........

1. Get a vanilla kernel 2.6.27 plus patch 2.6.28-rc6 from 
http://www.eu.kernel.org/

2. Prepare a kernel linux-2.6.28-rc6.

3. Download the appended patchset: http://www.htpc-
forum.de/forum/index.php?showtopic=4944&st=0&#entry31527

4. Unpack the patchset to /usr/src/linux.

5. Move all files in /usr/src/linux/skystarxyz to /usr/src/linux.

6. For a 32-bit architecture execute: ./sky28 32, for a 64-bit one ./sky28 64.

7. Then move on with "make xconfig", make your config, then continue with "make 
modules && make bzlilo, make modules_install.....

Enjoy!

Cheers

Uwe

-- 
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] errormessages skystar2 rev 2.8b with latest v4l-dvb branch

[Halim Sahin]

Hi,

I am not using a skystar rev 2.8!!
My question was why these messages are shown with this card wich worked fine
in the past (without) any errormessages during module loading.
THanks for your response.
Halim


On Sa, Nov 22, 2008 at 03:58:20 +0100, sinter.mann@gmx.de wrote:
> Hello Halim,
> 
> Forget about the Mercurial tree........
> 
> 1. Get a vanilla kernel 2.6.27 plus patch 2.6.28-rc6 from 
> http://www.eu.kernel.org/
> 
> 2. Prepare a kernel linux-2.6.28-rc6.
> 
> 3. Download the appended patchset: http://www.htpc-
> forum.de/forum/index.php?showtopic=4944&st=0&#entry31527
> 
> 4. Unpack the patchset to /usr/src/linux.
> 
> 5. Move all files in /usr/src/linux/skystarxyz to /usr/src/linux.
> 
> 6. For a 32-bit architecture execute: ./sky28 32, for a 64-bit one ./sky28 64.
> 
> 7. Then move on with "make xconfig", make your config, then continue with "make 
> modules && make bzlilo, make modules_install.....
> 
> Enjoy!
> 
> Cheers
> 
> Uwe
> 
> -- 
> Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
> 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Halim Sahin
E-Mail:				
halim.sahin (at) t-online.de

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb