From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from qmta07.westchester.pa.mail.comcast.net ([76.96.62.64]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1L9XJ9-00014z-BE for linux-dvb@linuxtv.org; Mon, 08 Dec 2008 05:01:20 +0100 Date: Sun, 7 Dec 2008 23:00:40 -0500 From: Jeff DeFouw To: Josh Borke Message-ID: <20081208040040.GA7855@blorp.plorb.com> References: <7d91b3760812071828w57ba50d6h979d9d0f703d3080@mail.gmail.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <7d91b3760812071828w57ba50d6h979d9d0f703d3080@mail.gmail.com> Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] Hauppauge HVR-1800 Analog issues List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: On Sun, Dec 07, 2008 at 09:28:17PM -0500, Josh Borke wrote: > I recently upgraded to Fedora 10 and decided to try to get my Hauppauge > HVR-1800 working. I thought everything was working fine and well because I > could run 'tvtime -d /dev/video0' and 'cat /dev/video1 > /tmp/test.mpg' and > things worked but then I rebooted and it all went to pot. Now when I run > 'cat /dev/video1 > /tmp/test.mpg' the output of tvtime becomes wavy and > distorted. I tried loading both cx25840 and cx23885 with debug=1 but that > didn't help. I also tried with the latest v4l-dvb sources > (v4l-dvb-7100e78482d7) with the same result. > > I've attached the dmesg in hopes of being some help. > > To recap, I can 'tvtime -d /dev/video0' and I get a great picture. As soon > as I 'cat /dev/video1 > /tmp/test.mpg' the picture goes wavy. I found the same thing while testing the analog tuner support (which I don't normally use). It only happened the first time after boot. Unloading all of the modules (run "make rmmod" in the v4l-dvb sources) and reloading them always fixed it for me. Also, make sure the tuner module is loaded after that. Mine doesn't auto-load for some reason. -- Jeff DeFouw _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb