From: Magnus Damm <magnus.damm@gmail.com>
To: video4linux-list@redhat.com
Cc: g.liakhovetski@gmx.de
Subject: [PATCH 01/03] sh_mobile_ceu: use new pixel format translation code
Date: Wed, 10 Dec 2008 16:44:42 +0900 [thread overview]
Message-ID: <20081210074442.5727.31628.sendpatchset@rx1.opensource.se> (raw)
In-Reply-To: <20081210074435.5727.93374.sendpatchset@rx1.opensource.se>
From: Magnus Damm <damm@igel.co.jp>
This patch converts the sh_mobile_ceu driver to make use
of the new pixel format translation code. Only pass-though
mode at this point.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
---
drivers/media/video/sh_mobile_ceu_camera.c | 83 +++++++++++++++++++---------
1 file changed, 57 insertions(+), 26 deletions(-)
--- 0008/drivers/media/video/sh_mobile_ceu_camera.c
+++ work/drivers/media/video/sh_mobile_ceu_camera.c 2008-12-09 22:56:02.000000000 +0900
@@ -434,8 +434,7 @@ static int sh_mobile_ceu_set_bus_param(s
return 0;
}
-static int sh_mobile_ceu_try_bus_param(struct soc_camera_device *icd,
- __u32 pixfmt)
+static int sh_mobile_ceu_try_bus_param(struct soc_camera_device *icd)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
@@ -450,25 +449,60 @@ static int sh_mobile_ceu_try_bus_param(s
return 0;
}
+static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
+ struct soc_camera_format_xlate *xlate)
+{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ int ret;
+ int formats = 0;
+
+ ret = sh_mobile_ceu_try_bus_param(icd);
+ if (ret < 0)
+ return 0;
+
+ switch (icd->formats[idx].fourcc) {
+ default:
+ /* Generic pass-through */
+ formats++;
+ if (xlate) {
+ xlate->host_fmt = icd->formats + idx;
+ xlate->cam_fmt = icd->formats + idx;
+ xlate->buswidth = icd->formats[idx].depth;
+ xlate++;
+ dev_dbg(&ici->dev,
+ "Providing format %s in pass-through mode\n",
+ icd->formats[idx].name);
+ }
+ }
+
+ return formats;
+}
+
static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
__u32 pixfmt, struct v4l2_rect *rect)
{
- const struct soc_camera_data_format *cam_fmt;
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ const struct soc_camera_format_xlate *xlate;
int ret;
- /*
- * TODO: find a suitable supported by the SoC output format, check
- * whether the sensor supports one of acceptable input formats.
- */
- if (pixfmt) {
- cam_fmt = soc_camera_format_by_fourcc(icd, pixfmt);
- if (!cam_fmt)
- return -EINVAL;
+ xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+ if (!xlate) {
+ dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
+ return -EINVAL;
+ }
+
+ switch (pixfmt) {
+ case 0: /* Only geometry change */
+ ret = icd->ops->set_fmt(icd, pixfmt, rect);
+ break;
+ default:
+ ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect);
}
- ret = icd->ops->set_fmt(icd, pixfmt, rect);
- if (pixfmt && !ret)
- icd->current_fmt = cam_fmt;
+ if (pixfmt && !ret) {
+ icd->buswidth = xlate->buswidth;
+ icd->current_fmt = xlate->host_fmt;
+ }
return ret;
}
@@ -476,19 +510,15 @@ static int sh_mobile_ceu_set_fmt(struct
static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
struct v4l2_format *f)
{
- const struct soc_camera_data_format *cam_fmt;
- int ret = sh_mobile_ceu_try_bus_param(icd, f->fmt.pix.pixelformat);
-
- if (ret < 0)
- return ret;
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ const struct soc_camera_format_xlate *xlate;
+ __u32 pixfmt = f->fmt.pix.pixelformat;
- /*
- * TODO: find a suitable supported by the SoC output format, check
- * whether the sensor supports one of acceptable input formats.
- */
- cam_fmt = soc_camera_format_by_fourcc(icd, f->fmt.pix.pixelformat);
- if (!cam_fmt)
+ xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+ if (!xlate) {
+ dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
return -EINVAL;
+ }
/* FIXME: calculate using depth and bus width */
@@ -504,7 +534,7 @@ static int sh_mobile_ceu_try_fmt(struct
f->fmt.pix.height &= ~0x03;
f->fmt.pix.bytesperline = f->fmt.pix.width *
- DIV_ROUND_UP(cam_fmt->depth, 8);
+ DIV_ROUND_UP(xlate->host_fmt->depth, 8);
f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
/* limit to sensor capabilities */
@@ -576,6 +606,7 @@ static struct soc_camera_host_ops sh_mob
.owner = THIS_MODULE,
.add = sh_mobile_ceu_add_device,
.remove = sh_mobile_ceu_remove_device,
+ .get_formats = sh_mobile_ceu_get_formats,
.set_fmt = sh_mobile_ceu_set_fmt,
.try_fmt = sh_mobile_ceu_try_fmt,
.reqbufs = sh_mobile_ceu_reqbufs,
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next prev parent reply other threads:[~2008-12-10 7:46 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-10 7:44 [PATCH 00/03] video: nv1x/nvx1 support for the sh_mobile_ceu driver V2 Magnus Damm
2008-12-10 7:44 ` Magnus Damm [this message]
2008-12-10 7:44 ` [PATCH 02/03] sh_mobile_ceu: add NV12 and NV21 support Magnus Damm
2008-12-13 21:52 ` Guennadi Liakhovetski
2008-12-15 2:40 ` Magnus Damm
2008-12-15 7:44 ` Guennadi Liakhovetski
2008-12-10 7:44 ` [PATCH 03/03] sh_mobile_ceu: add NV16 and NV61 support Magnus Damm
2008-12-13 21:56 ` Guennadi Liakhovetski
2008-12-14 1:21 ` Mauro Carvalho Chehab
2008-12-12 8:37 ` [PATCH 00/03] video: nv1x/nvx1 support for the sh_mobile_ceu driver V2 morimoto.kuninori
2008-12-12 9:03 ` Magnus Damm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081210074442.5727.31628.sendpatchset@rx1.opensource.se \
--to=magnus.damm@gmail.com \
--cc=g.liakhovetski@gmx.de \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox