From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp-vbr14.xs4all.nl ([194.109.24.34]:1358 "EHLO smtp-vbr14.xs4all.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754762Ab0F3Rst (ORCPT ); Wed, 30 Jun 2010 13:48:49 -0400 Date: Wed, 30 Jun 2010 19:48:45 +0200 (CEST) From: Hans Houwaard To: linux-media@vger.kernel.org, mo ucina Message-ID: <20081599.48.1277920125030.JavaMail.root@ginder> In-Reply-To: <4C2B33B6.90408@gmail.com> Subject: Re: [linux-dvb] TeVii S470 in mythtv - diseqc problems MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: I had the same issue, I have a combination of Hauppauge and Tevii card. The problems arrise when the order of loading of the cards differ from the order of card installed in MythTV. I have added module options to get the modules to use the same /dev/dvb device on boot. Hope this helps for you, Hans ----- Oorspronkelijk bericht ----- Van: "O&M Ugarcina" Aan: linux-dvb@linuxtv.org Verzonden: Woensdag 30 juni 2010 14:08:22 Onderwerp: [linux-dvb] TeVii S470 in mythtv - diseqc problems Hello Guys, Just installed a S470 into my mythbox , fedora 12 kernel 2.6.32.14-127.fc12.i686.PAE . Myth is .23 the most recent fedora package , the drivers for dvb card I have at the moment were pulled in 2010-04-01 . I assume they are pretty current . The problem that I have is as follows : Most of my viewing is done on a Satellite connected to diseqc port 2 , and myth tunes into that with no probs at all , but occasionally I try to watch a channel that is on a second satellite - port 1 and here things fail . Myth tries to tune into the channel - then times out with error , during this the dvb driver crashes , and when I try to retune again with myth there is no lock on either satellite . So I need to restart pc , then everything comes back on port 2 and myth is able to tune again channels within that first satellite . Any one else experienced diseqc issues with this card and myth ? Second question what is the tool of choice to use to scan dvbs2 satellites ? I tried dvbscan but it only picked up dvbs transponders , on dvbs2 it failed to tune . I saw that there used to be this utillity scan-s2 , but looks like it was abandoned a couple of years ago and has not been maintained since . So how do you guys do a transponder scan for dvbs2 ? Best Regards Milorad _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@vger.kernel.org linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb